Notices

Overclockers Forums > Hardware > CPUs > Intel CPUs
Intel CPUs
Forum Jump

4Ghz Club

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 02-09-05, 08:16 PM Thread Starter   #1
Shootingblanks
Member

 
Shootingblanks's Avatar 

Join Date: Dec 2003
Location: Northeast Ohio

10 Year Badge
 
Post 4Ghz Club


Let's see how many 4Ghz and up members we have in this forum.

Identify your Max Mhz
Identify CPU Type & Stepping
Identify your Max FSB
Identify the type of cooling used

Simply post a screenie showing that you at least made it to 4Ghz (or greater).

Max Mhz:4.165
3.2E Stepping EO
Max FSB:260
AquaXtreme 50Z-DC12-T w/77' Bonneville Heatercore/DD TDX




__________________
New Corsair 800D Build

800D H20 System

Corsair 800D|Intel Core i7 930 D0 @ 4.125GHz |EVGA X58 Classified 760 w/ EK-FB|6GB Corsair Dominator-GT-2000|EVGA GeForce GTX 480 SC w/ EK Waterblock|Intel X25-V 40GB SSD| 2 x 36.7GB WD Raptors(Raid 0)|Hitachi 160GB 7200RPM SATA 7K250 Hard Drive|SB Audigy 2 ZS|Corsair HX1000W|XSPC Dual 5.25" Bay Reservoir w/ Dual Laing DDC Pumps |XSPC 360 Rad|XSPC 240 Rad|Bitspower Compression Fittings |2 X Scythe Fan Controllers|LG 246WP|Win7 x64 Ultimate
Shootingblanks is offline   QUOTE Thanks
Old 02-09-05, 09:58 PM   #2
waddupmm
Disabled

 
waddupmm's Avatar 

Join Date: Oct 2004
Location: San Diego, CA

 
Im at 4 with my d0



Could load windows at 4.2 but not stable at ALL
waddupmm is offline   QUOTE Thanks
Old 02-09-05, 10:09 PM   #3
Sucka
Member

 
Sucka's Avatar 

Join Date: Jan 2004
Location: Denver, CO

 
Here's my max air screenshot


__________________
DFI SLI-DR | Opteron 170 | 2x512 G.Skill LE | x1900XTX | 2x250GB T7K250 RAID 0 | PCP&C 510 SLI | X-Fi | Dell 2007FPW
Laptop | Dell E1405 | Core Duo 2 Merom T7200 | 2GB DDR2 | Intel 950GM | 120GB HD | 14.1 in. WXGA+ Truelife | XP Pro

Heatware
Sucka is offline   QUOTE Thanks
Old 02-09-05, 11:31 PM   #4
xTrEmEoVrClOcKr
member



Join Date: May 2004
Location: San Diego, CA

 
Max Mhz:4.25
3.2E Stepping dO
Max FSB:263 or something
Modded Zalman 7000CU

Screenie, this is at 4.05, with benchies included:

__________________
Core i5 2500K @ 4.6GHz w/ XIGMATEK SD1283 120mm
Asus P8Z68-Z
8GB Corsair Vengeance
640GB x 2 WD Black in RAID0, 500GB Data drive
Sapphire HD5830 @ 900Mhz / 1225Mhz
Lian Li V2000A w/ 550W Antec TruePower II
xTrEmEoVrClOcKr is offline   QUOTE Thanks
Old 02-10-05, 11:23 AM   #5
JCLW
Member

 
JCLW's Avatar 

Join Date: Apr 2002
Location: Back in Toronto

10 Year Badge
 
330J

Identify your Max Mhz: Only tried 4ghz
Identify CPU Type & Stepping: Celeron-D "J" E0
Identify your Max FSB: Only tried 200mhz
Identify the type of cooling used: CoolerMaster Hyper 48 w/92mm Zalman @1250rpm


Note that CPUZ read the voltage incorrectly, see Asus Probe for correct voltage.

__________________
♫♪ ☺ ♫♪
JCLW is offline   QUOTE Thanks
Old 02-10-05, 12:41 PM   #6
batboy
Senior Moment

 
batboy's Avatar 

Join Date: Jan 2001
Location: Kansas, USA

10 Year Badge
 
Max Mhz: 4.737 gig (see screenie)
CPU Type & Stepping: LGA775 "J" E0 stepping
Max FSB: 300 FSB
type of cooling used: air cooled XP-120 with case mods

NOTES: 100% stable speed is 4.4 gig, I can benchmark at 4.5 gig except for PCmark2004, max 4.737 was merely done for screenie (was not stable at all), max stable FSB is 291 using 14X multiplier (300 FSB was not stable), max FSB at 19X was 249, but max stable is 232 FSB.


