Notices

Overclockers Forums > Hardware > Storage
Storage SSDs, HDDs, CD/DVD/Bluray
Forum Jump

Buggy Maxtor ATA HDD

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 01-28-06, 01:40 AM Thread Starter   #1
Mandachuva
Registered



Join Date: Jan 2006
Location: Timisoara

 
Buggy Maxtor ATA HDD


1600+ (1400Mhz) Athlon XP, oc'ed to 1750Mhz, generic 300w PSU, putting out 3.20V, 4.87V, 12.46V under idle load, 2 ATA 40Gb hard drives (one Maxtor, one Seagate), GeForce 2 MX400

I turn on the PC, and I hear it trying to spin up the Maxtor, and trying, and trying (for like 5-10 secs) then the power cuts off. SO, I turn off the PSU switch to let it calm down (nothing else works) for 10 secs, then try again. This time I hear the Maxtor finally spinning up to speed (after another 1-2 seconds of trying), but nothing else after this. Blank screen. I push the reset button, and now everything is working properly. I did burn-in test for hours after some of these power-ons, with no trouble at all. Sometimes, the Maxtor manages to spin-up the first time around, but I still get a black screen, and have to hit the reset button to get it working properly.

I've tried under-clocking my CPU, and removing the other HDD, and it seems to like that - it starts with more ease.

Is my Maxtor going the way of the dinosaurus, or could that be my PSU acting out???
Mandachuva is offline   QUOTE Thanks
Old 01-28-06, 04:02 AM   #2
FTC
Member

 
FTC's Avatar 

Join Date: Mar 2002
Location: Barcelona, Spain

 
Hi,

It could very well be your PSU or the BIOS hd controller startup routines that don't wait enough time for the drive to acquire necessary rotational speed.

I have a Maxtor Diamondmax9 200GBs that, when it was within an external USB enclosure, exhibited the same behavior at startup... now it lives inside my desktop and always spins up correctly..., so it can vey well be something external to the disk itself, but just in case, have a look at your SMART indicators, (specially the spin up time and spin up retry count) just to make sure your drive is OK.

__________________
AOpen s661FXM-FSN, PM "Dothan" 1.8 @ 2.61Ghz (1.66v),XP90 cooler, Sapphire HD3850 AGP. 2048MB uccc, WD Black 1Tb HDD. PLextor PX712A+PX760A
Canon iP5200R Printer. Lappy: IBM T400 C2D 2.4
FTC is offline   QUOTE Thanks
Old 01-28-06, 11:10 AM Thread Starter   #3
Mandachuva
Registered



Join Date: Jan 2006
Location: Timisoara

 
Had checked the SMART indicators beforehand : they're the same as before it was acting out.

This problem appeared in the following manner : I started oc'ing my XP, no trouble. I kept to it for about a week, no trouble. I put an additiona HDD (Seagate ATA), the problem appeared. BUT, as I mentioned, now, even if I take the other HDD out, the problem is still there...
Mandachuva is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Storage
Storage SSDs, HDDs, CD/DVD/Bluray
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 04:39 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?