Notices

Overclockers Forums > Hardware > Display and Sound Technology > Sound Systems & Audio Devices
Sound Systems & Audio Devices Including sound cards, speakers and other audio devices.
Forum Jump

Car Stero Question?

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 02-21-06, 09:49 PM Thread Starter   #1
DerekDRP
Disabled

 
DerekDRP's Avatar 

Join Date: Jul 2004
Location: No Truss Passing :)

 
Car Stero Question?


ok can you guys name pros & cons of this set up

first one will be this

2x10 Kappa series 1's powered by a rockford fosgate 600 watt amp. and a stock head unit w/ line converter and stock speakers w/ poineer 6x9's installed in the back doors.


Sytem #2
1x15 inch car sub with box powered by a rockford fosgate 600 watt amp. and a stock head unit w/ line converter and stock speakers w/ poineer 6x9's installed in the back doors.
DerekDRP is offline   QUOTE Thanks
Old 02-21-06, 10:51 PM   #2
The_Jizzler
Member

 
The_Jizzler's Avatar 

Join Date: Feb 2003
Location: To the Moon

 
the 15 will probabbly stay flatter going lower whereas the 10's wil be more punchy with a sharper rolloff at the lowend. db wise will probably be about the same.
The_Jizzler is offline   QUOTE Thanks
Old 02-21-06, 11:05 PM   #3
Randyman...
Member

 
Randyman...'s Avatar 

Join Date: May 2004
Location: Houston, TX

 
I'd also STRONGLY recommend getting some solid front-stage components and amplification to pull your soundstage and imaging up front - where it belongs! A loud clean system is fantastic, but one with a good soundstage is pure heaven...

I am in my 10" phase of my life (Well, 10"s in my Truck, 10"s in the Home Stereo, but 18"s in the PA Mwwhuaahuwaaa!!!) - so I'd say go for the 10"s


__________________
Randy V - Audio-Dude/Musician/PC Guru/Crazy Guy

PC#1 (Main Rig) : Lian Li PC-V1010 / P8Z68-V-GEN3 / 3750K @ 4.5GHz + Ven-X / 16GB G.Skill DDR3-1600 / HD5770 "XXX" 1GB / Samsung 830 256GB SSD / (6x) 2TB 5K3000 on Areca ARC1222 in RAID-6 / Seasonic X660 PSU / 2407WFP-HC / RME "Multiface" 38 Ch. Audio I/O / Dynaudio AIR-15 + AIR-BASE-2 Studio Monitors
PC#2 (Realtime DAW) : Lian-Li PC-K65B / Sabertooth X79 / i7-3820 @ 4.8GHz + TRUE / 8GB RipJaws DDR3-2133 / HD6570 / 120GB Intel 520 / 4x 1TB on Areca ARC-1210 in RAID-5 / RME "HDSPe MADI" 128 Channel Audio I/O / 2x SSL AlphaLink MADI AX / 48 Mic Inputs + Fully-discrete Mic Preamps + 4260Watt PA System with 5x 18" JBL Subs :-)
NAS#1: NSC-800 ITX Case / Asus P8H61-ITX / i3-2120 / (8x) 1TB 7200.12's in RAID-6 on Areca ARC-1220 Card
NAS#2: 12TB ReadyNAS Ultra-4+ / (4x) 3TB 5K3000's
And 7 other i7/i5/C2D/C2Q PC's

Last edited by Randyman...; 02-21-06 at 11:10 PM.
Randyman... is offline   QUOTE Thanks
Old 02-21-06, 11:11 PM   #4
Mr. Roboto
Member

 
Mr. Roboto's Avatar 

Join Date: Dec 2005
Location: Boston, MA

 
i still think 12's are a perfect balance. Got 2 of them in my trunk, and they still are plenty punchy, but can hit the lows that the 10's cant.

