Here it is...
i cant seem to run 1T timing with the memory that i have @ there default timings. I have tried both sets that i have (Kingston HyperX 3200AK2/1GR)@200,(HyperX 3500AK2/1GR)@217.
neither one will run. i have tried upping the volt all the way to 2.8 (factory is 2.6) on both. also lowering all timings 3-4-4-8 (factory is 2.5-3-3-7)Nada.
Now i can run the 3200 set @ 333 w/1t And the 3500 set @ 400 w/1t.
I even lowered my HTT to 4X. still nothing.
I tried upping CPU volts by .025-.15 ...still nothing
uped my chipset by .05 ...nothing
i have tried moving the ram from dimm 1&2 too 3&4... Nothing
checked the psu rails ([email protected])
I have the latest bios and platform drivers (except NIC driver, it was a problem).
I have an Aerogate II monitoring the temps (CPU@30 idle 36 load)
(mobo 31-33)
I dont think that is the problem.
i have had the 3200 set @ 210 on old system before running stable @2-3-3-6 2T (NF2)
Hell i dont know what the problem is...
The run down:
AMD64 3500+ 939
Epox 9nda3+
Kingston HyperX 3500 (2x512)
Ultra X connect 500w
N6600gt (agp)
SB Aud plat
2xWD160g (raid 0)
1xWD120g
CPU & GPU water cooled
please help
i cant seem to run 1T timing with the memory that i have @ there default timings. I have tried both sets that i have (Kingston HyperX 3200AK2/1GR)@200,(HyperX 3500AK2/1GR)@217.
neither one will run. i have tried upping the volt all the way to 2.8 (factory is 2.6) on both. also lowering all timings 3-4-4-8 (factory is 2.5-3-3-7)Nada.
Now i can run the 3200 set @ 333 w/1t And the 3500 set @ 400 w/1t.
I even lowered my HTT to 4X. still nothing.
I tried upping CPU volts by .025-.15 ...still nothing
uped my chipset by .05 ...nothing
i have tried moving the ram from dimm 1&2 too 3&4... Nothing
checked the psu rails ([email protected])
I have the latest bios and platform drivers (except NIC driver, it was a problem).
I have an Aerogate II monitoring the temps (CPU@30 idle 36 load)
(mobo 31-33)
I dont think that is the problem.
i have had the 3200 set @ 210 on old system before running stable @2-3-3-6 2T (NF2)
Hell i dont know what the problem is...
The run down:
AMD64 3500+ 939
Epox 9nda3+
Kingston HyperX 3500 (2x512)
Ultra X connect 500w
N6600gt (agp)
SB Aud plat
2xWD160g (raid 0)
1xWD120g
CPU & GPU water cooled
please help
