• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

GPU folding

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

nvidiaOCmaster

Member
Joined
Jan 27, 2006
Location
Chulak
ok guys, gotta Q about GPU folding. How many does it have to "Complete" before its done?

btw, First successful(I hope so) CPU WU on this system is @ 98% :attn:

Should it be taking like...2+ full days to complete a unit?
 
GPU? 100 'frames'
CPU WU on this system is @ 98%
....?? Are you just mixing subjects or did you mean to say GPU? Do you have a dual core system? Is the card in your sig the one running GPU? If so, that card shouldnt' be taking 2 days to complete....The GPU needs 1 CPU core to 'feed' it....
 
my CPU just finished one. Its dual core Pentium D 915 that just finished one. It took 2 and a half days.

GPU does 10 in about... 50 min. Ive not finished one on the card yet, I turn GPU folding on when I go to school and stuff like that.

How long until it starts another WU for the CPU?

lol yea my bad, im mixing topics
 
ok then, thanks for the clarification!
yeah, shouldnt take too long to start another CPU WU...just a min or two, with the SMP clients it seems to take longer.

What are you using to monitor the CPU client? EMIII comes with a "calculator" of sorts that you can figure out your points per day with...for the GPU, you can type 330 for points, 100 for frames and type in the times you are getting per frame!
 
im just using the no nonsense client. I run it in the background.

edit: I just closed the console process and it started the same thing agian, "Supervillin 03"

normal?
 
Last edited:
Save starting a new thread, Is it possible to run 2 instances of F@H on a dual core and still run the GPU client? Im not worried about the PC slowing down.
 
No. You cannot run two uniproc clients,....well you can, but the GPU client wont get anything done. The GPU needs one core to 'feed' it.
You could try SMP via VMWare, but in my opinion, I'd rather fold the GPU full speed and keep the other core busy with 1 uniprocessor client. I get about 900-1000 PPD on that one rig(in the sig) depending on the WU the uniproc client pulls.
 
ok, well I be in a situation here.

I set the GUI client up to fold during screen saver, but as soon as I clicked close, it opened the screen and started folding, even though I set it up as like 150 min until screen saver :confused:

Suggestions?

PPD means what? Hopefully not points per day, because ive only got 8xx points over a whole week.
 
that means something is wrong with my rig, doesn't it? If he is getting 1000 with that rig, I should get around the same right? (ATM Im running @ 3.7ghz)

:( Anyone know what it could be?

Congrats on page 5 dz :)
 
FAH Stats show you've got one processor running over the last 50 days, and have never turned in a GPU WU. You've turned in 9 WU in total, p1814, p1815, p2732, p2735 x 3, p3038, and p3039 x 2. That tells me you aren't GPU folding at all, not even EUEing them. What were you looking at that showed you doing 10 frames in 50 minutes with a X1900GT (a X1950 XTX @ 695 does them in about 5:40)?
No serious folder uses the screensaver. Set at 150 minutes, every time you touch the computer it stops folding for 2 1/2 hours. On top of that, you've only got one core of your cpu actually folding and the other sitting idle. If you get GPU folding going, you'll neeed the second core to "feed" the gpu.]

If you want worthwhile help, you're going to have to post copies of FAHlog.txt and client.cfg for both the cpu client and the GPU client.
 
I was looking at the console. Should it be working faster than that? Ive also only got the GPU running in a @ 1X. My 16X gives me ****, so I dont use it.

Here is my client

Code:
[settings]
username=nvidiaOCmaster
team=32
asknet=no
bigpackets=yes
machineid=1
local=3

[http]
active=no
host=localhost
port=8080
usereg=yes

This is my CPU log, I dont have a GPU one atm, I deleted everything when I started using the GUI client(which im not using anymore)


Code:
--- Opening Log file [March 1 03:07:30] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[03:07:31] - Ask before connecting: No
[03:07:31] - Use IE connection settings: Yes
[03:07:31] - User name: nvidiaOCmaster (Team 32)
[03:07:31] - User ID: 42BD9C483EB5F188
[03:07:31] - Machine ID: 1
[03:07:31] 
[03:07:31] Loaded queue successfully.
[03:07:31] + Benchmarking ...
[03:07:34] 
[03:07:34] + Processing work unit
[03:07:34] Core required: FahCore_78.exe
[03:07:34] Core found.
[03:07:34] Working on Unit 03 [March 1 03:07:34]
[03:07:34] + Working ...
[03:07:34] 
[03:07:34] *------------------------------*
[03:07:34] Folding@Home Gromacs Core
[03:07:34] Version 1.90 (March 8, 2006)
[03:07:34] 
[03:07:34] Preparing to commence simulation
[03:07:34] - Looking at optimizations...
[03:07:35] - Files status OK
[03:07:35] - Expanded 291599 -> 1461493 (decompressed 501.1 percent)
[03:07:36] 
[03:07:36] Project: 3039 (Run 9, Clone 606, Gen 10)
[03:07:36] 
[03:07:37] Assembly optimizations on if available.
[03:07:37] Entering M.D.
[03:07:58] (Starting from checkpoint)
[03:07:58] Protein: p3039_supervillin-03
[03:07:58] 
[03:07:59] Writing local files
[03:08:00] Completed 2629860 out of 5000000 steps  (53)
[03:08:00] Extra SSE boost OK.
[03:10:36] CoreStatus = 1 (1)
[03:10:36] Client-core communications error: ERROR 0x1
[03:10:36] Deleting current work unit & continuing...


