[stan03]

What is a "EARLY_UNIT_END" this is on my Dell which is not overclocked... it did not crash either. i just realized this happened. was this something bad on my end or stanfords?

Code:

[15:48:48] Folding@home Gromacs Core
[15:48:48] Version 1.65 (May 6, 2004)
[15:48:48] 
[15:48:48] Preparing to commence simulation
[15:48:48] - Looking at optimizations...
[15:48:48] - Created dyn
[15:48:48] - Files status OK
[15:48:49] - Expanded 511284 -> 2524929 (decompressed 493.8 percent)
[15:48:49] - Starting from initial work packet
[15:48:49] 
[15:48:49] Project: 909 (Run 96, Clone 99, Gen 34)
[15:48:49] 
[15:48:49] Assembly optimizations on if available.
[15:48:49] Entering M.D.
[15:48:56] Protein: p909_vill_str0
[15:48:56] 
[15:48:56] Writing local files
[15:49:01] Extra SSE boost OK.
[15:49:01] Writing local files
[15:49:01] Completed 0 out of 250000 steps  (0)
[16:01:26] Writing local files
[16:01:26] Completed 2500 out of 250000 steps  (1)
[16:13:46] Writing local files
[16:13:46] Completed 5000 out of 250000 steps  (2)
[16:26:06] Writing local files
[16:26:06] Completed 7500 out of 250000 steps  (3)
[16:38:26] Writing local files
[16:38:26] Completed 10000 out of 250000 steps  (4)
[16:50:46] Writing local files
[16:50:46] Completed 12500 out of 250000 steps  (5)
[17:03:19] Writing local files
[17:03:19] Completed 15000 out of 250000 steps  (6)
[17:15:54] Writing local files
[17:15:54] Completed 17500 out of 250000 steps  (7)
[17:28:23] Writing local files
[17:28:23] Completed 20000 out of 250000 steps  (8)
[17:40:45] Writing local files
[17:40:45] Completed 22500 out of 250000 steps  (9)
[17:53:09] Writing local files
[17:53:09] Completed 25000 out of 250000 steps  (10)
[18:05:40] Writing local files
[18:05:40] Completed 27500 out of 250000 steps  (11)
[18:17:59] Writing local files
[18:17:59] Completed 30000 out of 250000 steps  (12)
[18:30:18] Writing local files
[18:30:18] Completed 32500 out of 250000 steps  (13)
[18:42:39] Writing local files
[18:42:39] Completed 35000 out of 250000 steps  (14)
[18:55:02] Writing local files
[18:55:02] Completed 37500 out of 250000 steps  (15)
[19:07:31] Writing local files
[19:07:31] Completed 40000 out of 250000 steps  (16)
[19:19:51] Writing local files
[19:19:51] Completed 42500 out of 250000 steps  (17)
[19:31:46] Gromacs cannot continue further.
[19:31:46] Going to send back what have done.
[19:31:46] logfile size: 10139
[19:31:46] - Writing 10675 bytes of core data to disk...
[19:31:46]   ... Done.
[19:31:46] 
[19:31:46] Folding@home Core Shutdown: EARLY_UNIT_END
[19:31:48] CoreStatus = 72 (114)
[19:31:48] Sending work to server


[19:31:48] + Attempting to send results
[19:31:49] + Results successfully sent
[19:31:49] Thank you for your contribution to Folding@home.
[19:31:53] - Preparing to get new work unit...
[19:31:53] + Attempting to get work packet
[19:31:53] - Connecting to assignment server
[19:31:54] - Successful: assigned to (171.64.122.144).
[19:31:54] + News From Folding@Home: Welcome to Folding@Home
[19:31:54] Loaded queue successfully.
[19:32:00] + Closed connections
[19:32:05] 
[19:32:05] + Processing work unit
[19:32:05] Core required: FahCore_78.exe
[19:32:05] Core found.
[19:32:05] Working on Unit 00 [June 15 19:32:05]
[19:32:05] + Working ...
[19:32:05] 
[19:32:05] *------------------------------*
[19:32:05] Folding@home Gromacs Core
[19:32:05] Version 1.65 (May 6, 2004)
[19:32:05] 
[19:32:05] Preparing to commence simulation
[19:32:05] - Looking at optimizations...
[19:32:05] - Created dyn
[19:32:05] - Files status OK
[19:32:06] - Expanded 509173 -> 2524929 (decompressed 495.8 percent)
[19:32:06] - Starting from initial work packet
[19:32:06] 
[19:32:06] Project: 909 (Run 4, Clone 17, Gen 44)
[19:32:06] 
[19:32:06] Assembly optimizations on if available.
[19:32:06] Entering M.D.
[19:32:12] Protein: p909_vill_str0
[19:32:12] 
[19:32:12] Writing local files
[19:32:17] Extra SSE boost OK.
[19:32:18] Writing local files
[19:32:18] Completed 0 out of 250000 steps  (0)
[19:44:35] Writing local files
[19:44:36] Completed 2500 out of 250000 steps  (1)
[19:56:59] Writing local files
[19:56:59] Completed 5000 out of 250000 steps  (2)
[20:09:24] Writing local files
[20:09:24] Completed 7500 out of 250000 steps  (3)

[Audioaficionado]

What kind of processor/chipset does that Dell have. What's the operation system and hardware operating parameters?

It could very well be a bad WU. Sometimes they create bad models that just don't work.

Was this the only WU on that Dell to do this?

[stan03]

CPU= 1.3 Ghz Willy. Im not sure what the chipset is.
RAM=512 PC800 RDRAM
OS=WinXP Pro

whats the hardware operating parameter?

yes this is the first WU i have seen do this. but again i might miss some wus because i don't watch 24/7

[Miralcos]

Looks kinda odd to me as well. It looks as if it ended soon on purpose because it sent what you had already finished in to stanford. In the past when I got a bad WU, it wouldn't send anything back, it would just download a new one.

[stan03]

i just realized i got 7 points for this wu... it was supposed to be worth 41... so maybe it was just bad, and they gave me a few points for what i had done?

[hrdwrjnkie]

Definately must have been somthing wrong with the WU, got a ways through calculation and just couldn't calculate anymore... weird

[Audioaficionado]

Originally Posted by stan03

whats the hardware operating parameter?

Any clock speeds, RAM timings, voltages, etc.

You gave some of it already when you listed some of your harware.

[stan03]

ok well its a stock dell, no oc or anything, and it hasn't happened again, so ill just guess the wu was bad.