Rosetta

nucligator · 06-10-06, 02:40 PM

Hey peeple

After a 2-year hiatus (spent working the Helpdesk[yuK] and then learning an Admin job) I am back to folding with 12 rigs for now, but I am running BOINC and folding for Rosetta.

The client seemed to be less difficult for me as I am not a coder. The last time I had programming was FortranIV and the first version of BASIC. I know, that makes me older than diRt.

Here is my question for you all (yeehaw, in Arkansaw). Am I really doing good for the old OC team by running BOINC?

another Q - will we ever get a F@H application that runs in BOINC?

chEErZ~~~~~~~~~~~

nUcLiGaToR

cw823 · 06-10-06, 02:42 PM

/me considers adding Rosetta and BOINC to swear filter in Folding forum.

nucligator · 06-10-06, 02:51 PM

figures the first thing I would do is get in trouble...... geeeeeeesh!

the garynator · 06-10-06, 07:00 PM

Quote:

Originally Posted by cw823

/me considers adding Rosetta and BOINC to swear filter in Folding forum.

DOOOO EEEEETTT!!!

Welcome to the forums man... From the little bit I've read about BIONIC, I wouldn't get your hopes up for f@h on it anytime soon

Fold On!

silent bob · 06-10-06, 09:13 PM

wasnt there a TV show called YEEEHAW? like one of those comedy hour shows?

sno.lcn · 06-10-06, 09:15 PM

Quote:

Originally Posted by silent bob

wasnt there a TV show called YEEEHAW? like one of those comedy hour shows?

It was hee-haw. The only reason I know is my grandma has all the eps. on dvd.

nucligator · 06-13-06, 03:55 PM

so opine therefore.

Am I really helping the team by running that unmentionable piece of software that makes things easy for me?

I am putting up some big numbers in Ros.... I mean that project I cannot name because it is a bad word.

LOL

TollhouseFrank · 06-13-06, 04:45 PM

Rosetta and F@H use similar processes for different means.

You are surely helping out the Rosetta project a bunch... but lemme let you in on a secret... F@H is 10x easier to set up than BOINC.

dwschoon · 06-13-06, 05:06 PM

Quote:

Originally Posted by TollhouseFrank

Rosetta and F@H use similar processes for different means.

You are surely helping out the Rosetta project a bunch... but lemme let you in on a secret... F@H is 10x easier to set up than BOINC.

two words

ONE CLICK

That's how easy FAH is. You do have to setup a config file, but it is very easy. FAH will run as a service in the background and you wont even know it is there.

Speedmonkay · 06-13-06, 05:42 PM

Quote:

Originally Posted by cw823

/me considers adding Rosetta and BOINC to swear filter in Folding forum.

I dare you .... in fact , I double gromac dare you !

maddog39 · 06-15-06, 09:47 PM

OMG! F@H is the worst designed program I have ever seen. It doesnt work half the time and it cant handle network connections on its own like BOINC can and I cant ever get it to work.

sno.lcn · 06-15-06, 09:49 PM

Quote:

Originally Posted by maddog39

OMG! F@H is the worst designed program I have ever seen. It doesnt work half the time and it cant handle network connections on its own like BOINC can and I cant ever get it to work.

I love fah, never had a single problem with it. BOINC, on the other hand, was just giving me some problems today.

I luv fah.

nucligator · 07-02-07, 09:40 PM

ok, after a year and learning two more sysadmins, I am now folding again using the FAH client on as many rigs as possible at work (borgie, borgie) and at home.

My processor count is staying around 40 but should continue to climb slowly...

traldan · 07-02-07, 10:14 PM

Quote:

Originally Posted by nucligator

ok, after a year and learning two more sysadmins, I am now folding again using the FAH client on as many rigs as possible at work (borgie, borgie) and at home.

My processor count is staying around 40 but should continue to climb slowly...

Excellent choice!

Good to know you've returned from the Dark Side...er...Rosetta project.