--- Opening Log file [March 1 05:02:07] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[05:02:07] - Ask before connecting: No
[05:02:07] - Use IE connection settings: Yes
[05:02:07] - User name: nvidiaOCmaster (Team 32)
[05:02:07] - User ID: 42BD9C483EB5F188
[05:02:07] - Machine ID: 1
[05:02:07] 
[05:02:07] Loaded queue successfully.
[05:02:07] + Benchmarking ...
[05:02:10] 
[05:02:10] + Processing work unit
[05:02:10] Core required: FahCore_78.exe
[05:02:10] Core found.
[05:02:10] Working on Unit 03 [March 1 05:02:10]
[05:02:10] + Working ...
[05:02:11] 
[05:02:11] *------------------------------*
[05:02:11] Folding@Home Gromacs Core
[05:02:11] Version 1.90 (March 8, 2006)
[05:02:11] 
[05:02:11] Preparing to commence simulation
[05:02:11] - Ensuring status. Please wait.
[05:02:28] - Looking at optimizations...
[05:02:28] - Working with standard loops on this execution.
[05:02:28] - Previous termination of core was improper.
[05:02:28] - Files status OK
[05:02:29] - Expanded 291599 -> 1461493 (decompressed 501.1 percent)
[05:02:31] 
[05:02:31] Project: 3039 (Run 9, Clone 606, Gen 10)
[05:02:31] 
[05:02:33] Entering M.D.
[05:02:55] (Starting from checkpoint)
[05:02:55] Protein: p3039_supervillin-03
[05:02:55] 
[05:02:56] Writing local files
[05:02:57] Completed 2629860 out of 5000000 steps  (53)
[05:31:42] Writing local files
[05:31:42] Completed 2650000 out of 5000000 steps  (53)
[06:43:14] Writing local files
[06:43:14] Completed 2700000 out of 5000000 steps  (54)
[07:55:40] Writing local files
[07:55:40] Completed 2750000 out of 5000000 steps  (55)
[09:07:55] Writing local files
[09:07:55] Completed 2800000 out of 5000000 steps  (56)
[10:21:39] Writing local files
[10:21:39] Completed 2850000 out of 5000000 steps  (57)
[11:32:12] Writing local files
[11:32:12] Completed 2900000 out of 5000000 steps  (58)
[12:43:59] Writing local files
[12:43:59] Completed 2950000 out of 5000000 steps  (59)
[13:56:36] Writing local files
[13:56:36] Completed 3000000 out of 5000000 steps  (60)
[15:07:40] Writing local files
[15:07:40] Completed 3050000 out of 5000000 steps  (61)
[16:19:40] Writing local files
[16:19:40] Completed 3100000 out of 5000000 steps  (62)
[17:30:14] Writing local files
[17:30:14] Completed 3150000 out of 5000000 steps  (63)
[18:42:16] Writing local files
[18:42:16] Completed 3200000 out of 5000000 steps  (64)
[19:53:58] Writing local files
[19:53:58] Completed 3250000 out of 5000000 steps  (65)
[21:02:51] Writing local files
[21:02:51] Completed 3300000 out of 5000000 steps  (66)
[22:11:34] Writing local files
[22:11:34] Completed 3350000 out of 5000000 steps  (67)
[23:20:14] Writing local files
[23:20:14] Completed 3400000 out of 5000000 steps  (68)
[00:28:53] Writing local files
[00:28:53] Completed 3450000 out of 5000000 steps  (69)
[01:37:29] Writing local files
[01:37:29] Completed 3500000 out of 5000000 steps  (70)
[02:46:05] Writing local files
[02:46:05] Completed 3550000 out of 5000000 steps  (71)
[03:54:47] Writing local files
[03:54:47] Completed 3600000 out of 5000000 steps  (72)
[05:05:28] Writing local files
[05:05:28] Completed 3650000 out of 5000000 steps  (73)
[06:16:40] Writing local files
[06:16:40] Completed 3700000 out of 5000000 steps  (74)
[07:28:57] Writing local files
[07:28:57] Completed 3750000 out of 5000000 steps  (75)
[08:27:08] 
[08:27:08] Folding@home Core Shutdown: INTERRUPTED
[08:27:10] CoreStatus = 66 (102)
[08:27:10] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.


--- Opening Log file [March 2 08:28:10] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[08:28:10] - Ask before connecting: No
[08:28:10] - Use IE connection settings: Yes
[08:28:10] - User name: nvidiaOCmaster (Team 32)
[08:28:10] - User ID: 42BD9C483EB5F188
[08:28:10] - Machine ID: 1
[08:28:10] 
[08:28:10] Loaded queue successfully.
[08:28:10] + Benchmarking ...
[08:28:13] 
[08:28:13] + Processing work unit
[08:28:13] Core required: FahCore_78.exe
[08:28:13] Core found.
[08:28:13] Working on Unit 03 [March 2 08:28:13]
[08:28:13] + Working ...
[08:28:14] 
[08:28:14] *------------------------------*
[08:28:14] Folding@Home Gromacs Core
[08:28:14] Version 1.90 (March 8, 2006)
[08:28:14] 
[08:28:14] Preparing to commence simulation
[08:28:14] - Looking at optimizations...
[08:28:14] - Files status OK
[08:28:14] - Expanded 291599 -> 1461493 (decompressed 501.1 percent)
[08:28:15] 
[08:28:15] Project: 3039 (Run 9, Clone 606, Gen 10)
[08:28:15] 
[08:28:15] Assembly optimizations on if available.
[08:28:15] Entering M.D.
[08:28:36] (Starting from checkpoint)
[08:28:37] Protein: p3039_supervillin-03
[08:28:37] 
[08:28:37] Writing local files
[08:28:38] Completed 3781327 out of 5000000 steps  (76)
[08:28:39] Extra SSE boost OK.
[08:37:11] 
[08:37:11] Folding@home Core Shutdown: INTERRUPTED
[08:37:14] CoreStatus = 66 (102)
[08:37:14] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.


--- Opening Log file [March 2 08:38:28] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[08:38:28] - Ask before connecting: No
[08:38:28] - Use IE connection settings: Yes
[08:38:28] - User name: nvidiaOCmaster (Team 32)
[08:38:29] - User ID: 42BD9C483EB5F188
[08:38:29] - Machine ID: 1
[08:38:29] 
[08:38:29] Loaded queue successfully.
[08:38:29] + Benchmarking ...
[08:38:32] 
[08:38:32] + Processing work unit
[08:38:32] Core required: FahCore_78.exe
[08:38:32] Core found.
[08:38:32] Working on Unit 03 [March 2 08:38:32]
[08:38:32] + Working ...
[08:38:33] 
[08:38:33] *------------------------------*
[08:38:33] Folding@Home Gromacs Core
[08:38:33] Version 1.90 (March 8, 2006)
[08:38:33] 
[08:38:33] Preparing to commence simulation
[08:38:33] - Looking at optimizations...
[08:38:33] - Files status OK
[08:38:34] - Expanded 291599 -> 1461493 (decompressed 501.1 percent)
[08:38:35] 
[08:38:35] Project: 3039 (Run 9, Clone 606, Gen 10)
[08:38:35] 
[08:38:35] Assembly optimizations on if available.
[08:38:35] Entering M.D.
[08:38:57] (Starting from checkpoint)
[08:38:57] Protein: p3039_supervillin-03
[08:38:57] 
[08:38:57] Writing local files
[08:38:57] Completed 3781327 out of 5000000 steps  (76)
[08:38:57] Extra SSE boost OK.
[08:48:59] Writing local files
[08:49:00] Completed 3800000 out of 5000000 steps  (76)
[09:15:38] Writing local files
[09:15:38] Completed 3850000 out of 5000000 steps  (77)
[09:42:40] Writing local files
[09:42:40] Completed 3900000 out of 5000000 steps  (78)
[10:09:27] Writing local files
[10:09:27] Completed 3950000 out of 5000000 steps  (79)
[10:35:52] Writing local files
[10:35:52] Completed 4000000 out of 5000000 steps  (80)
[11:02:22] Writing local files
[11:02:22] Completed 4050000 out of 5000000 steps  (81)
[11:29:40] Writing local files
[11:29:40] Completed 4100000 out of 5000000 steps  (82)
[11:59:04] Writing local files
[11:59:04] Completed 4150000 out of 5000000 steps  (83)
[12:05:27] 
[12:05:27] Folding@home Core Shutdown: INTERRUPTED
[12:05:31] CoreStatus = 66 (102)
[12:05:31] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.


