Hercules 3DPROPHET II MX

trapper · 11-26-01, 04:41 PM

Hercules 3DPROPHET II MX

How overclockable is my card and do i use the util that is part of the setts if so whats reccommended rates as i turned the 2 sliders up to the max once and pc didn't boot

,,,,,,,,,cheerz guyz trapper

Celeron cBo 600 @ 901 (100fsb)
1.90cv
Elite Groups P6BXT-A+ board
2x64mb pc 100
1x128mb pc 100
Hercules 3DProphet II MX(nVIDIA chip)
8x4x32 r/rw
*xCD (space filler just now as im on my 11th or 12th drive!!)
2xwdCaviars' =16.6gig
soundblaster16 pci
1xamplified subwoofer&1x TEAC superwoofer
2x TEAC satellite tweeters(very loud

)

Maximus Nickus · 11-26-01, 05:00 PM

Could you be clearer with the details? What program are you using?

And surely you meant it hung, not "it wouldn't boot" as the oc'ing doesn't activate until you enter windows.

I had a Hercules 3D Prophet 2 mx 64mb, is was ok but when taking the crummy blue hsf off to oc it it broke (this happened twice!!!) I found them to be very delicate, although there are diff versions mine was like a square shape some are rectangles so these could be better.

What are the default clock speeds?

I could only get mine from 175 core to 210 (it was slower though!!!) and mem to 181 from 175!!! Thats why the core was slowing it down because MX's have limited bandwidth.

Just be careful when you oc it though!!!

Good Luck,
Nick

asmodean · 11-27-01, 03:12 AM

My 3dprophet ii mx is clocked stably at 205/210 (core/mem). I removed the heatsink that came with it, cut it in half and stuck the 2 pieces on the rams (with a 50mm fan). I put a blorb on the core.

Maximus Nickus · 11-27-01, 10:24 AM

Can you post any pics???

Whats the highest it will run @?

11-26-01, 04:41 PM	Thread Starter #1
trapper Member Join Date: Jun 2001 Location: EDINBURGH(The Capital City)	Hercules 3DPROPHET II MX Hercules 3DPROPHET II MX How overclockable is my card and do i use the util that is part of the setts if so whats reccommended rates as i turned the 2 sliders up to the max once and pc didn't boot ,,,,,,,,,cheerz guyz trapper Celeron cBo 600 @ 901 (100fsb) 1.90cv Elite Groups P6BXT-A+ board 2x64mb pc 100 1x128mb pc 100 Hercules 3DProphet II MX(nVIDIA chip) 8x4x32 r/rw *xCD (space filler just now as im on my 11th or 12th drive!!) 2xwdCaviars' =16.6gig soundblaster16 pci 1xamplified subwoofer&1x TEAC superwoofer 2x TEAC satellite tweeters(very loud )
	QUOTE Thanks

11-26-01, 05:00 PM	#2
Maximus Nickus Senior Shaman Join Date: Oct 2001 Location: Milton Keynes, U.K.	Could you be clearer with the details? What program are you using? And surely you meant it hung, not "it wouldn't boot" as the oc'ing doesn't activate until you enter windows. I had a Hercules 3D Prophet 2 mx 64mb, is was ok but when taking the crummy blue hsf off to oc it it broke (this happened twice!!!) I found them to be very delicate, although there are diff versions mine was like a square shape some are rectangles so these could be better. What are the default clock speeds? I could only get mine from 175 core to 210 (it was slower though!!!) and mem to 181 from 175!!! Thats why the core was slowing it down because MX's have limited bandwidth. Just be careful when you oc it though!!! Good Luck, Nick __________________ Lead Senior - Cooling Abit AT7 Max2 \| 2100+ @ 3200+ Dual Loop WaterCooling \| 0.1 C/W CPU Block In order to succeed, you must try. \| Avatar by Plague. Be calm, relax and the answer will come to you Folding at Home My Heatware Last edited by Maximus Nickus; 11-26-01 at 05:30 PM.
	QUOTE Thanks

11-27-01, 03:12 AM	#3
asmodean Senior Member Join Date: Mar 2001 Location: Finland	My 3dprophet ii mx is clocked stably at 205/210 (core/mem). I removed the heatsink that came with it, cut it in half and stuck the 2 pieces on the rams (with a 50mm fan). I put a blorb on the core. __________________ Folding@Home v3- use your spare CPU cycles for greater good
	QUOTE Thanks

11-27-01, 10:24 AM	#4
Maximus Nickus Senior Shaman Join Date: Oct 2001 Location: Milton Keynes, U.K.	Can you post any pics??? Whats the highest it will run @? __________________ Lead Senior - Cooling Abit AT7 Max2 \| 2100+ @ 3200+ Dual Loop WaterCooling \| 0.1 C/W CPU Block In order to succeed, you must try. \| Avatar by Plague. Be calm, relax and the answer will come to you Folding at Home My Heatware
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Hercules 3DPROPHET II MX

Internet Services

Website Development

Tech Hardware