what stepping is this 3.0C northwood?

Kelly Keyboard · 11-29-04, 12:42 AM

it says this on the heatspreader on the CPU:

Intel(M)(C) '01
Pentium(R) 4
3GHZ/512/800
SL6WK MALAY
Q429A352

.....T429A876
.....0704

*NOTE: THE full stops represent spaces

also what is the stock voltage for a 3ghz northwood

Captain Newbie · 11-29-04, 12:47 AM

SL6WK is the stepping.

And I believe that 1.55 volts is stock voltage--but don't quote me on that, I'm an Athlon man.

Kelly Keyboard · 11-29-04, 12:52 AM

so liek is it this "E0 or D0" or wahever stepping ive been reading about

what can i expect of an OC oputta this CPU (provided i have the right ram, PSU, cooling etc.)??

jpm804 · 11-29-04, 04:19 AM

Quote:

Originally Posted by Kelly Keyboard

so liek is it this "E0 or D0" or wahever stepping ive been reading about

what can i expect of an OC oputta this CPU (provided i have the right ram, PSU, cooling etc.)??

There is alot of people on this forum with that same stepping,,, you might want to do a search and see others results.

I have the same stepping..see sig for results. Post some of details of your hardware..might help some people in giving you advice

Maxvla · 11-29-04, 04:26 AM

Quote:

Originally Posted by Kelly Keyboard

so liek is it this "E0 or D0" or wahever stepping ive been reading about

what can i expect of an OC oputta this CPU (provided i have the right ram, PSU, cooling etc.)??

your 3.0c SL6WK is a D1 stepping. E0 and D0 steppings are for prescotts. you have a northwood cpu. i had a SL6WK and it did 3.75ghz with 1.65v. should be a decent chip for you.

batboy · 11-29-04, 06:46 AM

SL6WK is the s-spec code. If you look it up on the Intel website s-spec finder chart you will see it's a D1 stepping like Max said. Also, if you run CPU-Z on your system that will tell you too. Default vcore is probably 1.525v.

11-29-04, 12:42 AM	Thread Starter #1
Kelly Keyboard Registered Join Date: Nov 2004 Location: Australia	what stepping is this 3.0C northwood? it says this on the heatspreader on the CPU: Intel(M)(C) '01 Pentium(R) 4 3GHZ/512/800 SL6WK MALAY Q429A352 .....T429A876 .....0704 *NOTE: THE full stops represent spaces also what is the stock voltage for a 3ghz northwood __________________ Athlon 2500 @ 2.2GHz, Abit NF7-S, 1Gb OCZ PC3500EL :attn:, 9800 Pro @ 390/360MHz, Audigy 2 ZS, WD 200Gb SATA
	QUOTE Thanks

11-29-04, 12:47 AM	#2
Captain Newbie Senior Django-loving Member Join Date: Jan 2004 Location: Right seat with a bored "don't kill me" expression	SL6WK is the stepping. And I believe that 1.55 volts is stock voltage--but don't quote me on that, I'm an Athlon man. __________________ B.S. Computer Science, B.A. Political Science \| Commercial Pilot Airplane Single and Multiengine Land, Instrument Airplane "And, while with silent lifting mind I've trod The high untresspassed sanctity of space Put out my hand, and touched the face of God." Strong * Focused * Safe Apple Mac Pro 4,1, Two Nehalem Xeons 2.26GHzx4 (Hyperthreaded), 12 GB DDR3 FBDRAM \| MacBook Pro 15" (2009)
	QUOTE Thanks

11-29-04, 12:52 AM	Thread Starter #3
Kelly Keyboard Registered Join Date: Nov 2004 Location: Australia	so liek is it this "E0 or D0" or wahever stepping ive been reading about what can i expect of an OC oputta this CPU (provided i have the right ram, PSU, cooling etc.)?? __________________ Athlon 2500 @ 2.2GHz, Abit NF7-S, 1Gb OCZ PC3500EL :attn:, 9800 Pro @ 390/360MHz, Audigy 2 ZS, WD 200Gb SATA
	QUOTE Thanks

11-29-04, 06:46 AM	#6
batboy Senior Moment Join Date: Jan 2001 Location: Kansas, USA	SL6WK is the s-spec code. If you look it up on the Intel website s-spec finder chart you will see it's a D1 stepping like Max said. Also, if you run CPU-Z on your system that will tell you too. Default vcore is probably 1.525v. __________________ 2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen Last edited by batboy; 11-29-04 at 02:15 PM.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

what stepping is this 3.0C northwood?

Internet Services

Website Development

Tech Hardware