Oc'd my new rig...2500+

My rig as in sig:

NF7-s v2
xp 2500+ locked
(2x256) Pc3200 Kingston Value Ram
420 watt thermaltake psu
slk-947u/92mm panaflo

Results with Sandra:
@1.7v
....................CPU Bench ...........ram timings................ram bench
209X11 .........9513/3622...........2.5,2,3,11.................3205/3003

210x11 ..........9539/3633...........3,3,3,11 ...................3189/2978

211x11 ...........9603/3653............3,3,3,11..... ..............3195/2987

@1.775v

213x11 ...........9662/3677 ............2.5,2,3,11 ...............3252/3051



Tried 214x11 at 1.775 and got an error loading into windows. Not sure if I should raise the vcore any more. Ram is set at 2.7v. Temps are 37c idle and 43-44 load. Is this consistent with what everyone else gets with their locked 2500+?

Actually, you're above the old average there, congratulations.

Nice system.

Your temps seem OK for another voltage hit or two but in the end it matters if you can do stability tests like Prime95 Torture Tests for half a day or more without the program displaying any errors or not at those high overclocks.

Post the codes if you have them, is this CPU made well into 2004?

TxAMD said:

Tried 214x11 at 1.775 and got an error loading into windows. Not sure if I should raise the vcore any more. Ram is set at 2.7v. Temps are 37c idle and 43-44 load. Is this consistent with what everyone else gets with their locked 2500+?

Click to expand...

Suuure those are still quite low temps for air cooling during the summer. Raise that vcore up a little and see how much further you can push it.

Seems to be doing pretty good so far.

the chip is AQZFA 0411. I might try and see if I can hit 2.4 shortly. Thanks