Can't set VDIMM to 2.8 on Asus A8V Rev 2.0

Buckeyes1995 · 10-12-04, 09:32 AM

I'm using two 512mb DDR sticks of Crucial Ballistix PC4000 ram. I'm trying to get my system to OC but having a lot of trouble.. what I've done so far:

Set the HT bus to 2x (400Mhz)
Locked AGP at 66
Fired up Clockgen and found I could go to 2.3 HTT with no problems
Went to 2.4 and system locked up
So, started playing with memory first.. I set VDIMM to 2.8 and I can't boot into windows.

My specs are:

Asus A8V Deluxe Rev 2.0
Winchester 3500+ 90nm 939
74Gb Raptor 10k
300 Gb Maxtor 16mb
Gainward 6800 GT
1024 (2x512) Crucial Ballistix PC4000
Water cooled

Anyone that can offer me any help or advice would be greatly appreciated.

Thanks,

Jim

Super Nade · 10-13-04, 01:02 PM

WELCOME TO THE FORUMS!!!!!

I've made an A8V specific thread. Check it out and please move your post there. It would help others too.

http://www.ocforums.com/showthread.php?t=332591

PS* Could you make a note of the BIOS settings. Its easier to get help with the exact settings.

10-12-04, 09:32 AM	Thread Starter #1
Buckeyes1995 New Member Join Date: Oct 2004	Can't set VDIMM to 2.8 on Asus A8V Rev 2.0 I'm using two 512mb DDR sticks of Crucial Ballistix PC4000 ram. I'm trying to get my system to OC but having a lot of trouble.. what I've done so far: Set the HT bus to 2x (400Mhz) Locked AGP at 66 Fired up Clockgen and found I could go to 2.3 HTT with no problems Went to 2.4 and system locked up So, started playing with memory first.. I set VDIMM to 2.8 and I can't boot into windows. My specs are: Asus A8V Deluxe Rev 2.0 Winchester 3500+ 90nm 939 74Gb Raptor 10k 300 Gb Maxtor 16mb Gainward 6800 GT 1024 (2x512) Crucial Ballistix PC4000 Water cooled Anyone that can offer me any help or advice would be greatly appreciated. Thanks, Jim
	QUOTE Thanks

10-13-04, 01:02 PM	#2
Super Nade † SU(3) Moderator † Join Date: Aug 2004 Location: Indianapolis	WELCOME TO THE FORUMS!!!!! I've made an A8V specific thread. Check it out and please move your post there. It would help others too. http://www.ocforums.com/showthread.php?t=332591 PS* Could you make a note of the BIOS settings. Its easier to get help with the exact settings. __________________ Motherboard Repair Tutorial \|\| Power Supply Repair Tutorial \|\| A Closer Look at PSU Signals \|\| Understanding SMPS Technology \|\| ASUS P5K Capacitor mod \|\| Kernel Compile Guide \|\| Guide to Wiping an SSD Words of wisdom from krag: "Love & trust are 2 completely different things. Trust is earned, love on the other hand should be given without measure." My hwbot profile
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Can't set VDIMM to 2.8 on Asus A8V Rev 2.0

Internet Services

Website Development

Tech Hardware