[felinusz]

I thought I'd share this with everyone, so that others can make this extremely easy fan attachment, for safe, solid, and reliable RAM cooling with a 60mm or 80mm fan.

I had originally fabricated a bracket to mount a 60mm fan above my RAM sticks, but it doesn't fit my new motherboard, due to differently placed RAM slots.

So, I got to brainstorming a solution. I didn't want to use the rubber band mounting method, because rubber bands are flimsy, unreliable, and as such, unsafe. I don't want a rubber band to snap, and result in the death of a bunch of my hardware. Rubber bands also press a fan right up against the RAM sticks, causing them to vibrate, which can't be good.

If you are unfamilier with what I mean by "The Rubber Band Method", read this thread (it also has pics of the bracket I originally made): http://www.ocforums.com/showthread.p...&highlight=RAM



The below picture of my creation speaks for itself, but basically, I have two 'clips' made from a coat hanger, that snap onto either side of the RAM slots. Same idea as "The Rubber Band Method" mentioned above, but sturdier, safer, and more reliable . The idea was inspired by those fan clips that Thermalright uses on their excellent heatsinks.

All it took for me to make the clips were three coat hangers (my first clip wasn't evenly shaped), a pair of needle nosed pliers, and a wire cutter. The clips and fan fit perfectly on any three-RAM-slot motherboard, and I'm sure it would be easy to make larger/smaller clips for motherboards with more or less RAM slots as well.

Comments?

[Npetune3000]

Can u posta pic w/ it in action?

[Aphex_Tom_9]

nice mod

[l3ored]

Originally Posted by Npetune3000

Can u posta pic w/ it in action?

[Reefa_Madness]

Do you slip the wires over the RAM "locking tabs" the same way as the rubber band method?

That is certainly an improvement over the rubber band mod. It is very similar and sort of uses the same idea...do we have patent infrigement issues here???

If you don't understand by "joke", check out the fires that are raging over in the Memory Section.

[felinusz]

Do you slip the wires over the RAM "locking tabs" the same way as the rubber band method?

That is certainly an improvement over the rubber band mod. It is very similar and sort of uses the same idea...do we have patent infrigement issues here???

If you don't understand by "joke", check out the fires that are raging over in the Memory Section.

Yes, the wires slip overtop of the DDR RAM Slot locking tabs. It is indeed very similar to the rubber band method, and almost as easy to make .

As for the patent, I am currently working on getting a "patent pending" status on this. This had better not show up on store shelves, unless it has my name on it .

But really, any person with a couple of coat hangers, and a pair of pliers/wire cutters can make their own .

Can u posta pic w/ it in action?

Sure thing

[felinusz]

A close-up glamour shot

[wfarid]

dude i just saw that for sale @ SVC!!!


JK... cool idea, i like

[creepy]

Good idea. Did you get a higher oc at all?

[the adam]

nice mod. man i was trying to find a way to do this myself. Thx for coming up with it for me.

[felinusz]

Good idea. Did you get a higher oc at all?

I'm not really sure if this has improved my memory overclock at all, as I only started pushing for a >250 MHz FSB, and only started using 3.6V+ of VDIMM, after installing the fan and clips.

However, the memory sticks are now cool to the touch, where they were burning hot before. The RAM fan gives me peace of mind, if no proof of an overclock gain . Because of the fan, I'm no longer at all concerned about plastering my RAM with 3.7V, let's leave it at that .

nice mod. man i was trying to find a way to do this myself. Thx for coming up with it for me.

When you bend your coathanger, be sure to measure everything with a ruler first - I found that marking the coathanger wire with a little scratch where the bends needed to be made really helped to make the whole thing easier to manufacture.

I used an old dead board that I have, to measure the width of three DDR RAM slots, and to get the bend angles and lengths right for a relatively easy, and centered mounting in the end product.

If you use an 80mm fan, you'll probably need to add an extra bend, to accomodate the wider width.

[Electron Chaser]

That is very cool original idea!!!

You need to take your idea, drawings, notes, and pics and put them in an envelope and mail them to yourself via registered mail. Then if someone else trys to steal your idea and market it. The postmark on your unopened letter will hold up in court that you had the idea first and can prove it. It is known as a "Poor man's Patent". You may not get rich on the idea but you may make a few bucks on it and keep someone else from maiking money at your expense.

[mattmolson]

ty felinusz
very nicely done.for anyone else who wants to bend some wire, lee valley tools has a nice little jig. here's a link.
http://www.leevalley.com/wood/page.a...urrency=2&SID=

[felinusz]

That is very cool original idea!!!