__________________
2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W
watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad
FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen
batboy is offline   QUOTE Thanks
Old 02-11-05, 01:04 AM   #7
Clevor
Member



Join Date: Aug 2001

 
Hmmm, just what is the definition of stability or criteria for 'hitting 4 gig on air'? I see some awfully high clocks on air. How about all three Marks, Aquamark, PCMark2004 Pro all tests, IL-2/SS 2nd Encounter demo for 30', SuperPI 16M? Any takers?

For myself, an 3.0E, two 3.2E, one 3.4E, and two 3.4C all hit 4 gig on a HC200. Haven't even bothered to max them out yet so not worth posting specs. Criteria for stability was the above.
Clevor is offline   QUOTE Thanks
Old 02-11-05, 05:39 AM   #8
batboy
Senior Moment

 
batboy's Avatar 

Join Date: Jan 2001
Location: Kansas, USA

10 Year Badge
 
How about just PCmark2004? From my experience, that's one of the toughest benchmarks around.

__________________
2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W
watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad
FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen
batboy is offline   QUOTE Thanks
Old 02-11-05, 05:59 AM   #9
Vio1
Member



Join Date: Mar 2003
Location: Toronto Canada

 
Max Stable OC: 4.5ghz
Prescott SL7E5 (3.2e)
Max FSB: 281
VAPOCHILL LS




__________________
Heatware
Vio1 is offline   QUOTE Thanks
Old 02-11-05, 02:44 PM   #10
tomslick
Registered



Join Date: Jul 2004
Location: Texas.USA

 
Heres mine. I can get a screen shot at 4.2 but I run at 4.0
Attached Images
  
tomslick is offline   QUOTE Thanks
Old 02-19-05, 05:12 PM   #11
Mud
Member

 
Mud's Avatar 

Join Date: Feb 2005
Location: Jordan

 
rig: in sig
pressie: LGA775 550
all info in screenie.. running stock cooler and a case i wont name thermally good.. getting some new cooling kit soon i havent tried past 4ghz yet.. temps barrier but its 100% stable!

http://www.imagehop.com/show.php?id=6e91f33a7fb14
http://www.imagehop.com/show.php?id=6e93f8bf87261

__________________
Intel Q6600
Giabyte P45-UD3P Rev 1.0
Thermalright Ultra120 Extreme + Scythe S-Flex Fan
4Gb PC8500 OCZ LV
eVGA GTX260 Core216 SC Edition
74gb WD Raptor
320gb WD Caviar 7200
Enermax Liberty 500W PSU
CM Stacker 832
Mud is offline   QUOTE Thanks
Old 02-20-05, 04:46 PM   #12
ElementOC
New Member



Join Date: Jan 2004
Location: Quebec!!!

 
Max Mhz: Stable at 4.02ghz with 2-2-2-5
CPU Type & Stepping: s478 (SL7PM) E0 stepping
Max FSB: 268 FSB
type of cooling used: XP-120 with Panaflo 120mm "High CFM"
ElementOC is offline   QUOTE Thanks
Old 02-20-05, 05:28 PM   #13
Mr.Guvernment

 
Mr.Guvernment's Avatar 

Join Date: Feb 2003
Location: Costa Rica - and toronto sometimes

10 Year Badge
 
cross my fingers!! when my WC comes will try with my 3.0C - going to take a 3.2E out of a laptop - change with a 2.6 C and see what i can do with that baby!

__________________

¸,ø¤°`°¤ø,¸© Poor Planning On Your Part Does Not Constitute An Emergency On My Part ©¸,ø¤°`°¤ø,¸
¸,ø¤°`°¤ø,¸© The trouble with life is there’s no background music ©¸,ø¤°`°¤ø,¸
¸,ø¤°`°¤ø,¸© Life isnt short, you're just dead for too long©¸,ø¤°`°¤ø,¸


Mr.Guvernment is offline Folding Profile   QUOTE Thanks
Old 02-20-05, 05:32 PM   #14
Helius
Registered



Join Date: Jan 2005
Location: Vancouver

 
P4 2.8E C0
Stock Cooling
Runnning Divider
Attached Images
 
Helius is offline   QUOTE Thanks
Old 02-20-05, 09:21 PM   #15
Mr.Guvernment

 
Mr.Guvernment's Avatar 

Join Date: Feb 2003
Location: Costa Rica - and toronto sometimes

10 Year Badge
 
Identify your Max Mhz--------------- 4030 @ 1.7v
Identify CPU Type & Stepping--------- NOrthy 3.0C umm stepping not sure
Identify your Max FSB----------------- 267 FSB
Identify the type of cooling used ------ Thermaletake A1715P4 Spark 7+ (Xaser Edition) running @ 6000RPm

Was running F@H - one client crashed but i used the system still afterwards - have not run prime 95 yet - using a single stick of pc2700 that was @ 180 @ a 3:2 ratio, anyting higher on the FSB and i got BSOD's will find out once i find some new ram.

