best clip on heatsink??

namanut · 10-01-04, 10:23 PM

I'm gonna get a DFI ultra Infinity and a friend of mine has 1. It states right in the amendum not to use a bolt on heatsink. I have only used slk900U bolt ons on my systems and dont know what may give the best results in a clip on. Any advice would help

SewerBeing · 10-01-04, 11:12 PM

http://www.ocforums.com/showthread.php?t=330289 <- please please please read the stickies, it has the best one for you in there (SLK 900A). However that motherboard has the 4 mounting holes so you should get something that takes advantage of them.

namanut · 10-02-04, 12:38 PM

well i have a friend with 1 and there are resistors i guess you would call them on the board in the way of the holes.(go figure) that get pinched if you use a bolt on, thus those studs wouldnt really be the right hieght and there is a paper that comes with the board saying not to use the holes. Ty for the info i'll read the sticky

10-01-04, 10:23 PM	Thread Starter #1
namanut Registered Join Date: May 2004	best clip on heatsink?? I'm gonna get a DFI ultra Infinity and a friend of mine has 1. It states right in the amendum not to use a bolt on heatsink. I have only used slk900U bolt ons on my systems and dont know what may give the best results in a clip on. Any advice would help
	QUOTE Thanks

10-01-04, 11:12 PM	#2
SewerBeing Grasshoppa Senior Join Date: Jan 2004 Location: The truth?? You can't handle the truth!!	http://www.ocforums.com/showthread.php?t=330289 <- please please please read the stickies, it has the best one for you in there (SLK 900A). However that motherboard has the 4 mounting holes so you should get something that takes advantage of them. __________________ "Unlike Windows, Linux tries to happily coexist with other OS's. It's not like Windows which will go out of its way to break other installs." MRD "On the second day of the seventh month, in the third year of the new milenium, Wedo looked down and saw new pow-ah join team 32, and it was good." Wedo "I switch Oses like most people change pants. :)" rogerdugans "Always be sure to flash your bios during lightning storms!" MRD Please Fold for team 32! portage > apt > source > rpm > windows update Gautam is a water buffalo
	QUOTE Thanks

10-02-04, 12:38 PM	Thread Starter #3
namanut Registered Join Date: May 2004	well i have a friend with 1 and there are resistors i guess you would call them on the board in the way of the holes.(go figure) that get pinched if you use a bolt on, thus those studs wouldnt really be the right hieght and there is a paper that comes with the board saying not to use the holes. Ty for the info i'll read the sticky
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

best clip on heatsink??

Internet Services

Website Development

Tech Hardware