--- Opening Log file [March 2 13:38:55] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[13:38:56] - Ask before connecting: No
[13:38:56] - Use IE connection settings: Yes
[13:38:56] - User name: nvidiaOCmaster (Team 32)
[13:38:56] - User ID: 42BD9C483EB5F188
[13:38:56] - Machine ID: 1
[13:38:56] 
[13:38:56] Loaded queue successfully.
[13:38:56] + Benchmarking ...
[13:38:59] 
[13:38:59] + Processing work unit
[13:38:59] Core required: FahCore_78.exe
[13:38:59] Core found.
[13:38:59] Working on Unit 03 [March 2 13:38:59]
[13:38:59] + Working ...
[13:39:03] 
[13:39:03] *------------------------------*
[13:39:03] Folding@Home Gromacs Core
[13:39:03] Version 1.90 (March 8, 2006)
[13:39:03] 
[13:39:03] Preparing to commence simulation
[13:39:03] - Looking at optimizations...
[13:39:04] - Files status OK
[13:39:04] - Expanded 291599 -> 1461493 (decompressed 501.1 percent)
[13:39:05] 
[13:39:05] Project: 3039 (Run 9, Clone 606, Gen 10)
[13:39:05] 
[13:39:05] Assembly optimizations on if available.
[13:39:05] Entering M.D.
[13:39:26] (Starting from checkpoint)
[13:39:26] Protein: p3039_supervillin-03
[13:39:26] 
[13:39:26] Writing local files
[13:39:26] Completed 4150000 out of 5000000 steps  (83)
[13:39:26] Extra SSE boost OK.
[14:05:15] Writing local files
[14:05:15] Completed 4200000 out of 5000000 steps  (84)
[14:32:29] Writing local files
[14:32:29] Completed 4250000 out of 5000000 steps  (85)
[14:58:12] Writing local files
[14:58:12] Completed 4300000 out of 5000000 steps  (86)
[15:24:03] Writing local files
[15:24:03] Completed 4350000 out of 5000000 steps  (87)
[15:49:51] Writing local files
[15:49:51] Completed 4400000 out of 5000000 steps  (88)
[16:15:14] Writing local files
[16:15:14] Completed 4450000 out of 5000000 steps  (89)
[16:40:44] Writing local files
[16:40:44] Completed 4500000 out of 5000000 steps  (90)
[17:05:42] Writing local files
[17:05:42] Completed 4550000 out of 5000000 steps  (91)
[17:30:42] Writing local files
[17:30:42] Completed 4600000 out of 5000000 steps  (92)
[17:55:41] Writing local files
[17:55:41] Completed 4650000 out of 5000000 steps  (93)
[18:20:34] Writing local files
[18:20:34] Completed 4700000 out of 5000000 steps  (94)
[18:45:27] Writing local files
[18:45:27] Completed 4750000 out of 5000000 steps  (95)
[19:10:20] Writing local files
[19:10:20] Completed 4800000 out of 5000000 steps  (96)
[19:35:12] Writing local files
[19:35:12] Completed 4850000 out of 5000000 steps  (97)
[20:00:06] Writing local files
[20:00:06] Completed 4900000 out of 5000000 steps  (98)
[20:25:39] Writing local files
[20:25:39] Completed 4950000 out of 5000000 steps  (99)
[20:51:45] Writing local files
[20:51:45] Completed 5000000 out of 5000000 steps  (100)
[20:51:45] Writing final coordinates.
[20:51:45] Past main M.D. loop
[20:52:45] 
[20:52:45] Finished Work Unit:
[20:52:45] - Reading up to 232536 from "work/wudata_03.arc": Read 232536
[20:52:45] - Reading up to 455276 from "work/wudata_03.xtc": Read 455276
[20:52:45] goefile size: 0
[20:52:45] logfile size: 262159
[20:52:45] Leaving Run
[20:52:46] - Writing 1148671 bytes of core data to disk...
[20:52:46]   ... Done.
[20:52:46] - Shutting down core
[20:52:46] 
[20:52:46] Folding@home Core Shutdown: FINISHED_UNIT
[20:52:48] CoreStatus = 64 (100)
[20:52:48] Sending work to server


[20:52:48] + Attempting to send results
[20:53:16] + Results successfully sent
[20:53:16] Thank you for your contribution to Folding@Home.
[20:53:16] + Number of Units Completed: 2

[20:53:20] - Preparing to get new work unit...
[20:53:20] + Attempting to get work packet
[20:53:20] - Connecting to assignment server
[20:53:21] - Successful: assigned to (171.65.103.160).
[20:53:21] + News From Folding@Home: Welcome to Folding@Home
[20:53:21] Loaded queue successfully.
[20:53:26] + Could not get Work unit data from Work Server
[20:53:26] - Error: Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[20:53:39] + Attempting to get work packet
[20:53:39] - Connecting to assignment server
[20:53:40] Couldn't send HTTP request to server (wininet)
[20:53:40] + Could not connect to Assignment Server
[20:53:40] - Successful: assigned to (171.65.103.160).
[20:53:40] + News From Folding@Home: Welcome to Folding@Home
[20:53:40] Loaded queue successfully.
[21:53:46] + Could not get Work unit data from Work Server
[21:53:46] - Error: Attempt #2  to get work failed, and no other work to do.
             Waiting before retry.
[21:54:00] + Attempting to get work packet
[21:54:00] - Connecting to assignment server
[21:54:01] Couldn't send HTTP request to server (wininet)
[21:54:01] + Could not connect to Assignment Server
[21:54:01] - Successful: assigned to (171.65.103.160).
[21:54:01] + News From Folding@Home: Welcome to Folding@Home
[21:54:01] Loaded queue successfully.