click for larger image if needed:
http://fuzzy.phpwebhosting.com/~math...stacker/03.jpg


__________________

¸,ø¤°`°¤ø,¸© Poor Planning On Your Part Does Not Constitute An Emergency On My Part ©¸,ø¤°`°¤ø,¸
¸,ø¤°`°¤ø,¸© The trouble with life is there’s no background music ©¸,ø¤°`°¤ø,¸
¸,ø¤°`°¤ø,¸© Life isnt short, you're just dead for too long©¸,ø¤°`°¤ø,¸


Mr.Guvernment is offline Folding Profile   QUOTE Thanks
Old 02-23-05, 05:53 PM   #16
Mr.Guvernment

 
Mr.Guvernment's Avatar 

Join Date: Feb 2003
Location: Costa Rica - and toronto sometimes

10 Year Badge
 
got to be more people in the 4ghz club!

__________________

¸,ø¤°`°¤ø,¸© Poor Planning On Your Part Does Not Constitute An Emergency On My Part ©¸,ø¤°`°¤ø,¸
¸,ø¤°`°¤ø,¸© The trouble with life is there’s no background music ©¸,ø¤°`°¤ø,¸
¸,ø¤°`°¤ø,¸© Life isnt short, you're just dead for too long©¸,ø¤°`°¤ø,¸


Mr.Guvernment is offline Folding Profile   QUOTE Thanks
Old 02-23-05, 06:17 PM   #17
oRIDDLERo
Member

 
oRIDDLERo's Avatar 

Join Date: Jul 2002
Location: In a Room Heated by Electronics

 
Lol, i hate these "im in the 4ghz club" posts where people post a 1m superpi and a wcpuid screen shot then be proud. I can post a 4.2 right now on my D0 and do a super pi and screenshot… Can I be in the club? Imo if your rig cant do exactly what it could do when it was stock (Dual Prime for 12+ hours or so) then your station is either unstable, or a hazard to itself. I should start a DPS @ 4ghz for 12 hours thread (Screenie required) now that would be impressive!

On another note... Nice OC waddupmm! What MB are you running?

Quote:
Originally Posted by waddupmm
Im at 4 with my d0



Could load windows at 4.2 but not stable at ALL
oRIDDLERo is offline   QUOTE Thanks
Old 02-23-05, 07:03 PM   #18
Clevor
Member



Join Date: Aug 2001

 
Quote:
Originally Posted by oRIDDLERo
Lol, i hate these "im in the 4ghz club" posts where people post a 1m superpi and a wcpuid screen shot then be proud. I can post a 4.2 right now on my D0 and do a super pi and screenshot… Can I be in the club? Imo if your rig cant do exactly what it could do when it was stock (Dual Prime for 12+ hours or so) then your station is either unstable, or a hazard to itself. I should start a DPS @ 4ghz for 12 hours thread (Screenie required) now that would be impressive!
Totally agree. As I always say: stability is in the eyes of the beholder.

Same with ram. I think Bacchus over at Extreme did a thread of highest you can run TCCD at 2.5-3-3-7, with the criteria being SuperPI 32M. Not many guys showed up. I looked for it the other day and I think it's buried in the back, or deleted or something. What happened to those handful of guys showing screenies of 300, 2.5-3-3-7 at 1T with 2x512s ?
Clevor is offline   QUOTE Thanks
Old 02-23-05, 07:38 PM   #19
waddupmm
Disabled

 
waddupmm's Avatar 

Join Date: Oct 2004
Location: San Diego, CA

 
Quote:
Originally Posted by oRIDDLERo
Lol, i hate these "im in the 4ghz club" posts where people post a 1m superpi and a wcpuid screen shot then be proud. I can post a 4.2 right now on my D0 and do a super pi and screenshot… Can I be in the club? Imo if your rig cant do exactly what it could do when it was stock (Dual Prime for 12+ hours or so) then your station is either unstable, or a hazard to itself. I should start a DPS @ 4ghz for 12 hours thread (Screenie required) now that would be impressive!

On another note... Nice OC waddupmm! What MB are you running?
Well I was using a Abit ic7-g max II advance , but since ive started working on a new system ive taken all that stuff out now its just sitting on my counter :X
waddupmm is offline   QUOTE Thanks
Old 02-23-05, 07:46 PM   #20
oRIDDLERo
Member

 
oRIDDLERo's Avatar 

Join Date: Jul 2002
Location: In a Room Heated by Electronics

 
hehe, nice... BTW is there a difference in the IC7-g and the ic7-g Max II? It looks like on abits web site there is only a IC7-G... No max II? I sure hope there is no max2 because i just bought a ic7-g a few minutes for the 105 amp circuitry.

http://www.abit-usa.com/products/mb/
oRIDDLERo is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > CPUs > Intel CPUs
Intel CPUs
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 11:34 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?