- Joined
- Oct 24, 2001
- Location
- San Antonio, TX
8kha+ FF code, no POST, HSF cold...lesson learned
I had my system working fine. Then I tinkered with it.
I did the Vcore mod, with the 220Kohm resistor.
I redid the ASII on the HSF, lapped the SK-6.
Anyway, I put it all back together, and I get the FF code, no beeps, no POST, no video signal, and the SK-6 is still cold. There's no way the t-bird is getting power.
So I pulled the HSF back off, and the t-bird looks fine, no chips or burns.
Yes, I did the clear CMOS, remove all IDE, have only ram, cpu, and agp in there. No go.
Any help? thanks!
I had my system working fine. Then I tinkered with it.
I did the Vcore mod, with the 220Kohm resistor.
I redid the ASII on the HSF, lapped the SK-6.
Anyway, I put it all back together, and I get the FF code, no beeps, no POST, no video signal, and the SK-6 is still cold. There's no way the t-bird is getting power.
So I pulled the HSF back off, and the t-bird looks fine, no chips or burns.
Yes, I did the clear CMOS, remove all IDE, have only ram, cpu, and agp in there. No go.
Any help? thanks!
Last edited: