abit aw9d-max in hipro's hands

Evilsizer · 10-08-06, 12:27 AM

http://www.xtremesystems.org/forums/...d.php?t=117559

Rocinante · 10-08-06, 11:00 AM

Nice, now we just need to see what our members can do with this thing...I'm sure hipro's is heavily modified for Vdroop and other stuff...

It would be nice to see what a bone stock AW9D will do...

Evilsizer · 10-08-06, 11:03 AM

Quote:

Originally Posted by Rocinante

Nice, now we just need to see what our members can do with this thing...I'm sure hipro's is heavily modified for Vdroop and other stuff...

It would be nice to see what a bone stock AW9D will do...

doesnt seem that way from reading the voltages he is using it is all bios. the only thing that make hipro different is this "DDR Maximizer". IIRC allows voltages up to 5v. think of it like the OCZ ram booster from a while back for BH-5 ram.

batboy · 10-08-06, 08:20 PM

Hipro is my hero. He can tweak every last MHz out of an Abit.

Here is my bone stock AW9D-Max I just installed today.
Only thing I've done is flashed to BIOS 1.2.
System specs are in my signature.

Rocinante · 10-14-06, 05:06 PM

That is fantastic...I can't wait for the BadAxeII to show up...my new motherboard purchase is going to be a tough one to figure out...

Evilsizer · 10-14-06, 10:08 PM

yep going to be lots more choices to choose from soon along with rd600.

hipro5 · 10-18-06, 03:40 AM

Hi there guys......

Thanks batboy for your kind words....

So far this mobo can reach up to 496MHz benchable fsb and 489MHz 3D benchable fsb with 2 x 512MB Corsair 8000UL Fatbodies and at 1:1 .....

Below are some "older" fsb archivements though......

Evilsizer · 10-18-06, 03:46 AM

WOW good work hipro5, thanks!

Rocinante · 10-18-06, 06:28 PM

Quote:

Originally Posted by hipro5

Hi there guys......

Thanks batboy for your kind words....

So far this mobo can reach up to 496MHz benchable fsb and 489MHz 3D benchable fsb with 2 x 512MB Corsair 8000UL Fatbodies and at 1:1 .....

Is this a stock board, or have you put your "special" skills to work on that bad boy???

I remember doing a few of your mods on my IC7-G...I hope you post up the mods for this board like you did for that one (if it needs any mods)

hipro5 · 10-19-06, 02:12 AM

No it's also full moded.....

I'll post all the mods any time soon....

greenmaji · 10-19-06, 02:29 AM

hipro any chance you could put some new D9's to the 1:1 FSB test?
And what bios ver. are you using for those benches? Will the release be availble soon?
TIA

Quote:

Originally Posted by hipro5

I'll post all the mods any time soon....

And I'm very much looking forward to reading that

Albaholic · 10-19-06, 02:51 AM

WOW, that is f'n sweet. Make me want a 10x multi.... cant wait to see those mods

Edit: OMG just looked at the XS thread 3.4v that takes some B@LLS

10-08-06, 12:27 AM	Thread Starter #1
Evilsizer Senior Fourm Spammer Join Date: Jun 2002 Location: Austin,Texas	abit aw9d-max in hipro's hands http://www.xtremesystems.org/forums/...d.php?t=117559 __________________ i7 920@3.6ghz \| Asus R2G \| GK F3-12800CL7D-4GBRH \| Galaxy GTX660 GC \| C650TX \| OCZ VERTEX EX 120GB, VERTEX 250GB i3 330m \| Jetway NF98 \| 2x2gig DDR3-1066 \| pico 120WI i5 2450 \| Jetway JNF9G-QM77 \| 2x2gig DDR3-1333 \| WIP "I Love To Camp!" "Commensing Shock Therapy!" I'm jonnyGURU of jonnyGURU.com and we don't overload PSU's - JonnyGURU HeatWare
	QUOTE Thanks