Sleepy_Steve · 07-02-07, 10:15 PM

Neat! Played with SMP at all in the past year??

pscout · 07-02-07, 10:22 PM

to T32 (finally

)

I have noticed you climbing the stats quickly and am glad to see you here

And

to OCF too!

LandShark · 07-03-07, 12:47 AM

back!!

nucligator · 07-03-07, 02:45 AM

yeah, tried SMP for a while but it seemed like it was hangin up at some point. Rather than dedicate the time required to figger it out I just went back to running two instances on this machine.

Also got my oldest (EspiE) into folding on his mac and some other machines so he is doing it too...

workin toward the first million.........

traldan · 07-03-07, 08:32 AM

I'd say SMP is well worth it if you can get it working, it's a pretty large boost in PPD.

nucligator · 07-03-07, 09:48 AM

perhaps when SMP has had some time to mature a bit more I will try again... or if I actually get to buy that dual quad-core I have been looking at I will have an even better reason!!!

06-10-06, 02:40 PM	Thread Starter #1
nucligator Registered Join Date: Feb 2004 Location: mudhole, arkansaw.	Rosetta Hey peeple After a 2-year hiatus (spent working the Helpdesk[yuK] and then learning an Admin job) I am back to folding with 12 rigs for now, but I am running BOINC and folding for Rosetta. The client seemed to be less difficult for me as I am not a coder. The last time I had programming was FortranIV and the first version of BASIC. I know, that makes me older than diRt. Here is my question for you all (yeehaw, in Arkansaw). Am I really doing good for the old OC team by running BOINC? another Q - will we ever get a F@H application that runs in BOINC? chEErZ~~~~~~~~~~~ nUcLiGaToR
	QUOTE Thanks

06-10-06, 02:42 PM	#2
cw823 Honeybadger Moderator Join Date: Dec 2000 Location: Earth	/me considers adding Rosetta and BOINC to swear filter in Folding forum. __________________ As of 9/2012 I am semi-inactive honeybadger moderator smacks the **** out of people that cause issues in the classified section Heatware: cw823 Paypal: paypal @ cw823 dot com Adak - My spreader bar was shaped using a pair of vise grips, a hammer, and the tow receiver on my pick up Support your forum: http://www.newegg.com/
	QUOTE Thanks

06-10-06, 02:51 PM	Thread Starter #3
nucligator Registered Join Date: Feb 2004 Location: mudhole, arkansaw.	figures the first thing I would do is get in trouble...... geeeeeeesh!
	QUOTE Thanks

06-10-06, 09:13 PM	#5
silent bob Team 32 Folding Ghetto Hanging PC Senior Join Date: Jan 2001 Location: in "The Cave "	wasnt there a TV show called YEEEHAW? like one of those comedy hour shows? __________________ Heat Early in life I had to choose between honest arrogance and hypocritical humility. I chose the former and have seen no reason to change. Frank Lloyd Wright "Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind." - Dr. Seuss
	QUOTE Thanks

06-13-06, 03:55 PM	Thread Starter #7
nucligator Registered Join Date: Feb 2004 Location: mudhole, arkansaw.	my question - so opine therefore. Am I really helping the team by running that unmentionable piece of software that makes things easy for me? I am putting up some big numbers in Ros.... I mean that project I cannot name because it is a bad word. LOL
	QUOTE Thanks

Rosetta

Internet Services

Website Development

Tech Hardware

06-13-06, 04:45 PM	#8
TollhouseFrank Senior Headphone Guru Join Date: Nov 2004 Location: T3h Intr@tub3z!	Rosetta and F@H use similar processes for different means. You are surely helping out the Rosetta project a bunch... but lemme let you in on a secret... F@H is 10x easier to set up than BOINC. __________________ Become a fan on Facebook! \| Help improve overclockers.com! Get involved! \| Follow us on Twitter!
	QUOTE Thanks

