Overclockers

RAMMAN · 09-06-05, 03:23 AM

2x512mb ocz platinum pc4800 elite edition or 2x512mb ocz gold pc4000 vx and remember, money is no object

.

El<(')>Maxi · 09-06-05, 04:26 AM

Personally I'd grab some PC4000 Redline's or an old set of Mushkin LII PC3500 1GB

RAMMAN · 09-06-05, 07:06 AM

so, high voltage memory beats low voltage memory in 01?

xTrEmEoVrClOcKr · 09-06-05, 08:44 AM

Probably cause it will do super lower timings @ super high clocks. 260, 1.5-2-2-5 will probably be what you get with enough voltage.

RAMMAN · 09-06-05, 08:50 AM

think 4000vx+ddr booster=t3h pwnag3?

xTrEmEoVrClOcKr · 09-06-05, 08:52 AM

I would think Mushkin + teh b00st3r = t3h pwnz0riat10n

RAMMAN · 09-06-05, 08:58 AM

im kinda commited to ocz.i might consider upgrading to some high voltage ram at christmas.

xTrEmEoVrClOcKr · 09-06-05, 09:06 AM

Ive seen some crazy results with the Redline, HouseRat's redline =

. I know price isn't an option but, the Mushkin Redline PC4000 is only like $200 USD for 1gb (512x2). Excellent price for the performance you get outta them. If your THAT attached to OCZ, get the PC4000VX w/ some DDR Boosters. BTW, whats wrong with your current ram?

RAMMAN · 09-06-05, 09:16 AM

one of the sticks have gone bad recently.will only work in slot 3.contacts on it appear to be chipped.both sticks are running together right now but only in single channel, ddr333 and 2t.should i rma?

EDIT:currently memtest and prime stable.

d]g[ts · 09-06-05, 06:03 PM

Imho this debate over high speed or low latency is more of an individual situation that makes 1 better that the other. And for people without unlucked multis (meaning ya dont have an FX) it makes it harder for each situation to work out. looking at your sig you have a 3200. With a 10X multi. so for you to run 1:1 your limited by memory speed which is a gamble for anything over 255 with some VX rams. so ya would need to look at running dividers, which for me ( but not everyone ) dividers have been sorta a headache. And with that ya may need to lower multi and run divider to make ram and CPU max out.

Now with high speed rams, ya need something thats gonna do close to 300mhz with nothing more than 2.5-3-3 timmings to be about the same as a BH/utt ram at 250. SO with a Tccd ram ya can get where ya want without dividers, but only need to drop multi. Only factor being that ur ram can do the 2.5-3-3 at the top speeds where ya need it. As lots of the higher end rams wont do 300 without raising trcd to 4. ( yes i know many do but none are a sure thing) Cus the trcd at 4 will kill system scores of 01. well it wont kill em, but will make it less than if your situation works with bh/utt ram at around 250.
For me I own both 4000vx, and gskill LE's and use whichever is best for the situation of clockspeed, multi, and ram limits.

El<(')>Maxi · 09-06-05, 08:16 PM

Very good points d]g[ts.

TCCD running a divider with that chip will be better if the dividers cooperate and his chip/cooling can take it beyond 2.7Ghz

d]g[ts · 09-06-05, 08:24 PM

Quote:

Originally Posted by El<(')>Maxi

Very good points d]g[ts.

TCCD running a divider with that chip will be better if the dividers cooperate and his chip/cooling can take it beyond 2.7Ghz

your just spoiled with FX's

the main thing is the dividers, and how, and if they work properly. I personaly like low latency memories, but sometimes with locked upper multis. TCCD based mems can better fit a certain situation. But it does work the other way too where bh/utt can work out better. all depends on where the chip maxes, and what combos your left with.

RAMMAN · 09-08-05, 08:29 PM

btw is it possible to run a mem divider higher than the stock 200? i see my bios shows options of 100, 133, 166, 183, 200, 216, 233 and 250 as far as i can remember.so is it possible to ramp up the mem speed using the higher mem dividers without touching the cpu clock/multiplier?

RAMMAN · 09-09-05, 06:46 AM

also my 01 score is still abnormally low.19932 at stock clocks.even that prescott setup i used to have did better than that! i think its because my ram will only run in single channel, ddr333(even though the mem divider is at 200 so whats up with that?) and 2t mode though i could be wrong it might be my cpu,s lack of clockspeed anyway both sticks of ram will be rma,d soon i swear.

local ocz supplier out of business...ocz fanboyism leaving...considering...other...brands

.

09-06-05, 03:23 AM	#1
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	which ocz ram will give me the highest 01 score? 2x512mb ocz platinum pc4800 elite edition or 2x512mb ocz gold pc4000 vx and remember, money is no object . __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat. Last edited by RAMMAN; 09-06-05 at 07:09 AM.

09-06-05, 04:26 AM	#2
El<(')>Maxi 3D Team Leader Join Date: May 2003 Location: Seattle	Personally I'd grab some PC4000 Redline's or an old set of Mushkin LII PC3500 1GB __________________ Burning Hardware since 2003 rdrash - 'I'm gonna intentionally try to kill this CPU with more volts' HousERaT - 'Bring me the women, bring me the finest meats and cheeses in all the land'

09-06-05, 07:06 AM	#3
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	so, high voltage memory beats low voltage memory in 01? __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat.