10-08-06, 11:00 AM	#2
Rocinante Member Join Date: Nov 2002 Location: Houston, TX	Nice, now we just need to see what our members can do with this thing...I'm sure hipro's is heavily modified for Vdroop and other stuff... It would be nice to see what a bone stock AW9D will do...
	QUOTE Thanks

10-08-06, 08:20 PM	#4
batboy Senior Moment Join Date: Jan 2001 Location: Kansas, USA	Hipro is my hero. He can tweak every last MHz out of an Abit. Here is my bone stock AW9D-Max I just installed today. Only thing I've done is flashed to BIOS 1.2. System specs are in my signature. __________________ 2600K, Asus P8P67 Deluxe, 2X2GB G.Skill Pi PC3-2133, PC & Cooling 750W watercooled: Eheim 1048 pump, Swiftech Apogee GTX and 2X120mm rad FS020 case, OCZ SSD, Sapphire HD 6950, Acer X241W 24" widescreen
	QUOTE Thanks

10-14-06, 05:06 PM	#5
Rocinante Member Join Date: Nov 2002 Location: Houston, TX	That is fantastic...I can't wait for the BadAxeII to show up...my new motherboard purchase is going to be a tough one to figure out...
	QUOTE Thanks

10-14-06, 10:08 PM	Thread Starter #6
Evilsizer Senior Fourm Spammer Join Date: Jun 2002 Location: Austin,Texas	yep going to be lots more choices to choose from soon along with rd600. __________________ i7 920@3.6ghz \| Asus R2G \| GK F3-12800CL7D-4GBRH \| Galaxy GTX660 GC \| C650TX \| OCZ VERTEX EX 120GB, VERTEX 250GB i3 330m \| Jetway NF98 \| 2x2gig DDR3-1066 \| pico 120WI i5 2450 \| Jetway JNF9G-QM77 \| 2x2gig DDR3-1333 \| WIP "I Love To Camp!" "Commensing Shock Therapy!" I'm jonnyGURU of jonnyGURU.com and we don't overload PSU's - JonnyGURU HeatWare
	QUOTE Thanks

abit aw9d-max in hipro's hands

Internet Services

Website Development

Tech Hardware

10-18-06, 03:40 AM	#7
hipro5 Member Join Date: Jun 2002 Location: Athens---Hellas	Hi there guys...... Thanks batboy for your kind words.... So far this mobo can reach up to 496MHz benchable fsb and 489MHz 3D benchable fsb with 2 x 512MB Corsair 8000UL Fatbodies and at 1:1 ..... Below are some "older" fsb archivements though......
	QUOTE Thanks

10-18-06, 03:46 AM	Thread Starter #8
Evilsizer Senior Fourm Spammer Join Date: Jun 2002 Location: Austin,Texas	WOW good work hipro5, thanks! __________________ i7 920@3.6ghz \| Asus R2G \| GK F3-12800CL7D-4GBRH \| Galaxy GTX660 GC \| C650TX \| OCZ VERTEX EX 120GB, VERTEX 250GB i3 330m \| Jetway NF98 \| 2x2gig DDR3-1066 \| pico 120WI i5 2450 \| Jetway JNF9G-QM77 \| 2x2gig DDR3-1333 \| WIP "I Love To Camp!" "Commensing Shock Therapy!" I'm jonnyGURU of jonnyGURU.com and we don't overload PSU's - JonnyGURU HeatWare
	QUOTE Thanks

10-19-06, 02:12 AM	#10
hipro5 Member Join Date: Jun 2002 Location: Athens---Hellas	No it's also full moded..... I'll post all the mods any time soon....
	QUOTE Thanks

10-19-06, 02:51 AM	#12
Albaholic Member Join Date: Sep 2001 Location: Oahu, Hawaii	WOW, that is f'n sweet. Make me want a 10x multi.... cant wait to see those mods Edit: OMG just looked at the XS thread 3.4v that takes some B@LLS __________________ Heat Last edited by Albaholic; 10-19-06 at 03:00 AM.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search