Coolermaster Stacker 2

Ponche · 03-12-05, 09:06 PM

Check it out. It is great!

CM Stacker RC-830
3dgameman info

Cerberus2k7 · 03-12-05, 09:07 PM

Woah...that looks sick!

Sentential · 03-12-05, 09:11 PM

Hmmmmm I dunno. It looks like something out of a hospital

deception`` · 03-12-05, 09:25 PM

Interesting design, but it looks a bit too "busy" for my tastes. Looks like the PC-65B Plus is the right case for me next time.

deception``

Prodigious · 03-12-05, 09:26 PM

so this is technically a btx case correct? About damn time.

man_utd · 03-12-05, 09:39 PM

For all those btx boards :S
Wonder if they could fit some more fans?

Cerberus2k7 · 03-12-05, 10:03 PM

I don't think the case looks too busy at all. Its more balanced than anything to me. I loved the first stacker and this one is really nice. I think im gonna use this for my Xeon build.

FarzBar · 03-12-05, 10:14 PM

p180, stacker2,(considers dropping legos plan).............

zip22 · 03-13-05, 12:08 AM

i like it better than the original as well, but i dont like it as much as i like the p180. maybe if i see some hi res shots, but something about the p180 just strikes me as elegant, this one does not (or does not as much). its in a close second, though. at least it has its own product page (more than i can say for the p180)

JTanczos · 03-13-05, 01:18 AM

IT LOOKS LIKE CRAP!!!!

I only say that cause I shelled out the money for the first one already. lol I like the look of the stacker. My only beef with it is the side panel fan mounts and the difficulty of removing/cleaning the front bezels.

The new ones looks great though. BTW the stacker was BTX as well. I wonder if I can get a replacement side panel with the one from this thing. Looks a hell of a lot more efficient.

JT

cetoole · 03-13-05, 02:36 AM

I like it, but where do I put my rad?

Finken · 03-13-05, 05:59 AM

I think it looks pretty good... but I don't really see the benifits from this one over the original stacker?

ONE · 03-13-05, 07:22 AM

The front bezel or door does make it look like something in a hospital....probably priced over $200.

Ad Rock · 03-13-05, 07:37 AM

I dont care for the looks of it at all. There is still not a single company out there that makes a finer case than Lian-Li in my eyes.

squasher · 03-13-05, 07:50 AM

I really dissapointed, when I first saw it, my first thought was that it looked like that flashy TT case that were so ugly. I'm sure that it will preform well, but that bulge is not to my liking. I think that a really nice case would be that in perfect black with no bump.

zip22 · 03-13-05, 10:14 AM

the bump is replaceable (maybe different styles?), and i think it might be mesh?

Quote:

Innovative Style
-With 2mm thickness aluminum alloy makes it durable and study
-Changeable front door
-Stand out design, perfect from every point of view

Quote:

-Front: Full mesh screen provides superior air flow; support up to three 12 cm fans

Vio1 · 03-13-05, 10:16 AM

pretty nice looking case. Wish there were better pics of it though

Finken · 03-13-05, 11:00 AM

Yeah when it comes to pure style Lian-Li is king IMO
However I like the functionality of the Stacker, and that's more important to me then looks. It's what's on the inside that counts

Mr.Guvernment · 03-13-05, 11:14 AM

i would buy it - i got a first stacker

as for the BTX comment - the first stacker had BTX support.

Mr.Guvernment · 03-13-05, 11:17 AM

Quote:

Originally Posted by Finken

I think it looks pretty good... but I don't really see the benifits from this one over the original stacker?

4 side fans - new design, that is all -still the coolermaster quality. they kept the oriinal 3 x 120mm front design moe or less and just reshaped it.

03-12-05, 09:06 PM	Thread Starter #1
Ponche Registered Join Date: Jan 2005	Coolermaster Stacker 2 Check it out. It is great! CM Stacker RC-830 3dgameman info
	QUOTE Thanks

03-12-05, 09:07 PM	#2
Cerberus2k7 Drifto Mexicano Join Date: Feb 2004 Location: Denver, CO	Woah...that looks sick! __________________ Member of OCdriftingNinjas \| You gotta' Fold if you wanna turn up the Heat Overclocking: My Anti-Drug. \| Overclocking my body...one day at a time... \| Black Belt Ubercloxx0r \| You are the most ripped yo-yo'er I have ever seen. - Seven HTPC \| i5 2500k@3.8 \| Gigabyte Z68X-UD3H-B3 \| 16GB HyperX \| GTX 460 1gb@845/1100 \| 1.5TB \| Silverstone LC10S-M \| Corsair 500w
	QUOTE Thanks

03-12-05, 09:11 PM	#3
Sentential Contributing Member Join Date: Sep 2003 Location: Jacksonville, FL	Hmmmmm I dunno. It looks like something out of a hospital __________________ Coolermaster 690II Advanced \| Corsair 1000W Creative X-FI Titanium Fatal1ty Pro Intel i5 2500K (4.5ghz @ 1.33v)Corsair H100 PNY GTX 470 SLI SLi Asus P8Z68-V Pro Intel 320 SSD SATAII 2 X 120GB Raid 0 Kingston HyperX (4x4096MB)(8-8-9-28 @ 1600mhz @ 1.5v) Heatware: 13-0-0
	QUOTE Thanks

03-12-05, 09:25 PM	#4
deception`` Member Join Date: Jan 2004 Location: Atlanta	Interesting design, but it looks a bit too "busy" for my tastes. Looks like the PC-65B Plus is the right case for me next time. deception``
	QUOTE Thanks

