3D prophet mods

two_dope2000 · 11-28-01, 07:41 PM

does anybody know any kind of volt mods and cooling mods for the 3D prophet 2 mx?

asmodean · 11-29-01, 02:59 AM

Here's what I did to mine:

Removed the OEM heatsink from the core and cut it in half.
Then I put some AS2 on the ram-chips and very small dabs of superglue in each of the ram-chips corner, after that I stuck the OEM heatsink cut-in-half on them with a 50mm fan - got 10MHz more out of the memories that way.

I also ordered a blord, but it was a licensed one and the plastic holders didn't align correctly with the holes in the card, so I put some AS2 & superglue on the core - got 5MHz more from core.

Looks nice, blue PCB & blue HSFs

11-28-01, 07:41 PM	Thread Starter #1
two_dope2000 Member Join Date: Aug 2001 Location: Michigan	3D prophet mods does anybody know any kind of volt mods and cooling mods for the 3D prophet 2 mx?
	QUOTE Thanks

11-29-01, 02:59 AM	#2
asmodean Senior Member Join Date: Mar 2001 Location: Finland	Here's what I did to mine: Removed the OEM heatsink from the core and cut it in half. Then I put some AS2 on the ram-chips and very small dabs of superglue in each of the ram-chips corner, after that I stuck the OEM heatsink cut-in-half on them with a 50mm fan - got 10MHz more out of the memories that way. I also ordered a blord, but it was a licensed one and the plastic holders didn't align correctly with the holes in the card, so I put some AS2 & superglue on the core - got 5MHz more from core. Looks nice, blue PCB & blue HSFs __________________ Folding@Home v3- use your spare CPU cycles for greater good
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

3D prophet mods

Internet Services

Website Development

Tech Hardware