My Everest Screenie Question

I've set my card to overclock at 300/427 however, my EVEREST is telling me that I'm clocked at 300/216. Am I reading this wrong or is there something wrong here? Can anyone give me any advise on how to fix the issue? My EVEREST screenie is here. If it's easier, the text report is below. The portion I'm concerned with is on the very last line:

--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]------------------------------------------------------------

Version EVEREST v2.20.405
Homepage http://www.lavalys.com/
Report Type Quick Report
Computer DESKTOP (Desktop CPU)
Generator Ja Harbour
Operating System Microsoft Windows XP Media Center Edition 5.1.2600 (WinXP Retail)
Date 2005-08-25
Time 20:02


--------[ Overclock ]---------------------------------------------------------------------------------------------------

CPU Properties:
CPU Type Intel Pentium 4
CPU Alias Prescott
CPU Stepping C0
Engineering Sample No
CPUID CPU Name Intel(R) Pentium(R) 4 CPU 3.00GHz
CPUID Revision 00000F33h

CPU Speed:
CPU Clock 3011.58 MHz (original: 3000 MHz)
CPU Multiplier 15.0x
CPU FSB 200.77 MHz (original: 200 MHz)
Memory Bus 200.77 MHz

CPU Cache:
L1 Trace Cache 12K Instructions
L1 Data Cache 16 KB
L2 Cache 1 MB (On-Die, ECC, ATC, Full-Speed)

Motherboard Properties:
Motherboard ID 63-0411-009999-00101111-040201-VIA_P6$PT880MSI_A7043VMS V2.0 041105
Motherboard Name Unknown

Chipset Properties:
Motherboard Chipset VIA Apollo P4X533/PT880
Memory Timings 2.5-3-3-8 (CL-RCD-RP-RAS)
Command Rate (CR) 2T

SPD Memory Modules:
DIMM1 512 MB PC3200 DDR SDRAM (2.5-3-3-8 @ 200 MHz)
DIMM2 512 MB PC3200 DDR SDRAM (2.5-3-3-8 @ 200 MHz)

BIOS Properties:
System BIOS Date 04/11/05
Video BIOS Date 07/18/03
DMI BIOS Version Version 07.00T

Graphics Processor Properties:
Video Adapter nVIDIA GeForce4 MX 440 with AGP8X
GPU Code Name NV18 (AGP 8x 10DE / 0181, Rev A2)
GPU Clock 300 MHz
Memory Clock 216 MHz

id have to say its right then "whatever its showing your clock as" i opened everest up, at my stock speeds and as it was opened i oc'd my vid card and it updated my speeds right away.

I also just noticed if I underclock to 210, the stat changes to about 106. This pattern remains consistant. EVEREST continuously shows about 1/2 of what I'm clocked at...

Just installed and ran RivaTuner and it is telling me:

$0100000005 Core clock : 297.000MHz
$0100000006 Memory clock : 216.000MHz (432.000MHz effective)


Can someone tell me what the "432 effective" means vs the 216 number?

DDR Ram = Double Data Rate.

So the speed of the ram is "effectively" twice the clock, because it writes both on the up and down of a cycle.