--- Opening Log file [March 2 22:50:13] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Executable: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe


[22:50:13] - Ask before connecting: No
[22:50:13] - Use IE connection settings: Yes
[22:50:13] - User name: nvidiaOCmaster (Team 32)
[22:50:13] - User ID: 42BD9C483EB5F188
[22:50:13] - Machine ID: 1
[22:50:13] 
[22:50:13] Loaded queue successfully.
[22:50:13] + Benchmarking ...
[22:50:16] - Preparing to get new work unit...
[22:50:16] + Attempting to get work packet
[22:50:16] - Connecting to assignment server
[22:50:17] - Successful: assigned to (171.65.103.160).
[22:50:17] + News From Folding@Home: Welcome to Folding@Home
[22:50:17] Loaded queue successfully.
[22:50:27] + Closed connections
[22:50:27] 
[22:50:27] + Processing work unit
[22:50:27] Core required: FahCore_78.exe
[22:50:27] Core found.
[22:50:27] Working on Unit 04 [March 2 22:50:27]
[22:50:27] + Working ...
[22:50:28] 
[22:50:28] *------------------------------*
[22:50:28] Folding@Home Gromacs Core
[22:50:28] Version 1.90 (March 8, 2006)
[22:50:28] 
[22:50:28] Preparing to commence simulation
[22:50:28] - Looking at optimizations...
[22:50:28] - Created dyn
[22:50:28] - Files status OK
[22:50:28] - Expanded 291097 -> 1461493 (decompressed 502.0 percent)
[22:50:28] - Starting from initial work packet
[22:50:28] 
[22:50:28] Project: 3038 (Run 3, Clone 955, Gen 6)
[22:50:28] 
[22:50:28] Assembly optimizations on if available.
[22:50:28] Entering M.D.
[22:50:34] Protein: p3038_supervillin-03
[22:50:34] 
[22:50:34] Writing local files
[22:50:34] Extra SSE boost OK.
[22:50:34] Writing local files
[22:50:35] Completed 0 out of 5000000 steps  (0)
[23:17:21] Writing local files
[23:17:21] Completed 50000 out of 5000000 steps  (1)
[23:43:58] Writing local files
[23:43:58] Completed 100000 out of 5000000 steps  (2)
[00:10:43] Writing local files
[00:10:43] Completed 150000 out of 5000000 steps  (3)
[00:37:01] Writing local files
[00:37:01] Completed 200000 out of 5000000 steps  (4)
[01:03:26] Writing local files
[01:03:26] Completed 250000 out of 5000000 steps  (5)
[01:29:42] Writing local files
[01:29:42] Completed 300000 out of 5000000 steps  (6)
[01:55:40] Writing local files
[01:55:40] Completed 350000 out of 5000000 steps  (7)

Folding@Home Client Shutdown.
[02:14:50] 


--- Opening Log file [March 3 02:20:02] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[02:20:02] - Ask before connecting: No
[02:20:02] - Use IE connection settings: Yes
[02:20:02] - User name: nvidiaOCmaster (Team 32)
[02:20:02] - User ID: 42BD9C483EB5F188
[02:20:02] - Machine ID: 1
[02:20:02] 
[02:20:02] Loaded queue successfully.
[02:20:02] + Benchmarking ...
[02:20:05] 
[02:20:05] + Processing work unit
[02:20:05] Core required: FahCore_78.exe
[02:20:05] Core found.
[02:20:05] Working on Unit 04 [March 3 02:20:05]
[02:20:05] + Working ...
[02:20:05] 
[02:20:05] *------------------------------*
[02:20:05] Folding@Home Gromacs Core
[02:20:05] Version 1.90 (March 8, 2006)
[02:20:05] 
[02:20:05] Preparing to commence simulation
[02:20:05] - Looking at optimizations...
[02:20:05] - Files status OK
[02:20:06] - Expanded 291097 -> 1461493 (decompressed 502.0 percent)
[02:20:06] 
[02:20:06] Project: 3038 (Run 3, Clone 955, Gen 6)
[02:20:06] 
[02:20:06] Assembly optimizations on if available.
[02:20:06] Entering M.D.
[02:20:27] (Starting from checkpoint)
[02:20:27] Protein: p3038_supervillin-03
[02:20:27] 
[02:20:27] Writing local files
[02:20:27] Completed 380509 out of 5000000 steps  (8)
[02:20:27] Extra SSE boost OK.
[02:25:23] 
[02:25:23] Folding@home Core Shutdown: INTERRUPTED
[02:25:26] CoreStatus = 66 (102)
[02:25:26] + Shutdown requested by user. Exiting.
Folding@Home Client Shutdown.