__________________
Main Rig: e8400 l ASUS P5K Deluxe l G.Skill 4GB HZ's l GTX 280 l 2x320gb 7200.10 Raid 0 l X-FI Platinum l CM Stacker 830 l OCZ 700W GameXtreme l Logitech z-5500's l G5 l Saitek Eclipse II l 2 x 2407 WFP
HTPC:P4 2.8 l 1.5GB ram l 7600GS l HVR-1600 l 400gb raid 0 l Audigy 1 l Coolermaster 280 l 37" Olevia
Mr. Roboto is offline Heatware Profile   QUOTE Thanks
Old 02-21-06, 11:12 PM   #5
Randyman...
Member

 
Randyman...'s Avatar 

Join Date: May 2004
Location: Houston, TX

 
^^
That would depend on the 10"s . Four Punch HE-2's on a BD1500.1 (1500Watts RMS) will hit 20Hz pretty good

__________________
Randy V - Audio-Dude/Musician/PC Guru/Crazy Guy

PC#1 (Main Rig) : Lian Li PC-V1010 / P8Z68-V-GEN3 / 3750K @ 4.5GHz + Ven-X / 16GB G.Skill DDR3-1600 / HD5770 "XXX" 1GB / Samsung 830 256GB SSD / (6x) 2TB 5K3000 on Areca ARC1222 in RAID-6 / Seasonic X660 PSU / 2407WFP-HC / RME "Multiface" 38 Ch. Audio I/O / Dynaudio AIR-15 + AIR-BASE-2 Studio Monitors
PC#2 (Realtime DAW) : Lian-Li PC-K65B / Sabertooth X79 / i7-3820 @ 4.8GHz + TRUE / 8GB RipJaws DDR3-2133 / HD6570 / 120GB Intel 520 / 4x 1TB on Areca ARC-1210 in RAID-5 / RME "HDSPe MADI" 128 Channel Audio I/O / 2x SSL AlphaLink MADI AX / 48 Mic Inputs + Fully-discrete Mic Preamps + 4260Watt PA System with 5x 18" JBL Subs :-)
NAS#1: NSC-800 ITX Case / Asus P8H61-ITX / i3-2120 / (8x) 1TB 7200.12's in RAID-6 on Areca ARC-1220 Card
NAS#2: 12TB ReadyNAS Ultra-4+ / (4x) 3TB 5K3000's
And 7 other i7/i5/C2D/C2Q PC's
Randyman... is offline   QUOTE Thanks
Old 02-21-06, 11:16 PM   #6
Mr. Roboto
Member

 
Mr. Roboto's Avatar 

Join Date: Dec 2005
Location: Boston, MA

 
Quote:
Originally Posted by Randyman...
^^
That would depend on the 10"s . Four Punch HE-2's on a BD1500.1 (1500Watts RMS) will hit 20Hz pretty good
that's true, but you can get away with spending less if you go the 12' route. Still really a matter of preferance.

__________________
Main Rig: e8400 l ASUS P5K Deluxe l G.Skill 4GB HZ's l GTX 280 l 2x320gb 7200.10 Raid 0 l X-FI Platinum l CM Stacker 830 l OCZ 700W GameXtreme l Logitech z-5500's l G5 l Saitek Eclipse II l 2 x 2407 WFP
HTPC:P4 2.8 l 1.5GB ram l 7600GS l HVR-1600 l 400gb raid 0 l Audigy 1 l Coolermaster 280 l 37" Olevia
Mr. Roboto is offline Heatware Profile   QUOTE Thanks
Old 02-22-06, 08:18 AM Thread Starter   #7
DerekDRP
Disabled

 
DerekDRP's Avatar 

Join Date: Jul 2004
Location: No Truss Passing :)

 
Remeber guys I will be giging this summer & I will need my trunk space. And my subs ARE really really old like mybe 1990-ish 1995-ish. so what else can you guys suggest?
DerekDRP is offline   QUOTE Thanks
Old 02-22-06, 03:08 PM   #8
techun
Member

 
techun's Avatar 

Join Date: Jul 2004

 
are you looking for a reason to spend more money? lol
i say use the subs you have
and upgrade the front speakers, not the rear.

why do u care what people in the back seat will hear :-p

__________________
Sugo SFF cube case
4850 45W
4 gigs ddr2 800
7200.11 500gig
techun is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Display and Sound Technology > Sound Systems & Audio Devices
Sound Systems & Audio Devices Including sound cards, speakers and other audio devices.
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 01:05 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?