09-06-05, 08:44 AM	#4
xTrEmEoVrClOcKr member Join Date: May 2004 Location: San Diego, CA	Probably cause it will do super lower timings @ super high clocks. 260, 1.5-2-2-5 will probably be what you get with enough voltage. __________________ Budget Build: \| Q8200 \| Asus P5QL-E \| 4GB (2x2GB) GSKILL PC6400 \| PowerColor 4830 512MB @ 650 / 1900 \|

09-06-05, 08:50 AM	#5
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	think 4000vx+ddr booster=t3h pwnag3? __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat.

Overclockers

Internet Services

Website Development

Tech Hardware

09-06-05, 08:52 AM	#6
xTrEmEoVrClOcKr member Join Date: May 2004 Location: San Diego, CA	I would think Mushkin + teh b00st3r = t3h pwnz0riat10n __________________ Budget Build: \| Q8200 \| Asus P5QL-E \| 4GB (2x2GB) GSKILL PC6400 \| PowerColor 4830 512MB @ 650 / 1900 \|

09-06-05, 08:58 AM	#7
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	im kinda commited to ocz.i might consider upgrading to some high voltage ram at christmas. __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat.

09-06-05, 09:06 AM	#8
xTrEmEoVrClOcKr member Join Date: May 2004 Location: San Diego, CA	Ive seen some crazy results with the Redline, HouseRat's redline = . I know price isn't an option but, the Mushkin Redline PC4000 is only like $200 USD for 1gb (512x2). Excellent price for the performance you get outta them. If your THAT attached to OCZ, get the PC4000VX w/ some DDR Boosters. BTW, whats wrong with your current ram? __________________ Budget Build: \| Q8200 \| Asus P5QL-E \| 4GB (2x2GB) GSKILL PC6400 \| PowerColor 4830 512MB @ 650 / 1900 \|

09-06-05, 09:16 AM	#9
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	one of the sticks have gone bad recently.will only work in slot 3.contacts on it appear to be chipped.both sticks are running together right now but only in single channel, ddr333 and 2t.should i rma? EDIT:currently memtest and prime stable. __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat. Last edited by RAMMAN; 09-08-05 at 08:58 PM.

09-06-05, 06:03 PM	#10
d]g[ts Benching Team Member Join Date: Jul 2003 Location: pittsburgh	Imho this debate over high speed or low latency is more of an individual situation that makes 1 better that the other. And for people without unlucked multis (meaning ya dont have an FX) it makes it harder for each situation to work out. looking at your sig you have a 3200. With a 10X multi. so for you to run 1:1 your limited by memory speed which is a gamble for anything over 255 with some VX rams. so ya would need to look at running dividers, which for me ( but not everyone ) dividers have been sorta a headache. And with that ya may need to lower multi and run divider to make ram and CPU max out. Now with high speed rams, ya need something thats gonna do close to 300mhz with nothing more than 2.5-3-3 timmings to be about the same as a BH/utt ram at 250. SO with a Tccd ram ya can get where ya want without dividers, but only need to drop multi. Only factor being that ur ram can do the 2.5-3-3 at the top speeds where ya need it. As lots of the higher end rams wont do 300 without raising trcd to 4. ( yes i know many do but none are a sure thing) Cus the trcd at 4 will kill system scores of 01. well it wont kill em, but will make it less than if your situation works with bh/utt ram at around 250. For me I own both 4000vx, and gskill LE's and use whichever is best for the situation of clockspeed, multi, and ram limits. __________________ SUPPORT YOUR OC3DMark Team! heatware

09-06-05, 08:16 PM	#11
El<(')>Maxi 3D Team Leader Join Date: May 2003 Location: Seattle	Very good points d]g[ts. TCCD running a divider with that chip will be better if the dividers cooperate and his chip/cooling can take it beyond 2.7Ghz __________________ Burning Hardware since 2003 rdrash - 'I'm gonna intentionally try to kill this CPU with more volts' HousERaT - 'Bring me the women, bring me the finest meats and cheeses in all the land'

09-08-05, 08:29 PM	#13
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	btw is it possible to run a mem divider higher than the stock 200? i see my bios shows options of 100, 133, 166, 183, 200, 216, 233 and 250 as far as i can remember.so is it possible to ramp up the mem speed using the higher mem dividers without touching the cpu clock/multiplier? __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat. Last edited by RAMMAN; 09-08-05 at 09:03 PM.

09-09-05, 06:46 AM	#14
RAMMAN Member Join Date: Dec 2004 Location: gold coast, australia	also my 01 score is still abnormally low.19932 at stock clocks.even that prescott setup i used to have did better than that! i think its because my ram will only run in single channel, ddr333(even though the mem divider is at 200 so whats up with that?) and 2t mode though i could be wrong it might be my cpu,s lack of clockspeed anyway both sticks of ram will be rma,d soon i swear. local ocz supplier out of business...ocz fanboyism leaving...considering...other...brands . __________________ xfx gtx260 @ 700/1500/1150, core 2 extreme qx9650, 2x1gb crucial ballistix pc2 6400, gigabyte p35-ds3p, 74gb raptor, 750w thermaltake toughpower, 22in lcd and razer deathadder+exactmat. Last edited by RAMMAN; 10-04-05 at 01:41 AM.