Easy 4ghz?

situman · 08-17-04, 07:33 AM

Just check out the voltage ratings on this

http://processorfinder.intel.com/scr...07&CorSpd=6135

johnflyons · 08-17-04, 07:47 AM

Might be the one

be #digital · 08-17-04, 08:11 AM

new processor in 0,13µm? thought there will only come new processors in 0,09µm..

batboy · 08-17-04, 09:15 AM

I would not put too much faith in the voltages listed on the Intel site. They have been wrong several times before. In fact, my 3.2C has the same vcore listed on the website (see link), but that's not what it says on the retail box. Default vcore is 1.55v. It looks to me like they goofed and put Prescott vcores on the Northwood listings.

http://processorfinder.intel.com/scr...107&CorSpd=ALL

situman · 08-17-04, 09:37 AM

hmmm interesting...anyone know where i can get a SL6WG stepping 3.2c? they are the new FC-PPG watevers.

rayik · 08-17-04, 09:38 AM

I see it's a D1 stepping. I just got a D1 stepping 3.0C SL6WK

Default vcore is 1.475. It can boot into windows at 4012 (267 fsb) with 1.575 vcore. 100% stable at sig below.

Hopefully all D1s are that good. Good luck if you get it.

Frog_Qc · 08-19-04, 12:59 AM

As you can in my sig im at 3.7 for now with an 12 caps SL6WU Philippines. im at 1.6Vcore and i wait for my 120mm to put it in front of my cpu heatsink (sp-94) but in cpuz it say stepping 9 and revision D1 do u talk about the same D1? i hope!

but when u say that u are stable at 4G did u pass a blend test with prime95? i always test my overclock with that... for now im stable for 12h test long! hehe

For the voltage issue... the max for 'wood is 1,65 in read or setted in bios?

thx
Frog

08-17-04, 07:33 AM	Thread Starter #1
situman Member Join Date: Sep 2003	Easy 4ghz? Just check out the voltage ratings on this http://processorfinder.intel.com/scr...07&CorSpd=6135 __________________ Asus Rampage Formula X48 Intel Q9650 @ 4.33GHZ OCZ Platinum DDR2-800 Palit 4870x2 Creative Xi-Fi Extreme Music Corsair HX1000 LL 343B Case Thermochill 120.3 2xMCP355 KL 350AT KL 4870X2 FC WB DD Chipset Block
	QUOTE Thanks

08-17-04, 07:47 AM	#2
johnflyons Member Join Date: Aug 2003 Location: Indian Wells, CA	Might be the one __________________ Asus P6T6 WS Revolution, 3520 Xeon 4.2@200mhz G-Skill PID 1600 @ 6-7-4-18 1T Asus 5970 video Corsair 1200 AX
	QUOTE Thanks

08-17-04, 08:11 AM	#3
be #digital New Member Join Date: Jun 2004	new processor in 0,13µm? thought there will only come new processors in 0,09µm..
	QUOTE Thanks

08-17-04, 09:15 AM	#4
batboy Senior Moment Join Date: Jan 2001 Location: Kansas, USA	I would not put too much faith in the voltages listed on the Intel site. They have been wrong several times before. In fact, my 3.2C has the same vcore listed on the website (see link), but that's not what it says on the retail box. Default vcore is 1.55v. It looks to me like they goofed and put Prescott vcores on the Northwood listings. http://processorfinder.intel.com/scr...107&CorSpd=ALL __________________ 2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen
	QUOTE Thanks

08-17-04, 09:37 AM	Thread Starter #5
situman Member Join Date: Sep 2003	hmmm interesting...anyone know where i can get a SL6WG stepping 3.2c? they are the new FC-PPG watevers. __________________ Asus Rampage Formula X48 Intel Q9650 @ 4.33GHZ OCZ Platinum DDR2-800 Palit 4870x2 Creative Xi-Fi Extreme Music Corsair HX1000 LL 343B Case Thermochill 120.3 2xMCP355 KL 350AT KL 4870X2 FC WB DD Chipset Block
	QUOTE Thanks

Easy 4ghz?

Internet Services

Website Development

Tech Hardware

08-17-04, 09:38 AM	#6
rayik Member Join Date: May 2002	I see it's a D1 stepping. I just got a D1 stepping 3.0C SL6WK Default vcore is 1.475. It can boot into windows at 4012 (267 fsb) with 1.575 vcore. 100% stable at sig below. Hopefully all D1s are that good. Good luck if you get it. __________________ Multiple pcs and appliances networked together
	QUOTE Thanks

08-19-04, 12:59 AM	#7
Frog_Qc Member Join Date: Jul 2004	As you can in my sig im at 3.7 for now with an 12 caps SL6WU Philippines. im at 1.6Vcore and i wait for my 120mm to put it in front of my cpu heatsink (sp-94) but in cpuz it say stepping 9 and revision D1 do u talk about the same D1? i hope! but when u say that u are stable at 4G did u pass a blend test with prime95? i always test my overclock with that... for now im stable for 12h test long! hehe For the voltage issue... the max for 'wood is 1,65 in read or setted in bios? thx Frog __________________ Asus P6T Deluxe V2 Bios 504 CoreI7 920 D0 @ 3,78Ghz Apogee GTX G.Skill Trident DDR3-16000 3x2Gb @ 1800Mhz (9-9-9-24) Diamond HD4870x2 2Gb Ek full cover block WD 1Tb caviar Black 4.2ms WD 74Gb 10K WD 200Gb 7200 WD 1.5Tb Seagate 500Gb 7200.10 PSU Corsair HX1000W modular Case : Antec P182 SE Win7 x64 Build 7232
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search