Do these settings look close to the stock settings for this ram?
http://www.newegg.com/Product/Product.asp?Item=N82E16820146114
on a Asus p5w-dh deluxe /w Core2 Duo E6700
AI Overclocking: Manual
CPU Frequency: 334
DRAM Frequency: DDR2-1002mhz
Performance Mode: Auto
PCI Express Frequency: Auto
PCI Clock Sync Mode: Auto
Memory Voltage: 2.2v
CPU VCore Voltage: Auto
FSB Termination Voltage: Auto
MCH Chipset Voltage: Auto
ICH Chipset Voltage: Auto
Modify Ratio Support: Enable
--Ratio CMOS Setting: 8
Microcode Updation: Enable
Max CPUID Value Limit: Disable
Execute Disable Function: Enable
Enhanced C1 Control: Disable
CPU Internal Thermal Control: Auto
Virtualization Technology: Disable
Configure DRAM Timing by SPD: Disable
CAS#: 4
RAS Precharge#: 5
RAS to CAS#: 4
RAS Activeto Precharge#: 11
Write Recovery Time: 4
ECC Mode: Disable
Hyper Path 3: Disable
DRAM Throttling Threshold: Auto
Memory Remap Feature: Enable (Running 64-bit Linux)
I am not trying to do any fancy overclocking (yet). I am just trying to get my memory running at stock speeds. I want a really stable system for now.
With these settings the system posts as:
2.672ghz
PC2-8500
FSB 1337 p)
How do my settings look? Are they close to what the system should be if running this memory at stock speeds.
http://www.newegg.com/Product/Product.asp?Item=N82E16820146114
on a Asus p5w-dh deluxe /w Core2 Duo E6700
AI Overclocking: Manual
CPU Frequency: 334
DRAM Frequency: DDR2-1002mhz
Performance Mode: Auto
PCI Express Frequency: Auto
PCI Clock Sync Mode: Auto
Memory Voltage: 2.2v
CPU VCore Voltage: Auto
FSB Termination Voltage: Auto
MCH Chipset Voltage: Auto
ICH Chipset Voltage: Auto
Modify Ratio Support: Enable
--Ratio CMOS Setting: 8
Microcode Updation: Enable
Max CPUID Value Limit: Disable
Execute Disable Function: Enable
Enhanced C1 Control: Disable
CPU Internal Thermal Control: Auto
Virtualization Technology: Disable
Configure DRAM Timing by SPD: Disable
CAS#: 4
RAS Precharge#: 5
RAS to CAS#: 4
RAS Activeto Precharge#: 11
Write Recovery Time: 4
ECC Mode: Disable
Hyper Path 3: Disable
DRAM Throttling Threshold: Auto
Memory Remap Feature: Enable (Running 64-bit Linux)
I am not trying to do any fancy overclocking (yet). I am just trying to get my memory running at stock speeds. I want a really stable system for now.
With these settings the system posts as:
2.672ghz
PC2-8500
FSB 1337 p)
How do my settings look? Are they close to what the system should be if running this memory at stock speeds.