Frosty Pics

Overbrazil · 07-26-05, 08:27 AM

home made chiller.

blt111 · 08-05-05, 01:23 PM

i'll pay someone $10 to lick there coldplate while they're on and have a pic of it

{PMS}fishy · 08-05-05, 02:51 PM

No thanks, I already stuck my finger to it.

maxxoverclocker · 08-05-05, 03:04 PM

lmao

LabRat23 · 08-10-05, 10:58 PM

I licked my finger an froze it on, does that count?

xTrEmEoVrClOcKr · 08-27-05, 04:26 PM

My frosty pics with my ghetto phase change, Maxxoverclocker and I did this with "Dr. Air"

koontz946 · 09-06-05, 06:36 PM

drew that with a screwdriver on my 1st boot up

nickyj249 · 09-08-05, 03:03 AM

i kind of new with extreme cooling how do you keep condensation form frying the processors

TazExtreme3 · 09-08-05, 05:04 AM

Quote:

Originally Posted by nickyj249

i kind of new with extreme cooling how do you keep condensation form frying the processors

Insulate, insulate, insulate.

stockhatch · 09-08-05, 08:35 PM

Cascade, stage I.

nickyj249 · 09-10-05, 03:32 PM

i've heard you should use some kind of sponge pad on the cooling block is that true, and what do you guys use

El<(')>Maxi · 09-24-05, 05:11 AM

These arn't mine but they're so cool I had to post em. These are Dani's posted over @ XS.

http://www.xtremesystems.org/forums/...23#post1054123

masakabassist · 10-10-05, 05:37 AM

Phasechange cooling does look the buisiness, but how much would it cost to set up and more to the point what are the overclocks like compared to normal cooling or water cooling?

matttheniceguy · 11-05-05, 04:15 AM

dripping water on the block is fun too... it freezes really fast, and then cracks appart as it goes down to the evap temperature. Here is some frosty water on my evap.

xTrEmEoVrClOcKr · 11-08-05, 11:11 PM

Very weak frosty pic, only had it running for like 4 min.

Ive had close to a half inch of frost on there before, never took a pic.

Myhre · 11-14-05, 08:02 AM

A couple of my favorites.

pik4chu · 11-22-05, 06:05 PM

Quote:

Originally Posted by blackhawk397

I have a 55 mm peltier and am trying to cool soda, but the hot peltier side gets too hot! How do I fix this. I already tried using an old comp. fan, but it didn't work. HELP!!!

For starters you could try using less voltage. dont need 72 full Watts to cool a can of soda

kayl · 11-25-05, 07:39 AM

my maze 4 uninsulated benching.
Electrical tape as insulaiton on test run

kayl · 11-25-05, 07:43 AM

this is what -105c looks like

Gautam · 11-26-05, 08:35 PM

Totally hardcore kayl.

How in the heck do you manage to run uninsulated?

07-26-05, 08:27 AM	#81
Overbrazil Member Join Date: Mar 2002 Location: Rio de Janeiro - Brazil	home made chiller. Attached Images __________________ Q9550 @ 4.1 Asus P5Q Deluxe 4 GB Gskill PC1100 DDR2 ATI Saphire 4870 1Gb Toxic 2x Raptors Raid 0 Pc power cooling silencer 750w second phase in progress
	QUOTE Thanks

08-05-05, 01:23 PM	#82
blt111 Mastering in Physics Join Date: May 2004 Location: London	i'll pay someone $10 to lick there coldplate while they're on and have a pic of it
	QUOTE Thanks

08-05-05, 02:51 PM	#83
{PMS}fishy Senior A64 Killer Join Date: Dec 2001 Location: Boston, MA	No thanks, I already stuck my finger to it. __________________ Pick 2: Speed -- Reliability -- Cost Trouble Shooting 101: 1. RTFM 2. Repeat Step 1 6ghz Club Member. cw823 Fan Club Founding Member, are you?
	QUOTE Thanks

08-05-05, 03:04 PM	#84
maxxoverclocker Member Join Date: Jul 2004 Location: Valley Center, CA	lmao __________________ Intel Core 2 Quad Q9550 @ 3.6Ghz @ 1.32v - Asus Rampage Formula - 4x2048MB G.SKILL DDR2 1066 @ 1060Mhz 2.2v 5-5-5-15 - ATI Radeon 5850 - 2x1.5TB Seagate RAID0 / 2x30GB OCZ Vertex Turbo RAID0 - 650Watt Corsair CMPSU-650TX
	QUOTE Thanks

08-10-05, 10:58 PM	#85
LabRat23 Member Join Date: Jun 2004 Location: VA	I licked my finger an froze it on, does that count?
	QUOTE Thanks