--- Opening Log file [March 3 02:26:28] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[02:26:28] - Ask before connecting: No
[02:26:28] - Use IE connection settings: Yes
[02:26:28] - User name: nvidiaOCmaster (Team 32)
[02:26:28] - User ID: 42BD9C483EB5F188
[02:26:28] - Machine ID: 1
[02:26:28] 
[02:26:29] Loaded queue successfully.
[02:26:29] + Benchmarking ...
[02:26:32] 
[02:26:32] + Processing work unit
[02:26:32] Core required: FahCore_78.exe
[02:26:32] Core found.
[02:26:32] Working on Unit 04 [March 3 02:26:32]
[02:26:32] + Working ...
[02:26:34] 
[02:26:34] *------------------------------*
[02:26:34] Folding@Home Gromacs Core
[02:26:34] Version 1.90 (March 8, 2006)
[02:26:34] 
[02:26:34] Preparing to commence simulation
[02:26:34] - Looking at optimizations...
[02:26:34] - Files status OK
[02:26:34] - Expanded 291097 -> 1461493 (decompressed 502.0 percent)
[02:26:34] 
[02:26:34] Project: 3038 (Run 3, Clone 955, Gen 6)
[02:26:34] 
[02:26:35] Assembly optimizations on if available.
[02:26:35] Entering M.D.
[02:26:55] (Starting from checkpoint)
[02:26:55] Protein: p3038_supervillin-03
[02:26:55] 
[02:26:55] Writing local files
[02:26:55] Completed 380509 out of 5000000 steps  (8)
[02:26:55] Extra SSE boost OK.
[02:37:08] Writing local files
[02:37:08] Completed 400000 out of 5000000 steps  (8)
[03:02:55] Writing local files
[03:02:55] Completed 450000 out of 5000000 steps  (9)
[03:28:55] Writing local files
[03:28:56] Completed 500000 out of 5000000 steps  (10)
[03:55:16] Writing local files
[03:55:16] Completed 550000 out of 5000000 steps  (11)
[04:21:42] Writing local files
[04:21:42] Completed 600000 out of 5000000 steps  (12)
[04:48:14] Writing local files
[04:48:14] Completed 650000 out of 5000000 steps  (13)
[05:14:46] Writing local files
[05:14:46] Completed 700000 out of 5000000 steps  (14)
[05:41:02] Writing local files
[05:41:02] Completed 750000 out of 5000000 steps  (15)
[06:06:29] Writing local files
[06:06:29] Completed 800000 out of 5000000 steps  (16)
[06:31:51] Writing local files
[06:31:51] Completed 850000 out of 5000000 steps  (17)
[06:57:14] Writing local files
[06:57:14] Completed 900000 out of 5000000 steps  (18)
[07:22:36] Writing local files
[07:22:36] Completed 950000 out of 5000000 steps  (19)
[07:47:59] Writing local files
[07:47:59] Completed 1000000 out of 5000000 steps  (20)
[08:13:23] Writing local files
[08:13:23] Completed 1050000 out of 5000000 steps  (21)
[08:38:45] Writing local files
[08:38:45] Completed 1100000 out of 5000000 steps  (22)
[09:04:02] Writing local files
[09:04:02] Completed 1150000 out of 5000000 steps  (23)
[09:29:19] Writing local files
[09:29:19] Completed 1200000 out of 5000000 steps  (24)
[09:54:39] Writing local files
[09:54:40] Completed 1250000 out of 5000000 steps  (25)
[10:20:03] Writing local files
[10:20:03] Completed 1300000 out of 5000000 steps  (26)
[10:45:26] Writing local files
[10:45:26] Completed 1350000 out of 5000000 steps  (27)
[11:10:49] Writing local files
[11:10:49] Completed 1400000 out of 5000000 steps  (28)
[11:36:14] Writing local files
[11:36:14] Completed 1450000 out of 5000000 steps  (29)
[12:01:40] Writing local files
[12:01:40] Completed 1500000 out of 5000000 steps  (30)
[12:27:03] Writing local files
[12:27:03] Completed 1550000 out of 5000000 steps  (31)
[12:52:25] Writing local files
[12:52:25] Completed 1600000 out of 5000000 steps  (32)
[13:17:49] Writing local files
[13:17:49] Completed 1650000 out of 5000000 steps  (33)
[13:43:15] Writing local files
[13:43:15] Completed 1700000 out of 5000000 steps  (34)
[14:08:38] Writing local files
[14:08:39] Completed 1750000 out of 5000000 steps  (35)
[14:34:02] Writing local files
[14:34:02] Completed 1800000 out of 5000000 steps  (36)
[14:59:25] Writing local files
[14:59:25] Completed 1850000 out of 5000000 steps  (37)
[15:24:44] Writing local files
[15:24:44] Completed 1900000 out of 5000000 steps  (38)
[15:50:03] Writing local files
[15:50:03] Completed 1950000 out of 5000000 steps  (39)
[16:15:37] Writing local files
[16:15:37] Completed 2000000 out of 5000000 steps  (40)
[16:41:49] Writing local files
[16:41:49] Completed 2050000 out of 5000000 steps  (41)
[17:08:38] Writing local files
[17:08:39] Completed 2100000 out of 5000000 steps  (42)
[17:35:14] Writing local files
[17:35:14] Completed 2150000 out of 5000000 steps  (43)
[18:01:50] Writing local files
[18:01:50] Completed 2200000 out of 5000000 steps  (44)
[18:28:08] Writing local files
[18:28:08] Completed 2250000 out of 5000000 steps  (45)
[18:53:50] Writing local files
[18:53:50] Completed 2300000 out of 5000000 steps  (46)
[19:19:22] Writing local files
[19:19:22] Completed 2350000 out of 5000000 steps  (47)
[19:45:06] Writing local files
[19:45:06] Completed 2400000 out of 5000000 steps  (48)
[20:11:32] Writing local files
[20:11:32] Completed 2450000 out of 5000000 steps  (49)
[20:38:02] Writing local files
[20:38:02] Completed 2500000 out of 5000000 steps  (50)
[21:04:14] Writing local files
[21:04:14] Completed 2550000 out of 5000000 steps  (51)
[21:30:32] Writing local files
[21:30:32] Completed 2600000 out of 5000000 steps  (52)
[21:57:57] Writing local files
[21:57:57] Completed 2650000 out of 5000000 steps  (53)
[22:24:04] Writing local files
[22:24:04] Completed 2700000 out of 5000000 steps  (54)
[22:50:19] Writing local files
[22:50:19] Completed 2750000 out of 5000000 steps  (55)
[23:16:30] Writing local files
[23:16:30] Completed 2800000 out of 5000000 steps  (56)
[23:42:56] Writing local files
[23:42:56] Completed 2850000 out of 5000000 steps  (57)
[00:08:24] Writing local files
[00:08:24] Completed 2900000 out of 5000000 steps  (58)
[00:34:41] Writing local files
[00:34:41] Completed 2950000 out of 5000000 steps  (59)
[01:01:27] Writing local files
[01:01:27] Completed 3000000 out of 5000000 steps  (60)
[01:27:57] Writing local files
[01:27:57] Completed 3050000 out of 5000000 steps  (61)
[01:54:11] Writing local files
[01:54:11] Completed 3100000 out of 5000000 steps  (62)
[02:20:17] Writing local files
[02:20:17] Completed 3150000 out of 5000000 steps  (63)
[02:46:25] Writing local files
[02:46:25] Completed 3200000 out of 5000000 steps  (64)
[03:13:02] Writing local files
[03:13:02] Completed 3250000 out of 5000000 steps  (65)
[03:39:51] Writing local files
[03:39:51] Completed 3300000 out of 5000000 steps  (66)
[04:06:33] Writing local files
[04:06:33] Completed 3350000 out of 5000000 steps  (67)
[04:34:06] Writing local files
[04:34:06] Completed 3400000 out of 5000000 steps  (68)
[05:00:31] Writing local files
[05:00:31] Completed 3450000 out of 5000000 steps  (69)
[05:27:07] Writing local files
[05:27:07] Completed 3500000 out of 5000000 steps  (70)
[05:54:08] Writing local files
[05:54:08] Completed 3550000 out of 5000000 steps  (71)
[06:21:32] Writing local files
[06:21:32] Completed 3600000 out of 5000000 steps  (72)
[06:48:35] Writing local files
[06:48:35] Completed 3650000 out of 5000000 steps  (73)
[07:15:04] Writing local files
[07:15:04] Completed 3700000 out of 5000000 steps  (74)
[07:42:28] Writing local files
[07:42:28] Completed 3750000 out of 5000000 steps  (75)
[08:09:28] Writing local files
[08:09:28] Completed 3800000 out of 5000000 steps  (76)
[08:36:49] Writing local files
[08:36:49] Completed 3850000 out of 5000000 steps  (77)
[09:03:41] Writing local files
[09:03:41] Completed 3900000 out of 5000000 steps  (78)
[09:30:28] Writing local files
[09:30:28] Completed 3950000 out of 5000000 steps  (79)
[09:56:18] Writing local files
[09:56:18] Completed 4000000 out of 5000000 steps  (80)
[10:22:58] Writing local files
[10:22:58] Completed 4050000 out of 5000000 steps  (81)
[10:49:39] Writing local files
[10:49:39] Completed 4100000 out of 5000000 steps  (82)
[11:16:20] Writing local files
[11:16:20] Completed 4150000 out of 5000000 steps  (83)
[11:42:34] Writing local files
[11:42:34] Completed 4200000 out of 5000000 steps  (84)
[12:08:32] Writing local files
[12:08:32] Completed 4250000 out of 5000000 steps  (85)
[12:35:06] Writing local files
[12:35:06] Completed 4300000 out of 5000000 steps  (86)
[13:01:44] Writing local files
[13:01:44] Completed 4350000 out of 5000000 steps  (87)
[13:28:09] Writing local files
[13:28:09] Completed 4400000 out of 5000000 steps  (88)
[13:53:43] Writing local files
[13:53:43] Completed 4450000 out of 5000000 steps  (89)
[14:19:21] Writing local files
[14:19:21] Completed 4500000 out of 5000000 steps  (90)
[14:44:51] Writing local files
[14:44:51] Completed 4550000 out of 5000000 steps  (91)
[15:11:00] Writing local files
[15:11:00] Completed 4600000 out of 5000000 steps  (92)
[15:37:42] Writing local files
[15:37:42] Completed 4650000 out of 5000000 steps  (93)
[16:04:29] Writing local files
[16:04:29] Completed 4700000 out of 5000000 steps  (94)
[16:31:38] Writing local files
[16:31:38] Completed 4750000 out of 5000000 steps  (95)
[16:58:56] Writing local files
[16:58:56] Completed 4800000 out of 5000000 steps  (96)
[17:24:58] Writing local files
[17:24:58] Completed 4850000 out of 5000000 steps  (97)
[17:51:07] Writing local files
[17:51:07] Completed 4900000 out of 5000000 steps  (98)
[18:17:16] Writing local files
[18:17:16] Completed 4950000 out of 5000000 steps  (99)
[18:43:19] Writing local files
[18:43:19] Completed 5000000 out of 5000000 steps  (100)
[18:43:19] Writing final coordinates.
[18:43:19] Past main M.D. loop
[18:44:19] 
[18:44:19] Finished Work Unit:
[18:44:19] - Reading up to 232536 from "work/wudata_04.arc": Read 232536
[18:44:19] - Reading up to 453528 from "work/wudata_04.xtc": Read 453528
[18:44:19] goefile size: 0
[18:44:19] logfile size: 264596
[18:44:19] Leaving Run
[18:44:20] - Writing 1148384 bytes of core data to disk...
[18:44:20]   ... Done.
[18:44:20] - Shutting down core
[18:44:20] 
[18:44:20] Folding@home Core Shutdown: FINISHED_UNIT
[18:44:23] CoreStatus = 64 (100)
[18:44:23] Sending work to server


