S skidpl8 Registered Joined Jan 21, 2004 Dec 30, 2005 #1 Does LANPARTY UT nF4 Ultra-D have Fan speed Control in Bios?
T TerraPhantm Member Joined Nov 28, 2005 Dec 30, 2005 #2 You can set it so it doesn't use the maximum fan speed until your processor reaches a temperature which you set.
You can set it so it doesn't use the maximum fan speed until your processor reaches a temperature which you set.
LegolasElf Member Joined Jul 29, 2005 Location Kenner, LA Dec 30, 2005 #3 i think you should be able to mess with the fan speeds from nTune
Tebore Member Joined Aug 15, 2001 Location Toronto,Canada(I can see you....) Dec 30, 2005 #4 I remember that you can set the Fan speed to be at slow for a set temp and full speed at another temp for the CPU fan. For the chipset it's default is off at under 25 degrees and slowly increases speed as temps go up until it hits 55 where it then goes to 100%. It can control one more case fan according to the PWM temps.
I remember that you can set the Fan speed to be at slow for a set temp and full speed at another temp for the CPU fan. For the chipset it's default is off at under 25 degrees and slowly increases speed as temps go up until it hits 55 where it then goes to 100%. It can control one more case fan according to the PWM temps.
-_{MoW}_-Assasi Member Joined Apr 20, 2005 Location Gday from Melbourne Australia! Dec 31, 2005 #5 i use ITE Smart Guardian to mess with fan speeds