- Joined
- Aug 11, 2001
- Location
- "The Southland" California
Yahoo got my system up and running last night. Ok heres what I added
Epox 8k7a+ (replaced fic az11)
256mb pc2100 crucial (replaced 256mb pny pc133)
120mm and 92mm deltas
volcano 6cu+ hsf (replaced stock hsf)
artic silver II (replaced thermal pad)
I was running at 10x102=1020mhz at unknow temp(around 50c+)
Now 8.5x141=1198mhz at 37idle, 43 load @1.91v(so far, haven't got any good burn-in programs)
Learned my stepping for the first time AHFA 9 week 29 of 2000
Not very good stepping as I had to raise the volts to 1.91(my mobo defualt runs at 1.81v)
I got some nice case mods for my new fans, I'll post pics later.
According to my compunurse my case temp is 28.6c, but mbm says board temp is 24c. Room is around 23-26c
My biggest problem is the noise, I'm going to get some retrostats(don't know how to spell em) for my 130cfm fan at least.
All on a 250w sparkle psu, my +5 is 4.86, and +3.3 is 3.39
next i will get new video card and new psu, and eventually athlon xp, by the way the extra case cooling droped my video card temp around 20c! Don't know how far it will oc yet.
Now I need to know what memory timings I should set for 141fsb for 2100 crucial ram (currently at defualt with cas2)
By the way it's my birthday(17), thats how got most of this.
Epox 8k7a+ (replaced fic az11)
256mb pc2100 crucial (replaced 256mb pny pc133)
120mm and 92mm deltas
volcano 6cu+ hsf (replaced stock hsf)
artic silver II (replaced thermal pad)
I was running at 10x102=1020mhz at unknow temp(around 50c+)
Now 8.5x141=1198mhz at 37idle, 43 load @1.91v(so far, haven't got any good burn-in programs)
Learned my stepping for the first time AHFA 9 week 29 of 2000
Not very good stepping as I had to raise the volts to 1.91(my mobo defualt runs at 1.81v)
I got some nice case mods for my new fans, I'll post pics later.
According to my compunurse my case temp is 28.6c, but mbm says board temp is 24c. Room is around 23-26c
My biggest problem is the noise, I'm going to get some retrostats(don't know how to spell em) for my 130cfm fan at least.
All on a 250w sparkle psu, my +5 is 4.86, and +3.3 is 3.39
next i will get new video card and new psu, and eventually athlon xp, by the way the extra case cooling droped my video card temp around 20c! Don't know how far it will oc yet.
Now I need to know what memory timings I should set for 141fsb for 2100 crucial ram (currently at defualt with cas2)
By the way it's my birthday(17), thats how got most of this.