[18:44:23] + Attempting to send results
[18:45:02] + Results successfully sent
[18:45:02] Thank you for your contribution to Folding@Home.
[18:45:02] + Number of Units Completed: 3

[18:45:06] - Preparing to get new work unit...
[18:45:06] + Attempting to get work packet
[18:45:06] - Connecting to assignment server
[18:45:07] - Successful: assigned to (171.65.103.160).
[18:45:07] + News From Folding@Home: Welcome to Folding@Home
[18:45:07] Loaded queue successfully.
[18:45:20] + Could not get Work unit data from Work Server
[18:45:20] - Error: Attempt #1  to get work failed, and no other work to do.
             Waiting before retry.
[18:45:36] + Attempting to get work packet
[18:45:36] - Connecting to assignment server
[18:45:36] Couldn't send HTTP request to server (wininet)
[18:45:36] + Could not connect to Assignment Server
[18:45:37] - Successful: assigned to (171.65.103.160).
[18:45:37] + News From Folding@Home: Welcome to Folding@Home
[18:45:37] Loaded queue successfully.
[18:45:52] + Could not get Work unit data from Work Server
[18:45:52] - Error: Attempt #2  to get work failed, and no other work to do.
             Waiting before retry.
[18:46:12] + Attempting to get work packet
[18:46:12] - Connecting to assignment server


--- Opening Log file [March 4 19:06:57] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Executable: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe


[19:06:57] - Ask before connecting: No
[19:06:57] - Use IE connection settings: Yes
[19:06:57] - User name: nvidiaOCmaster (Team 32)
[19:06:57] - User ID: 42BD9C483EB5F188
[19:06:57] - Machine ID: 1
[19:06:57] 
[19:06:57] Loaded queue successfully.
[19:06:57] + Benchmarking ...
[19:07:00] - Preparing to get new work unit...
[19:07:00] + Attempting to get work packet
[19:07:00] - Connecting to assignment server
[19:07:01] - Successful: assigned to (171.65.103.160).
[19:07:01] + News From Folding@Home: Welcome to Folding@Home
[19:07:01] Loaded queue successfully.
[19:07:14] + Closed connections
[19:07:14] 
[19:07:14] + Processing work unit
[19:07:14] Core required: FahCore_78.exe
[19:07:14] Core found.
[19:07:14] Working on Unit 05 [March 4 19:07:14]
[19:07:14] + Working ...
[19:07:14] 
[19:07:14] *------------------------------*
[19:07:14] Folding@Home Gromacs Core
[19:07:14] Version 1.90 (March 8, 2006)
[19:07:14] 
[19:07:14] Preparing to commence simulation
[19:07:14] - Looking at optimizations...
[19:07:14] - Created dyn
[19:07:14] - Files status OK
[19:07:15] - Expanded 291542 -> 1461493 (decompressed 501.2 percent)
[19:07:15] - Starting from initial work packet
[19:07:15] 
[19:07:15] Project: 3039 (Run 7, Clone 67, Gen 7)
[19:07:15] 
[19:07:15] Assembly optimizations on if available.
[19:07:15] Entering M.D.
[19:07:21] Protein: p3039_supervillin-03
[19:07:21] 
[19:07:21] Writing local files
[19:07:21] Extra SSE boost OK.
[19:07:21] Writing local files
[19:07:21] Completed 0 out of 5000000 steps  (0)
[19:33:58] Writing local files
[19:33:58] Completed 50000 out of 5000000 steps  (1)

Folding@Home Client Shutdown.


