Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
It's high binned TCCD, iLLestOne is correct, keep vdimm at 2.8 or lower. If you post your settings we can help tweek.Avg said:I just got these sticks from mushkin (long story) and it's very different from my previews XP4000 redline sticks, so I'm having some trouble getting it to run at it's rated specs.
And it's still no go, I got up to 250mhz 1:1 but it won't go any higher, it's like there is a wall their no matter the timming I tried it wouldn't pass test#8 on memtest86+ I didn't even get any errors, the test just freezes up.Tcl: 2.5
Trcd: 4
Tras: 8
Trp: 4
Trc: 12
Trfc: 16
Trrd: 3
Twr: 3
Twtr: 2
Trwt: 3
Tref: 3120 / 3072
Avg said:Well I used these timmings
And it's still no go, I got up to 250mhz 1:1 but it won't go any higher, it's like there is a wall their no matter the timming I tried it wouldn't pass test#8 on memtest86+ I didn't even get any errors, the test just freezes up.
What is your drive strength at? And RP & MAL?Avg said:Well I used these timmings
And it's still no go, I got up to 250mhz 1:1 but it won't go any higher, it's like there is a wall their no matter the timming I tried it wouldn't pass test#8 on memtest86+ I didn't even get any errors, the test just freezes up.