I want to hook up my front panel's IEEE 1394 (Firewire/iLink) I/O port to the motherboard. Here is my problem: The IEEE1394 wire has six leads. The six leads are labled as: TPA+, TPA-, TPB+, TPB-, GND, +12V. The IEEE header has ten pins. The ninth pin is NC, or no contact. Now you see, six wires, nine pins, what the hell do I do? I have attached the pin configuration diagram that my mainboard support sent me, it can be found at the bottom of this post. When you look at the diagram you'll see that I have most of the necessary wires, six of them to be exact, but I am missing three. So my question for you is simply this, which pins would I hook the GND wire and the +12V wire to?
Motherboard manufacturer: Soltek
Model number: SL-865 Pro-775
Motherboard manufacturer: Soltek
Model number: SL-865 Pro-775
Attachments
Last edited:
why didnt this bud get some helpzor!