--- Opening Log file [March 4 23:12:24] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Executable: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe


[23:12:24] - Ask before connecting: No
[23:12:24] - Use IE connection settings: Yes
[23:12:24] - User name: nvidiaOCmaster (Team 32)
[23:12:24] - User ID: 42BD9C483EB5F188
[23:12:24] - Machine ID: 1
[23:12:24] 
[23:12:25] Loaded queue successfully.
[23:12:25] + Benchmarking ...
[23:12:27] 
[23:12:27] + Processing work unit
[23:12:27] Core required: FahCore_78.exe
[23:12:27] Core found.
[23:12:27] Working on Unit 05 [March 4 23:12:27]
[23:12:27] + Working ...
[23:12:28] 
[23:12:28] *------------------------------*
[23:12:28] Folding@Home Gromacs Core
[23:12:28] Version 1.90 (March 8, 2006)
[23:12:28] 
[23:12:28] Preparing to commence simulation
[23:12:28] - Looking at optimizations...
[23:12:28] - Files status OK
[23:12:28] - Expanded 291542 -> 1461493 (decompressed 501.2 percent)
[23:12:28] 
[23:12:28] Project: 3039 (Run 7, Clone 67, Gen 7)
[23:12:28] 
[23:12:28] Assembly optimizations on if available.
[23:12:28] Entering M.D.
[23:12:49] (Starting from checkpoint)
[23:12:49] Protein: p3039_supervillin-03
[23:12:49] 
[23:12:49] Writing local files
[23:12:49] Completed 50000 out of 5000000 steps  (1)
[23:12:49] Extra SSE boost OK.
[23:38:51] Writing local files
[23:38:51] Completed 100000 out of 5000000 steps  (2)
[00:05:11] Writing local files
[00:05:11] Completed 150000 out of 5000000 steps  (3)
[00:32:07] Writing local files
[00:32:07] Completed 200000 out of 5000000 steps  (4)
[00:59:06] Writing local files
[00:59:06] Completed 250000 out of 5000000 steps  (5)
[01:25:51] Writing local files
[01:25:51] Completed 300000 out of 5000000 steps  (6)
[01:52:08] Writing local files
[01:52:08] Completed 350000 out of 5000000 steps  (7)
[02:17:57] Writing local files
[02:17:57] Completed 400000 out of 5000000 steps  (8)
[02:43:30] Writing local files
[02:43:30] Completed 450000 out of 5000000 steps  (9)
[03:09:03] Writing local files
[03:09:03] Completed 500000 out of 5000000 steps  (10)
[03:34:33] Writing local files
[03:34:33] Completed 550000 out of 5000000 steps  (11)
[04:00:01] Writing local files
[04:00:01] Completed 600000 out of 5000000 steps  (12)
[04:25:29] Writing local files
[04:25:29] Completed 650000 out of 5000000 steps  (13)
[04:51:01] Writing local files
[04:51:01] Completed 700000 out of 5000000 steps  (14)
[05:16:33] Writing local files
[05:16:33] Completed 750000 out of 5000000 steps  (15)
[05:42:08] Writing local files
[05:42:08] Completed 800000 out of 5000000 steps  (16)
[06:07:41] Writing local files
[06:07:41] Completed 850000 out of 5000000 steps  (17)
[06:33:13] Writing local files
[06:33:13] Completed 900000 out of 5000000 steps  (18)
[06:58:45] Writing local files
[06:58:45] Completed 950000 out of 5000000 steps  (19)
[07:24:17] Writing local files
[07:24:17] Completed 1000000 out of 5000000 steps  (20)
[07:49:47] Writing local files
[07:49:47] Completed 1050000 out of 5000000 steps  (21)
[08:15:16] Writing local files
[08:15:16] Completed 1100000 out of 5000000 steps  (22)
[08:40:45] Writing local files
[08:40:45] Completed 1150000 out of 5000000 steps  (23)
[09:06:16] Writing local files
[09:06:16] Completed 1200000 out of 5000000 steps  (24)
[09:31:48] Writing local files
[09:31:48] Completed 1250000 out of 5000000 steps  (25)
[09:57:21] Writing local files
[09:57:21] Completed 1300000 out of 5000000 steps  (26)
[10:22:54] Writing local files
[10:22:54] Completed 1350000 out of 5000000 steps  (27)
[10:48:28] Writing local files
[10:48:28] Completed 1400000 out of 5000000 steps  (28)
[11:14:04] Writing local files
[11:14:04] Completed 1450000 out of 5000000 steps  (29)
[11:39:38] Writing local files
[11:39:38] Completed 1500000 out of 5000000 steps  (30)
[12:05:09] Writing local files
[12:05:09] Completed 1550000 out of 5000000 steps  (31)
[12:31:16] Writing local files
[12:31:16] Completed 1600000 out of 5000000 steps  (32)
[12:57:50] Writing local files
[12:57:50] Completed 1650000 out of 5000000 steps  (33)
[13:24:25] Writing local files
[13:24:25] Completed 1700000 out of 5000000 steps  (34)
[13:51:18] Writing local files
[13:51:18] Completed 1750000 out of 5000000 steps  (35)
[14:17:57] Writing local files
[14:17:57] Completed 1800000 out of 5000000 steps  (36)

Folding@Home Client Shutdown.


