Duron 1400 - how far should i go?

After the cheapo motherboard which didnt let me choose clock multiplier and only let me have 1ghz of my duron packed up yesturday, i aquired a nice asus azv8x-x for free!
anyway, besides it being generally a much better motherboard, it is quite easy to overclock.
i have choosen a 15x multiplier and 133 fsb (266 ddr i suppose..) which gave me 1.99ghz.
the cpu was running at about 50c after doing this, is it wise to proceed any further with just a bog standard coolermaster rated to 3200......

thanks for help!

Id try a lower multi and try a higher FSB and see where you get with that.

othere than that you have a very nice clock with that Duron 1.4 , im sister had one that topped at 1.55Ghz.

that 50c is that idle or load , i wouldn't let it get to far over 50

Goodluck with it , just got to find out what the best setting for your chip

ive been wondering...
ive just ordered 512mb of pc3500 kingston ("turbo") ram.
would i get better performance to lower the multiplier and raise the fsb, giving the same overall speed?

you get alor better performance if you where to lower the multi and raise the FSB and = the speed you have now

Some PC-3500 thats some speedy ram there