[freeagent]

i was just curious, i got got sick of seeing my numbers with big volts and big heat being made, i wanted to see how fast i could run this with stock cpu volts, my poor pc2700 is working pretty hard right now, nominal for that is 2.65v, im giveing the stix 2.9, i wanna do the volt mod, but i dont want to kill my warranty.. ok so heres the stats, my cpu stock is 2083mhz with 1.65v and 333fsb, or 166, whichever you prefer

[Sjaak]

The 1800+ in sig will do about 1.8Ghz on stock volts..after that it really needs a big bump

[Hamm3r]

2.2Ghz (11x200) with my barton 2500+, so overvolting gave me extra 100Mhz.

[||Console||]

hmmm never used stock vcore on my socket a chip as i bought it to overclock first boot ever was a oc , but it would do 2.2ghz with 1.5v prob higher but for the clocks i was looking for i needed big voltage , 2v

[rseven]

My Xp2500 will go to 11x195 at the stock voltage setting. However my A7N8X deluxe mobo tends to overvolt even at stock settings, so this may not be a fair statement of what the xp can do at stock.

[Quattro]

What temp monitoring prog is that?

[sean4231]

my xp2500 barton will do 11x188 at stock voltages

[CanadianTSi]

My locked 2800 will do close to 2400mhz on stock volts.

PS change your Tras to 11.

[jonspd]

My 2100 will do around 2.25 on stock vcore.

[electrorcamd]

My Duron 1600 could do about 2GHz on a stock vcore of 1.5V (it no longer works). Now my Sempron 2200+ I think can get to about 2050MHz on a stock vcore of 1.6V. It can do 1.8GHz at 1.45V, and 2GHz somewhat stable on 1.5V.

[Kaiga]

mine doesn't seem to go very far. (in my sig.) It would only get to about 2.446GHz @ stock. (1.5)

[CanadianTSi]

well I actually just tried it out and it will do 2475 with stock volts

[jchsatx09]

My 2400+ (Not mobile) is @ 2250mhz @ stock 1.65v

[EvilCloudStrife]

not far at all.. i think maybe 100mhz past.. even that is pushing it

64 3200+

[amdperson]

Well my Sempron 2200+ does 2000Mhz at 1.47volts stable. I have taken it to 2.1 Ghz at 1.6v but its not stable. My generic 300W PSU cant handle the load and My one stick of generic ram is also limiting me. I recon I could get it to 2.1@1.6v stable once I get a better PSU and ram.

[trance]

my a64 3200 winnie will hit 2.6ghz on stock voltages of 1.36, i put it at 1.4 to make sure its stable tho, no dif in temps between the 1.36 and 1.4 anyways, but ya, 260x10 @ 1.36v

[mista ting]

s754 A64 3200+ New Castle
Steppings ADA3200AEP4AX CBAEC 0434 TPMW
(bought from newegg)

did 2.5ghz on stock woooopie

[freeagent]

Originally Posted by Quattro

What temp monitoring prog is that?

its called Hardware.Sensors.Monitor.Pro-v4.1.4.4r, its pretty good, i dont use mbm or speed fan, ive always liked this better, pm me and we can work on getting this to you, its shareware, but its fixed..

[Quentin]

Originally Posted by rseven

My Xp2500 will go to 11x195 at the stock voltage setting. However my A7N8X deluxe mobo tends to overvolt even at stock settings, so this may not be a fair statement of what the xp can do at stock.

Hmmm. I never thought of that! And quick math shows that just a 5% overvolt takes 1.65v to over 1.73. Better get a DVM and check my A7N8X voltages, too. I've always thought my CPU temps are a little high for stock voltage.

I've trusted the ASUS Probe and BIOS voltages but guess I should find a reference point near the CPU to measure.

[rseven]

Originally Posted by Quentin

Hmmm. I never thought of that! And quick math shows that just a 5% overvolt takes 1.65v to over 1.73. Better get a DVM and check my A7N8X voltages, too. I've always thought my CPU temps are a little high for stock voltage.

I've trusted the ASUS Probe and BIOS voltages but guess I should find a reference point near the CPU to measure.

My readings are not metered. I'm getting them from the bios and MBM. When I set it at 1.65 they read 1.72. It's always been this way on this board regardless of bios version or PSU.