06-15-06, 09:47 PM	#11
maddog39 Join Date: May 2006 Location: Somerville, MA	OMG! F@H is the worst designed program I have ever seen. It doesnt work half the time and it cant handle network connections on its own like BOINC can and I cant ever get it to work. __________________ My Rig: Windows 7 64 EVGA nForce 780i SLI Intel Core 2 Quad Q6600 @ 3.21GHz VCORE 1.325 4x1GB Corsair XMS2 DDR2 800 EVGA GTX 260 C216 SSC 896MB
	QUOTE Thanks

07-02-07, 09:40 PM	Thread Starter #13
nucligator Registered Join Date: Feb 2004 Location: mudhole, arkansaw.	BACK FROM THE DEAD ok, after a year and learning two more sysadmins, I am now folding again using the FAH client on as many rigs as possible at work (borgie, borgie) and at home. My processor count is staying around 40 but should continue to climb slowly...
	QUOTE Thanks

07-02-07, 10:15 PM	#15
Sleepy_Steve Join Date: Dec 2004 Location: VT... or MD	Neat! Played with SMP at all in the past year?? __________________ CPU i7-2600 Cooling CM 212+ w/ 2 fans RAM 4x4gb G.Skill DDR3 1333 Video 9800GT & 8600GT Storage 1TB Raid0 system & 2TB storage HEAT
	QUOTE Thanks

07-02-07, 10:22 PM	#16
pscout Senior Newbie Cannon-Fodder - R. I. P. good buddy :( Join Date: Nov 2004 Location: Toronto	to T32 (finally ) I have noticed you climbing the stats quickly and am glad to see you here And to OCF too! __________________ Main Rig - p5b-d, E6600@3.15 Folding rigs - usually linux-64: 2xQ6600 B3 @3.0, 3.1 p5w64, DS3 4x Q6600 GO @ 3.1-3.3 on p35-DS3R/DS3L, p5k 4x x3210 B3 @3.0-3.1 on DS3 rev 3.3 x3220 B3 @3.0 on g33-ds2r 3x E6600 @2.8-3.5 on p5b, ds3, p5w64 E6320 @ 3.15 on ds3 1x930 c1 @4.0 on p5wd2-E Folding for OCF Team 32 as pete_scout
	QUOTE Thanks

07-03-07, 12:47 AM	#17
LandShark Super Shark Moderator Join Date: Aug 2001 Location: Deep Blue Sea (Maryland)	back!! __________________ ~~~ Currently Inactive Mode ~~~ Got SOLD? MOVE your own thread! How many GHz of Intel + Nvidia folding power? Dunno! Lost count! \| F@H Vista Sidebar gadget \| F@H Yahoo Widget \| F@H iGoogle gadget \| \| My Heatware \| My New HTPC 3.0: Server/Client setup + Better energy efficiency \|
	QUOTE Thanks

07-03-07, 02:45 AM	Thread Starter #18
nucligator Registered Join Date: Feb 2004 Location: mudhole, arkansaw.	yeah, tried SMP for a while but it seemed like it was hangin up at some point. Rather than dedicate the time required to figger it out I just went back to running two instances on this machine. Also got my oldest (EspiE) into folding on his mac and some other machines so he is doing it too... workin toward the first million.........
	QUOTE Thanks

07-03-07, 08:32 AM	#19
traldan Join Date: Feb 2005 Location: Folding in Maryland!!	I'd say SMP is well worth it if you can get it working, it's a pretty large boost in PPD. __________________ .:Bliss:. .:Q6600 G0 3.0Ghz - Ultra 120 Extreme/Ultrakaze 120mm (130CFM!) - possibly dead? .:Gigabyte GA-P35-DS3R .:4GB (2x2) G.Skill DDR2-1000 .:Sapphire X1900XT .:Sparkle FSP550PLG-SLI .:160GB Hitachi Deathstar, 500GB Maxtor .:Hyundai L90D+ Folding 24/7 for TEAM 32
	QUOTE Thanks

07-03-07, 09:48 AM	Thread Starter #20
nucligator Registered Join Date: Feb 2004 Location: mudhole, arkansaw.	perhaps when SMP has had some time to mature a bit more I will try again... or if I actually get to buy that dual quad-core I have been looking at I will have an even better reason!!!
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search