AK31 r3.1

Here is what I have
--------------------------------------
My Computer:
Shuttle AK31 r3.1
128 MB Crucial PC-1600
Athlon 1.133 GHz
Volcano 6cu+ with a 80mm 59.9 CM Fan
eVGA GeForce 2 MX200 32MB
Promise ATA 100TX2
SoundBlaster Live!
Netgear FA310TX
30.7 GB IBM 75GXP
Removable bay W/ 30 GB Western Digital
Pioneer DVD-116 16X DVD
HP 9100i 8x4x32x
--------------------------------------
I think my rebooting problem is caused by the PC-1600.
When I set the bus to 200Mhz which put the processor to 850Mhz
it worked perfectly rock solid stable. Now I will not settle for 850Mhz form a 1.133Ghz. I have a 300Watt PSU. I think it is the PC-1600 or the Vcore. What do you guys think it is? The bios says the vcore is running at 1.75. Shoud I take the vcore to 1.76 and take it to 1.133Ghz 266Bus. Or should I get the PC-2100.

I think you need the 2100 ram, at 266 I think it is too much for the 1600.

Thank

Thank I thought it was Pc-1600 to

I got PC-2100

I just got one stick of 256MB Crucial PC-2100 ECC Registared

Yeah, toss the PC1600 or else run your CPU at 11x100 FSB.

I'd also toss the MX200 but that's just my opinion

SB

Yeah I put in Crucial PC-2100 ECC 250MB and it is Rock Solid Stable
That fixed it all

As for the MX200 It was all I could get after My Voodoo 3 3500TV Died
MONEY WAS THE DECITEING FACTOR

I know I was ready to shoot my self for getting an MX but is runs quite well and I cant say that is does not put 100% effort in to my gaming. It is a great card for $55