Notices

Overclockers Forums > Hardware > Cooling > Water Cooling
Water Cooling Discussion devoted to blocks, pumps, radiators, reservoirs, tubing, and everything else to get you running smooth on a water loop
Forum Jump

My Water Cooling *Pics* -3c Delta ZOMG!!!

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 03-15-05, 05:33 PM Thread Starter   #1
mista ting
Member

 
mista ting's Avatar 

Join Date: Oct 2004
Location: New York City

 
Talking My Water Cooling *Pics* -3c Delta ZOMG!!!


Exos (modded) + Koolance WaterBlock
A64 s754 3200+ @2.5Ghz (28c idle/35c load)
9800Pro---->XT 414/372 (30c idle/40c load)





The Exos and all the mods i did cooled the cpu so well the temps went below system temp (-3c Delta) as u can see in the 3dmark pic, the whole system is DEAD silent only thing i can hear is a few bubbles popping in the exos !!!
Attached Images
 

__________________

Q6600 G0 @ 3.4GHz @ 1.356v
Asus P45 P5Q-Pro 1406 BIOS
G-SKILL 4GB DDR2 @ 5-5-5-15 @ 756MHz
HIS HD 4850 512MB @ 700MHz / 1200MHz
1.28TB (2 x WD AALS 640GB) Hard Drives
Corsair CMPSU-520HX 520W
Antec 300 Black ATX Case

Last edited by mista ting; 03-15-05 at 06:04 PM.
mista ting is offline   QUOTE Thanks
Old 03-15-05, 05:43 PM   #2
massraptor
Member

 
massraptor's Avatar 

Join Date: Dec 2004
Location: OC ,Kalifornia

 
Talking Nice Very NICE


Congrats nice setup.Lookin good.

MassRaptor

__________________
Heatware
I7 920 @ 3.3
ASUS R2E
6 Gig Corsair
GTX 580 Refrence
2x 74 gig 15k SCSI Raid 0
OCZ GOLD 850
FOLDING FOR TEAM 32
massraptor is offline   QUOTE Thanks
Old 03-15-05, 06:20 PM   #3
ZachM
Member

 
ZachM's Avatar 

Join Date: Oct 2003
Location: Middle of Cow Country (Central Ok)

 
Well the delta of a system is measured from the air going into the rad. In your case it is not the case air, so your case temp sensors aren't the proper ones to use. You would need to measure the room temp which is probably cooler than your case temp therefore bringing the delta up. By the way, a negative delta is impossible without some sort of chiller or evaporative cooler. So your delta is probably much higher than 0, none the less a negative number.

__________________
Heatware
ZachM is offline   QUOTE Thanks
Old 03-15-05, 06:24 PM   #4
LaTeRaLuS
Registered



Join Date: Feb 2005

 
Nice, i have that system too, i have yet to do a 3dmark thingy, maybe i will just to see what i get, lol. Also, how did you MOD the Exos? Just from the picts i can see you've put in different fans, is that all?

Last edited by LaTeRaLuS; 03-15-05 at 06:29 PM.
LaTeRaLuS is offline   QUOTE Thanks
Old 03-15-05, 06:34 PM   #5
EWBatOVAclockin
Member

 
EWBatOVAclockin's Avatar 

Join Date: Jan 2005
Location: Houston, Texas

 
Hey man awesome system. Where did you download that smartguardian utility from??? Thanks man

PEACE

__________________
Project: "Last me long time"
[CPU]2.53(Celly D)@3.815[]1.385Vcore[]
[MOBO]P5WD2-Premium
[RAM]Geil 2x512 DDR2-667@334.5 MHZ[]{3-4-2-4}@2.0V
[VIDEO]Rosewill 6600gt@570/1.05-Mhz
[PSU]Fortron AX-500 Blue Storm
[CASE]AMS gMONO{Black}
[COOLING-PT.1]Zalman 7000cu w/ Delta[]{Lapped}
[COOLING-PT.2]7 Reg. Case fans[]Custom Fan Mount's
[TEMPURATURE]Ambient-34[]Idle-37[]Load-42.5

[Heatage]
EWBatOVAclockin is offline   QUOTE Thanks
Old 03-15-05, 07:05 PM   #6
Jas
Member

 
Jas's Avatar 

Join Date: Feb 2005
Location: Kenosha, WI.

 
Looks sharp!

__________________
My Rig: <-- LINKY
TT Armor Case ::: E6400-L2 Conroe Currently @ 3.6Ghz ::: MSI P6N SLI ::: 2 X 2gb G.Skill PI Black DDR2 6400
EVGA 8800GT @761/1950/1003 1.1v ::: OCZ GameXStream 700 watt PSU
Cooling: Swiftech Apogee GT (CPU) and Danger Den Maze 4 (GPU), MCW30 (NB), D4 (Pump), Dual Rads (BIX, '77 Bonny Core)
Vista Home Premium 64Bit
Oni is a bot!
Jas is offline   QUOTE Thanks
Old 03-15-05, 07:36 PM   #7
stang8118
Member

 
stang8118's Avatar 

Join Date: May 2004
Location: Philly, PA

 
Quote:
Originally Posted by EWBatOVAclockin
Hey man awesome system. Where did you download that smartguardian utility from??? Thanks man

PEACE

It comes with the DFI mobos. Don't think it'll work with your MSI mobo.

__________________
Intel i3 - Asus P8Z77V-LK - Crucial 2x4gb
Corsair 750w Modular - Antec 300 - ATI HD7850OC

Retired 3dmark Captain
Heatware 110-0-0
stang8118 is offline   QUOTE Thanks
Old 03-15-05, 09:43 PM   #8
itchy5
Member

 
itchy5's Avatar 

Join Date: Mar 2005
Location: Plano, Texas

 
very nice setup :P not a fan of 1/4'' ID tubing but i <3 the block
itchy5 is offline   QUOTE Thanks
Old 03-15-05, 10:08 PM Thread Starter   #9
mista ting
Member

 
mista ting's Avatar 

Join Date: Oct 2004
Location: New York City

 
Quote:
Originally Posted by ZachM
Well the delta of a system is measured from the air going into the rad. In your case it is not the case air, so your case temp sensors aren't the proper ones to use. You would need to measure the room temp which is probably cooler than your case temp therefore bringing the delta up. By the way, a negative delta is impossible without some sort of chiller or evaporative cooler. So your delta is probably much higher than 0, none the less a negative number.
i thought it was the cpu temp subtract the system temp whoops lo..

Quote:
Originally Posted by LaTeRaLuS
how did you MOD the Exos? Just from the picts i can see you've put in different fans, is that all?
managed to stuff 2*120mm low profile fans inside, change the led display from original red to blue, shorten the internal tubeing for better flow !


i forgot i had these Tt duct mods around 2c decrease in temps with them manageing hot air ^_^

__________________

Q6600 G0 @ 3.4GHz @ 1.356v
Asus P45 P5Q-Pro 1406 BIOS
G-SKILL 4GB DDR2 @ 5-5-5-15 @ 756MHz
HIS HD 4850 512MB @ 700MHz / 1200MHz
1.28TB (2 x WD AALS 640GB) Hard Drives
Corsair CMPSU-520HX 520W
Antec 300 Black ATX Case

Last edited by mista ting; 03-15-05 at 10:16 PM.
mista ting is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling > Water Cooling
Water Cooling Discussion devoted to blocks, pumps, radiators, reservoirs, tubing, and everything else to get you running smooth on a water loop
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 09:40 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?