[greenman100]

Please post the highest Prime95 stable overclock you've attained, no matter what the cooling or mods you did.

I have a DLT3C JIUHB0310XPMW, with the following:

Larger heatsink on northbridge, with fan
Original NB heatsink on SB
D-tek WW, Via Aqua 1300, single pass 2-342, torin blower with shoud, AS5, 1/2" ID clearflex 60.

Temps cannot be measured accurately, but ambient is a thermostat controlled independiently verified 73-76F

Highest P95 OC: 215x12=2580 @2.00vcore in bios, 1.95 in MBM5.

I'm just looking for something to shoot for here. It's fun to try to keep up with the mobile barton guys. I might pick up 50mhz from cooling the backside of my motherboard + MOSFET cooling, we'll see.

[oc_byagi]

Originally Posted by greenman100

Please post the highest Prime95 stable overclock you've attained, no matter what the cooling or mods you did.

I have a DLT3C JIUHB0310XPMW, with the following:

Larger heatsink on northbridge, with fan
Original NB heatsink on SB
D-tek WW, Via Aqua 1300, single pass 2-342, torin blower with shoud, AS5, 1/2" ID clearflex 60.

Temps cannot be measured accurately, but ambient is a thermostat controlled independiently verified 73-76F

Highest P95 OC: 215x12=2580 @2.00vcore in bios, 1.95 in MBM5.

I'm just looking for something to shoot for here. It's fun to try to keep up with the mobile barton guys. I might pick up 50mhz from cooling the backside of my motherboard + MOSFET cooling, we'll see.

Are you hosting this thread to collect 1700+ overclocks or any tbred/barton/mobile overclocks??? My mobile's at 241x11, mostly stable, though I have not tested them too much due to memory RMA.
241x11=2.65ghz @1.85v, 3-4-4-11 @1.7v, NB Cooled/SB Passive Heatsink/Mosfet Passive Heatsink/Koolance Water Cooled (CPU-300)

[greenman100]

Originally Posted by oc_byagi

Are you hosting this thread to collect 1700+ overclocks or any tbred/barton/mobile overclocks??? My mobile's at 241x11, mostly stable, though I have not tested them too much due to memory RMA.
241x11=2.65ghz @1.85v, 3-4-4-11 @1.7v, NB Cooled/SB Passive Heatsink/Mosfet Passive Heatsink/Koolance Water Cooled (CPU-300)

I am mostly interested in 1700+ overclocks, as it would be a more fitting goal for me. You mobile guys have a 200mhz advantage on me. Thanks for the info, though.

[namanut]

I have a DLT3C JUIHB in an Epox 8rda3+ with thermalright 947U and a tornado 92mm. I run a dryer duct from my a/c unit to my cpu fan and at 1.95 volts it usually runs bout 38C full load. Its prime95 stable at 212x12 but anything ovr that it kicks out. Also just curious even though it doesnt get above like 42-43C if i go to 2.0 volts it just flat out freaks out no matter what mghz i try it at. Is that just th limit sometimes? anyway theres your info and also i've booted into windows and surfed a bit @ 2640mghz. However gaming or benchmarking are strictly prohibitd whn i do that

[The O.C]

man i cant wait til i get access to buy/sell then i will get a 1700+