i was wondering if i could bump the vcore volt to 1.95(1.85) now.
t-bird [email protected]
epox 8kha
256 mb of 2100 ram
300w psu
t-bird [email protected]
epox 8kha
256 mb of 2100 ram
300w psu
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
how far can i push the vcore
- Thread starter KnifeBoy
- Start date
- Joined
- Aug 13, 2001
- Location
- Boston, MA
yes, you'll have to refer to the guides, they will tell you how, you have to mess around with the mobo hardware.
- Joined
- Jan 13, 2001
- Location
- Minneapolis, MN
What HSF unit do you have? You really need to have a good one to push beyond 1.85 volts vcore. (Glaciator, SK6, MC462A).
Your case cooling should be good as well, I'd say at least 40 CFM each of intake and exhaust, maybe a good blowhole too.
SickBoy
Your case cooling should be good as well, I'd say at least 40 CFM each of intake and exhaust, maybe a good blowhole too.
SickBoy
- Joined
- Jan 23, 2001
- Location
- Pittsburgh Pa
You should be fine at the maximum setting of most boards (1.85v, often reported as 1.92v), provided you have adequate cooling. You will need something more than the factory hsf in my opinion. Keep in mind, increased voltage equals increased temperatures.