You need to take your idea, drawings, notes, and pics and put them in an envelope and mail them to yourself via registered mail. Then if someone else trys to steal your idea and market it. The postmark on your unopened letter will hold up in court that you had the idea first and can prove it. It is known as a "Poor man's Patent". You may not get rich on the idea but you may make a few bucks on it and keep someone else from maiking money at your expense.

Thanks, I'll mail all of that to myself right away

I just need to mail it all to myself before some company mails it to themselves first....

ty felinusz
very nicely done.

Thanks, let us know if it works out for you

[Npetune3000]

Very very nice!!

I think I'll test it out using my stock AMD fan to cool my ram.

Edison has nothing on you

[tenchi86]

Extremly nice. Great work here. Maybe next time tohugh get a patient before you post on the net.

[k3nshin]

hmm nice idea




but does it do anything noticable?

[Ad Rock]

That looks like a great idea felin, I was going to fabricate a mounting bracket as well for my mobo (proboly close to what you made) so the fan would be placed above the ram and blow vertically across it (the long way) instead of over the ram. However this solution seems to be nice and simple, so I may have to borrow it .

You wouldn't take legal action against a fellow Canadian would you .

[Npetune3000]

call invent-tech now !!

[Bogie]

Great idea, what if you dipped the ends in that rubber stuff you dip tool handles in?

[felinusz]

Bogie

Great idea, what if you dipped the ends in that rubber stuff you dip tool handles in?

Not a bad idea, that would add some grip, and some degree of vibration control.

However, the fan is *VERY* sturdy on the RAM sticks, and does not vibrate either RAM stick noticeably to the touch, which was one of my goals. With the rubber band method, I found that the sticks would vibrate a good deal, along with the fan.

I don't know if that vibration would actually do anything, but vibrating RAM sticks made me feel uneasy.

Ad Rock

That looks like a great idea felin, I was going to fabricate a mounting bracket as well for my mobo (proboly close to what you made) so the fan would be placed above the ram and blow vertically across it (the long way) instead of over the ram. However this solution seems to be nice and simple, so I may have to borrow it .

You wouldn't take legal action against a fellow Canadian would you

Give it a shot, and let us know if it works for you man

Don't worry about legal action, I could never do that to another Canuck

K3nshin

but does it do anything noticable?

My RAM sticks are cool to the touch, with 3.6V of VDIMM coursing through their silicon veins, that counts as noticeable in my books

Tell you what, I'll do some primitive testing first with the fan off, and then with the fan on, and we'll see if the fan actually does anything in terms of overclocking gains

[ghettocomp]

mail several copies of this idea to yourself, you never know what will get lost or how many are needed. The surest way to avoid any extra questions is to address and stamp on the back of the envelope, this way the post mark and stamp will eliminate questions of when the stuff was placed in the envelopes (Believe me, I have been there and done that) Poor mans copyright in this fashion works every time.

[boostdfd3s]

Perfect timing! I just bought two 80mm fans to put on my BH-5 ram and had no idea how to mount it. Felinusz you're the man!

One question though, is the fan sitting on the ram heatsinks or barely suspended above it?

[Flip-Mode]

Great idea dude, way to go.
Now thats what I call modding!

[cougar214]

that was one hell of an idea........i just did it myself and i must say it was really easy to make.although i have mine sitting about 2 inches above the ram.....that should be fine right?....im not o/cing anything....i just want my ram to run cooler when i have my system running at load.thanks for the idea felinusz...props to ya.

[felinusz]

One question though, is the fan sitting on the ram heatsinks or barely suspended above it?

Mine has the fan suspended a little ways above the RAM sticks, although not very high off of them. Vibration being one of my concerns, I didn't want the fan right on the RAM sticks.

that was one hell of an idea........i just did it myself and i must say it was really easy to make.although i have mine sitting about 2 inches above the ram.....that should be fine right?....im not o/cing anything....i just want my ram to run cooler when i have my system running at load.thanks for the idea felinusz...props to ya.

I'm glad you found the idea useful .

2 inches isn't much, you should still be getting some good airflow over your sticks.

[Pineabs]

u better paten ur invention, before i steal it from ya. nice work btw.

[Grimes]

wow, good job dude.

but, fyi, I have heard that the mailing yourself a "patent" idea never holds up in court. it's kinda an urban myth.

good job though!

[Ven0m]

Dude - that's awesome in its design and simplicity - props

[thegreek]

yeah, good job