Stuck at 50 degs

Centercore · 12-04-05, 08:34 PM

This is quite concerning I used to check my temp with mobo moniter I was getting around 60-81 degrees I later installed speed fan I was getting the same uninstalled both reinstalled the new speed fan added 3 case fans went into the bios turned performance mode on fast computer froze turned it back to normal went and installed everest thats the point where it was all weird( this didnt happen in one day its just things I did leading up to when my cpu went to 50 degrees)

I checked it one my cpu temp and it was 50 decided to stress it went to about 52 degrees idle was about 48-53 it was really moving

im not sure what did this did mobo moniter install some driver or something or is this my real temps or did my temp probe break

I wanna oc some more but im not sure im getting 50o or really 90o

Know Nuttin · 12-05-05, 05:59 AM

have you updated the bios on your board?

CoreGamer · 12-05-05, 04:08 PM

Yeah definatly update your bios, it could me a problem there

Centercore · 12-05-05, 05:09 PM

ohh I was hoping you wouldnt say that

ive had a bad previous experience in that department

fAlCoNNiAn · 12-05-05, 05:20 PM

as stated before, the bios update might include corrections in the way the sensor reads the information.

i know that in one of my boards (ga-7NNXP) the temp sensor was corrected after a bios update.

Centercore · 12-05-05, 05:30 PM

Yeah I went to the site and it does have fixes for the sensor but if I screw it up my motherboard is useless

this sucks cause I want to but there is a chance of me f'ing things up

BigDan3131 · 12-05-05, 07:11 PM

I thought MSI was very easy to do updates of every kind very easily? Do you have problems because your on 56K? My bro and his best friend both have MSI mobo's and I thought they told me the system does everything for you.

Is the system in your sig the one your working on? That mobo supports dual channel doesnt it? If so pull the 256 stick and run it in dual channel. Im running 1.5 gbs till saturday when I get the other 1 gb stick. The BF2: SF needs alot of memory so 2Gbs should do it for now.

Centercore · 12-05-05, 08:09 PM

but they are different dont they need to be identical ram sticks anyway ill check out liveupdate hopefully itll work and I dont need to do the dos stuff

12-04-05, 08:34 PM	Thread Starter #1
Centercore Member Join Date: Nov 2005	Stuck at 50 degs This is quite concerning I used to check my temp with mobo moniter I was getting around 60-81 degrees I later installed speed fan I was getting the same uninstalled both reinstalled the new speed fan added 3 case fans went into the bios turned performance mode on fast computer froze turned it back to normal went and installed everest thats the point where it was all weird( this didnt happen in one day its just things I did leading up to when my cpu went to 50 degrees) I checked it one my cpu temp and it was 50 decided to stress it went to about 52 degrees idle was about 48-53 it was really moving im not sure what did this did mobo moniter install some driver or something or is this my real temps or did my temp probe break I wanna oc some more but im not sure im getting 50o or really 90o
	QUOTE Thanks

12-05-05, 05:59 AM	#2
Know Nuttin Senior Member Join Date: Mar 2004 Location: Ontario, Canada	have you updated the bios on your board? __________________ AMD Phenom II X4 965BE, Asus M5A88-V Evo, 8GB Mushkin Blackline DDR3-1600 , Coolermaster Hyper212+, OCZ Vertex Plus 60GB, Seagate 7200.11 500GB, Antec EA-380 Lenovo X200, P8400 C2D, 8GB, 120GB OCZ Vertex 3.
	QUOTE Thanks

12-05-05, 04:08 PM	#3
CoreGamer Member Join Date: Nov 2005	Yeah definatly update your bios, it could me a problem there
	QUOTE Thanks

12-05-05, 05:09 PM	Thread Starter #4
Centercore Member Join Date: Nov 2005	ohh I was hoping you wouldnt say that ive had a bad previous experience in that department
	QUOTE Thanks

12-05-05, 05:20 PM	#5
fAlCoNNiAn Member Join Date: May 2004 Location: Washington, D.C. \| Syracuse University	as stated before, the bios update might include corrections in the way the sensor reads the information. i know that in one of my boards (ga-7NNXP) the temp sensor was corrected after a bios update. __________________ Pentium 4 3.4E (SL7E6 D0 Step) @ 3.8 Ghz Stock vcore * Gigabyte 8KNXP Rev. 2.0 Mobo (i875) FK * 1.5 Gig Dual Channel 3200 Ram Samsung TCCC 3-3-3-6 1:1 * TTBT (Aerocool GateWatch) * Sapphire 9800 XT + ATI Sliencer 3 * OCZ Powerstream 600 Watt PSU .:..:.:. "Sitting on a bench in the sunshine, Filling up my belly with some fine wine."
	QUOTE Thanks

Stuck at 50 degs

Internet Services

Website Development

Tech Hardware

12-05-05, 05:30 PM	Thread Starter #6
Centercore Member Join Date: Nov 2005	Yeah I went to the site and it does have fixes for the sensor but if I screw it up my motherboard is useless this sucks cause I want to but there is a chance of me f'ing things up
	QUOTE Thanks

12-05-05, 07:11 PM	#7
BigDan3131 Member Join Date: Jan 2005 Location: Issaquah, Washington	I thought MSI was very easy to do updates of every kind very easily? Do you have problems because your on 56K? My bro and his best friend both have MSI mobo's and I thought they told me the system does everything for you. Is the system in your sig the one your working on? That mobo supports dual channel doesnt it? If so pull the 256 stick and run it in dual channel. Im running 1.5 gbs till saturday when I get the other 1 gb stick. The BF2: SF needs alot of memory so 2Gbs should do it for now. __________________ MSI X58 Platinum 950 cpu, X-FI 6Gb Patriot Viper 1333 1 1Tb Caviar black 2x460 GTX 2Gb Vid Too much info too little money = :mad: gamer Last edited by BigDan3131; 12-05-05 at 07:16 PM.
	QUOTE Thanks

12-05-05, 08:09 PM	Thread Starter #8
Centercore Member Join Date: Nov 2005	but they are different dont they need to be identical ram sticks anyway ill check out liveupdate hopefully itll work and I dont need to do the dos stuff
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search