Mixing Dangerden, Aqua Pc, and Swiftech...Will these componets mix?

computerpro3 · 06-04-04, 08:52 PM

Hi,
I was planning on getting an lian li pc75 and going all out on a watercooling system. My current one is just not enough, despite getting me 4ghz. I was looking at aqua pc, and their stuff is gorgeous, but they do not make any tec units, which is a must have. So i was wondering...would all these componets fit together and would their be any major problems with them?

aqua computer res = 73
aqua computer 3 fan rad = 113
aqua computer rad grill = 37
aqua computer res mounting bracket = 13
swiftech mcw500whatever cpu tec block 226w = 110
danger den maze 4 gpu tec 80w = 59
172w tec unit to replace 80w with = 30
meanwell 12v supply= 118

currently have eheim 1250 pump

one thing that I was wondering about was the tubing size....aquapc does metric tubing, and i know swiftech is 3/8id. So if I got the swiftech and dangerden with 3/8 id tubing, that *should* fit with the aqua pc gear too, right? I'm a little bit confused about the europen tubing size..

also, with that setup, would my eheim 1250 be enough or should I invest in the swiftech pump? Any and all help would be appreciated.

InvisGreenMan · 06-04-04, 09:11 PM

I believe the 3/8 will fit. Definately get the MCP600 for the restrictive tubing. I have one and it is VERY quiet.

06-04-04, 08:52 PM	Thread Starter #1
computerpro3 Member Join Date: Nov 2003	Mixing Dangerden, Aqua Pc, and Swiftech...Will these componets mix? Hi, I was planning on getting an lian li pc75 and going all out on a watercooling system. My current one is just not enough, despite getting me 4ghz. I was looking at aqua pc, and their stuff is gorgeous, but they do not make any tec units, which is a must have. So i was wondering...would all these componets fit together and would their be any major problems with them? aqua computer res = 73 aqua computer 3 fan rad = 113 aqua computer rad grill = 37 aqua computer res mounting bracket = 13 swiftech mcw500whatever cpu tec block 226w = 110 danger den maze 4 gpu tec 80w = 59 172w tec unit to replace 80w with = 30 meanwell 12v supply= 118 currently have eheim 1250 pump one thing that I was wondering about was the tubing size....aquapc does metric tubing, and i know swiftech is 3/8id. So if I got the swiftech and dangerden with 3/8 id tubing, that should fit with the aqua pc gear too, right? I'm a little bit confused about the europen tubing size.. also, with that setup, would my eheim 1250 be enough or should I invest in the swiftech pump? Any and all help would be appreciated. __________________ AMD Athlon 64 Fx-60 @ 3.0ghz and Opteron 146 @ 3.5ghz DFI SLI-DR with Chilly1 Phase Change -60C 2GB Mushkin Redline XP4000 @ 267mhz and 4GB OCZ 2-3-2-5 2x XFX 7800GTX 512mb and 2x EVGA 7800GTX 256mb 4x Raptor 150GB, 4x 500GB Seagate Emu 0404 Professional Sound Card Modified/Silenced/Sleeved Zippy 700w PSU and PCP&C 510 SLI Silverstone TJ07/Coolermaster ATC 101b/ Silverstone LC18 Logitech Z680 5.1 Surround Sound System Monster HTS3500 -> MisterX PPA2 -> Grado RS-1
	QUOTE Thanks

06-04-04, 09:11 PM	#2
InvisGreenMan Member Join Date: Jan 2004 Location: South Dakota	I believe the 3/8 will fit. Definately get the MCP600 for the restrictive tubing. I have one and it is VERY quiet.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Mixing Dangerden, Aqua Pc, and Swiftech...Will these componets mix?

Internet Services

Website Development

Tech Hardware