[locaj]

?

ok you allready have a wc set up that conects to allmost every part on you mb
2xgpu cpu nb ram hd's or whatever

would it make a positive effect making a special closed shroud for the mach 2 gt to cover the wc radiator instead of just the cpu?

would it lower the wc close to freezing?
would all parts see a nice temp drop?

[clockless]

wont cool low engouh to be cost effective best thing is to run the same water cooling loop minus the cpu block all other componet tepms on the line will drop and run the gt on the cpu you will end up with a great hard core overclocked system

[crimedog]

first off the mach2 evaporator is not designed for water. my idea to get around this is to strap it to a waterblock to transfer heat.

second problem is a mach2 isn't designed to handle the heat from your entire system.

third is you're going to be running cold water so you're going to need to insulate the tubing, video cards, motherboard, cpu, etc.

as previously mentioned you're best off just running it how it's supposed to be run.

[turd]

Basically your talking about making a rather expensive, poorly designed water chiller. Search here for water chillers.

[Aphex_Tom_9]

i think you dont understand just how a mach works. do some more reading.