Frosty Pics

Internet Services

Website Development

Tech Hardware

08-27-05, 04:26 PM	#86
xTrEmEoVrClOcKr member Join Date: May 2004 Location: San Diego, CA	My frosty pics with my ghetto phase change, Maxxoverclocker and I did this with "Dr. Air" __________________ Core i5 2500K @ 4.6GHz w/ XIGMATEK SD1283 120mm Asus P8Z68-Z 8GB Corsair Vengeance 640GB x 2 WD Black in RAID0, 500GB Data drive Sapphire HD5830 @ 900Mhz / 1225Mhz Lian Li V2000A w/ 550W Antec TruePower II
	QUOTE Thanks

09-06-05, 06:36 PM	#87
koontz946 Member Join Date: Jun 2003 Location: ridgewood, NJ	drew that with a screwdriver on my 1st boot up __________________ Core2Duo E6600 \| 2*2048 Patriot PC2-6400 -=/Salute 3200+ Venice=- Asus P5W DH Deluxe EVGA GTX260 (216) Dell 2407WFP 2x 7200.10 320GB Seagate SATA II Perp. in RAID-0 \| 2x120GB WD SATAII 8mb in RAID-0 \| 640GB SATA II storage drive \| Philips SPD2413P Corsair HX520W PSU \| Antec Super LanBoy Case Scythe Infinity w/ 2x FM121s Aiwa 5.1 Surround Sound heat
	QUOTE Thanks

09-08-05, 03:03 AM	#88
nickyj249 New Member Join Date: Sep 2005 Location: Tampa, FL	condensation i kind of new with extreme cooling how do you keep condensation form frying the processors
	QUOTE Thanks

09-08-05, 08:35 PM	#90
stockhatch Member Join Date: Mar 2004 Location: Southeastern NC	Cascade, stage I. __________________ E6600(8x400) - Infinity 2x250 Perps RAID 0 P5W DH Deluxe 2GB GSkill HK 8800GTX 620HX HEAT
	QUOTE Thanks

09-10-05, 03:32 PM	#91
nickyj249 New Member Join Date: Sep 2005 Location: Tampa, FL	i've heard you should use some kind of sponge pad on the cooling block is that true, and what do you guys use
	QUOTE Thanks

09-24-05, 05:11 AM	#92
El<(')>Maxi Blank Senior Member Join Date: May 2003 Location: Seattle	These arn't mine but they're so cool I had to post em. These are Dani's posted over @ XS. http://www.xtremesystems.org/forums/...23#post1054123 __________________ rdrash - 'I'm gonna intentionally try to kill this CPU with more volts'
	QUOTE Thanks

10-10-05, 05:37 AM	#93
masakabassist Member Join Date: Aug 2005 Location: Wales!!	Phasechange cooling does look the buisiness, but how much would it cost to set up and more to the point what are the overclocks like compared to normal cooling or water cooling? __________________ Dual Booting Ubuntu and XP Asus M2N32 WS Pro :drool: AMD X2 4200 (OC'd 2856MHz @ 1.4V) 2GB Corsair PC5300 RAM (4X512MB) XFX 8800GTS 320Mb FSP 500W Bluestorm II PSU 160GB WD SATAII Hard Drive F@H masakabassist Heat: masakabassist
	QUOTE Thanks

11-05-05, 04:15 AM	#94
matttheniceguy Member Join Date: Apr 2004 Location: Vancouver Canada	dripping water on the block is fun too... it freezes really fast, and then cracks appart as it goes down to the evap temperature. Here is some frosty water on my evap. Attached Images
	QUOTE Thanks

11-08-05, 11:11 PM	#95
xTrEmEoVrClOcKr member Join Date: May 2004 Location: San Diego, CA	Very weak frosty pic, only had it running for like 4 min. Ive had close to a half inch of frost on there before, never took a pic. __________________ Core i5 2500K @ 4.6GHz w/ XIGMATEK SD1283 120mm Asus P8Z68-Z 8GB Corsair Vengeance 640GB x 2 WD Black in RAID0, 500GB Data drive Sapphire HD5830 @ 900Mhz / 1225Mhz Lian Li V2000A w/ 550W Antec TruePower II
	QUOTE Thanks

11-14-05, 08:02 AM	#96
Myhre Member Join Date: May 2004 Location: Little Rock, AR	A couple of my favorites.
	QUOTE Thanks

11-25-05, 07:39 AM	#98
kayl Member Join Date: Nov 2003 Location: australia	my maze 4 uninsulated benching. Electrical tape as insulaiton on test run Attached Images
	QUOTE Thanks

11-25-05, 07:43 AM	#99
kayl Member Join Date: Nov 2003 Location: australia	this is what -105c looks like Attached Images
	QUOTE Thanks

11-26-05, 08:35 PM	#100
Gautam Senior Benchmark Addict Join Date: Feb 2003 Location: Hillsboro, OR	Totally hardcore kayl. How in the heck do you manage to run uninsulated? __________________ El<(')>Maxi: I still have your board...and I'm afraid I lost your address so I can't send it back...and my pm box is broken...and I can't remember where the PO is anyway
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search