03-12-05, 09:26 PM	#5
Prodigious Member Join Date: Dec 2004 Location: Aurora, Co	so this is technically a btx case correct? About damn time.
	QUOTE Thanks

Coolermaster Stacker 2

Internet Services

Website Development

Tech Hardware

03-12-05, 09:39 PM	#6
man_utd Member Join Date: Jun 2003 Location: Amsterdam, NL	For all those btx boards :S Wonder if they could fit some more fans?
	QUOTE Thanks

03-12-05, 10:03 PM	#7
Cerberus2k7 Drifto Mexicano Join Date: Feb 2004 Location: Denver, CO	I don't think the case looks too busy at all. Its more balanced than anything to me. I loved the first stacker and this one is really nice. I think im gonna use this for my Xeon build. __________________ Member of OCdriftingNinjas \| You gotta' Fold if you wanna turn up the Heat Overclocking: My Anti-Drug. \| Overclocking my body...one day at a time... \| Black Belt Ubercloxx0r \| You are the most ripped yo-yo'er I have ever seen. - Seven HTPC \| i5 2500k@3.8 \| Gigabyte Z68X-UD3H-B3 \| 16GB HyperX \| GTX 460 1gb@845/1100 \| 1.5TB \| Silverstone LC10S-M \| Corsair 500w
	QUOTE Thanks

03-12-05, 10:14 PM	#8
FarzBar Registered Join Date: Feb 2005	p180, stacker2,(considers dropping legos plan).............
	QUOTE Thanks

03-13-05, 12:08 AM	#9
zip22 Member Join Date: Nov 2003	i like it better than the original as well, but i dont like it as much as i like the p180. maybe if i see some hi res shots, but something about the p180 just strikes me as elegant, this one does not (or does not as much). its in a close second, though. at least it has its own product page (more than i can say for the p180)
	QUOTE Thanks

03-13-05, 01:18 AM	#10
JTanczos Member Join Date: May 2004 Location: Eastern Pennsylvania	IT LOOKS LIKE CRAP!!!! I only say that cause I shelled out the money for the first one already. lol I like the look of the stacker. My only beef with it is the side panel fan mounts and the difficulty of removing/cleaning the front bezels. The new ones looks great though. BTW the stacker was BTX as well. I wonder if I can get a replacement side panel with the one from this thing. Looks a hell of a lot more efficient. JT __________________ Spare computer, Epox Something with 700mhz Duron. 256meg of PC100 ram. 8mg ATI Rage card(hey the computer was free) :p Asus A7N8X-E Deluxe 2600+ Mobile 1 Gig PC3500 Mushkin LVL2. RBX, Maze 4 NB and GPU, AquaXtreme 50Z-DC12-T. Bonniville 302 HC, Weapon's 302 Shroud, w/ 2x 120mm Sanyo Denki. Asus A7V133 T-Bird @1100 Stock. 512 Mb PC133, Geforce 2 GTS 64 Meg. My heatware
	QUOTE Thanks

03-13-05, 02:36 AM	#11
cetoole Member Join Date: Sep 2004 Location: Maryland	I like it, but where do I put my rad?
	QUOTE Thanks

03-13-05, 05:59 AM	#12
Finken Member Join Date: Sep 2002 Location: Sweden	I think it looks pretty good... but I don't really see the benifits from this one over the original stacker?
	QUOTE Thanks

03-13-05, 07:22 AM	#13
ONE Member Join Date: Apr 2003 Location: VIRGINIA	The front bezel or door does make it look like something in a hospital....probably priced over $200.
	QUOTE Thanks

03-13-05, 07:37 AM	#14
Ad Rock Join Date: Jul 2003 Location: Montréal, PQ, Canada.	I dont care for the looks of it at all. There is still not a single company out there that makes a finer case than Lian-Li in my eyes. __________________ "Because of you my lady named fame, people spot me like nerves spot pain." Heatware:
	QUOTE Thanks

03-13-05, 07:50 AM	#15
squasher Member Join Date: Jan 2005 Location: New york, new york	I really dissapointed, when I first saw it, my first thought was that it looked like that flashy TT case that were so ugly. I'm sure that it will preform well, but that bulge is not to my liking. I think that a really nice case would be that in perfect black with no bump.
	QUOTE Thanks

03-13-05, 10:16 AM	#17
Vio1 Member Join Date: Mar 2003 Location: Toronto Canada	pretty nice looking case. Wish there were better pics of it though __________________ Heatware
	QUOTE Thanks

03-13-05, 11:00 AM	#18
Finken Member Join Date: Sep 2002 Location: Sweden	Yeah when it comes to pure style Lian-Li is king IMO However I like the functionality of the Stacker, and that's more important to me then looks. It's what's on the inside that counts
	QUOTE Thanks

03-13-05, 11:14 AM	#19
Mr.Guvernment Join Date: Feb 2003 Location: Costa Rica - and toronto sometimes	i would buy it - i got a first stacker as for the BTX comment - the first stacker had BTX support. __________________ ¸,ø¤°`°¤ø,¸© Poor Planning On Your Part Does Not Constitute An Emergency On My Part ©¸,ø¤°`°¤ø,¸ ¸,ø¤°`°¤ø,¸© The trouble with life is there’s no background music ©¸,ø¤°`°¤ø,¸ ¸,ø¤°`°¤ø,¸© Life isnt short, you're just dead for too long©¸,ø¤°`°¤ø,¸ ADD YOUR STEAM ID TO THE LIST FOR HOURS OF FUN!
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search