--- Opening Log file [March 5 14:50:36] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[14:50:36] - Ask before connecting: No
[14:50:36] - Use IE connection settings: Yes
[14:50:36] - User name: nvidiaOCmaster (Team 32)
[14:50:36] - User ID: 42BD9C483EB5F188
[14:50:36] - Machine ID: 1
[14:50:36] 
[14:50:37] Loaded queue successfully.
[14:50:37] + Benchmarking ...
[14:50:39] 
[14:50:39] + Processing work unit
[14:50:39] Core required: FahCore_78.exe
[14:50:39] Core found.
[14:50:40] Working on Unit 05 [March 5 14:50:40]
[14:50:40] + Working ...
[14:50:43] 
[14:50:43] *------------------------------*
[14:50:43] Folding@Home Gromacs Core
[14:50:43] Version 1.90 (March 8, 2006)
[14:50:43] 
[14:50:43] Preparing to commence simulation
[14:50:43] - Looking at optimizations...
[14:50:44] - Files status OK
[14:50:45] - Expanded 291542 -> 1461493 (decompressed 501.2 percent)
[14:50:45] 
[14:50:45] Project: 3039 (Run 7, Clone 67, Gen 7)
[14:50:45] 
[14:50:46] Assembly optimizations on if available.
[14:50:46] Entering M.D.
[14:51:06] (Starting from checkpoint)
[14:51:06] Protein: p3039_supervillin-03
[14:51:06] 
[14:51:06] Writing local files
[14:51:06] Completed 1800000 out of 5000000 steps  (36)
[14:51:06] Extra SSE boost OK.


--- Opening Log file [March 5 15:08:29] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[15:08:29] - Ask before connecting: No
[15:08:29] - Use IE connection settings: Yes
[15:08:29] - User name: nvidiaOCmaster (Team 32)
[15:08:31] - User ID: 42BD9C483EB5F188
[15:08:31] - Machine ID: 1
[15:08:31] 
[15:08:31] Loaded queue successfully.
[15:08:31] + Benchmarking ...
[15:08:34] 
[15:08:34] + Processing work unit
[15:08:34] Core required: FahCore_78.exe
[15:08:34] Core found.
[15:08:34] Working on Unit 05 [March 5 15:08:34]
[15:08:34] + Working ...
[15:08:34] 
[15:08:34] *------------------------------*
[15:08:34] Folding@Home Gromacs Core
[15:08:34] Version 1.90 (March 8, 2006)
[15:08:34] 
[15:08:34] Preparing to commence simulation
[15:08:34] - Ensuring status. Please wait.
[15:08:51] - Looking at optimizations...
[15:08:51] - Working with standard loops on this execution.
[15:08:52] - Previous termination of core was improper.
[15:08:52] - Files status OK
[15:08:52] - Expanded 291542 -> 1461493 (decompressed 501.2 percent)
[15:08:53] 
[15:08:53] Project: 3039 (Run 7, Clone 67, Gen 7)
[15:08:53] 
[15:08:54] Entering M.D.
[15:09:14] (Starting from checkpoint)
[15:09:14] Protein: p3039_supervillin-03
[15:09:14] 
[15:09:14] Writing local files
[15:09:14] Completed 1800000 out of 5000000 steps  (36)


--- Opening Log file [March 5 15:22:51] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[15:22:51] - Ask before connecting: No
[15:22:51] - Use IE connection settings: Yes
[15:22:51] - User name: nvidiaOCmaster (Team 32)
[15:22:51] - User ID: 42BD9C483EB5F188
[15:22:51] - Machine ID: 1
[15:22:51] 
[15:22:51] Loaded queue successfully.
[15:22:51] + Benchmarking ...
[15:22:54] 
[15:22:54] + Processing work unit
[15:22:54] Core required: FahCore_78.exe
[15:22:54] Core found.
[15:22:54] Working on Unit 05 [March 5 15:22:54]
[15:22:54] + Working ...
[15:22:54] 
[15:22:54] *------------------------------*
[15:22:54] Folding@Home Gromacs Core
[15:22:54] Version 1.90 (March 8, 2006)
[15:22:54] 
[15:22:54] Preparing to commence simulation
[15:22:54] - Ensuring status. Please wait.
[15:23:11] - Looking at optimizations...
[15:23:11] - Working with standard loops on this execution.
[15:23:11] - Previous termination of core was improper.
[15:23:11] - Going to use standard loops.
[15:23:11] - Files status OK
[15:23:12] - Expanded 291542 -> 1461493 (decompressed 501.2 percent)
[15:23:12] 
[15:23:12] Project: 3039 (Run 7, Clone 67, Gen 7)
[15:23:12] 
[15:23:12] Entering M.D.
[15:23:33] (Starting from checkpoint)
[15:23:33] Protein: p3039_supervillin-03
[15:23:33] 
[15:23:33] Writing local files
[15:23:33] Completed 1800000 out of 5000000 steps  (36)


--- Opening Log file [March 5 15:53:54] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[15:53:54] - Ask before connecting: No
[15:53:54] - Use IE connection settings: Yes
[15:53:54] - User name: nvidiaOCmaster (Team 32)
[15:53:54] - User ID: 42BD9C483EB5F188
[15:53:54] - Machine ID: 1
[15:53:54] 
[15:53:54] Loaded queue successfully.
[15:53:54] + Benchmarking ...
[15:53:57] 
[15:53:57] + Processing work unit
[15:53:57] Core required: FahCore_78.exe
[15:53:57] Core found.
[15:53:57] Working on Unit 05 [March 5 15:53:57]
[15:53:57] + Working ...
[15:53:57] 
[15:53:57] *------------------------------*
[15:53:57] Folding@Home Gromacs Core
[15:53:57] Version 1.90 (March 8, 2006)
[15:53:57] 
[15:53:57] Preparing to commence simulation
[15:53:57] - Ensuring status. Please wait.
[15:54:14] - Looking at optimizations...
[15:54:14] - Working with standard loops on this execution.
[15:54:14] - Previous termination of core was improper.
[15:54:14] - Going to use standard loops.
[15:54:14] - Files status OK
[15:54:15] - Expanded 291542 -> 1461493 (decompressed 501.2 percent)
[15:54:15] 
[15:54:15] Project: 3039 (Run 7, Clone 67, Gen 7)
[15:54:15] 
[15:54:17] Entering M.D.
[15:54:37] (Starting from checkpoint)
[15:54:37] Protein: p3039_supervillin-03
[15:54:37] 
[15:54:37] Writing local files
[15:54:37] Completed 1810120 out of 5000000 steps  (36)
[16:53:05] Writing local files
[16:53:05] Completed 1850000 out of 5000000 steps  (37)
[18:04:47] Writing local files
[18:04:47] Completed 1900000 out of 5000000 steps  (38)
[19:16:21] Writing local files
[19:16:21] Completed 1950000 out of 5000000 steps  (39)
[20:28:40] Writing local files
[20:28:40] Completed 2000000 out of 5000000 steps  (40)
[21:39:52] Writing local files
[21:39:52] Completed 2050000 out of 5000000 steps  (41)
[22:52:24] Writing local files
[22:52:24] Completed 2100000 out of 5000000 steps  (42)
[00:04:49] Writing local files
[00:04:49] Completed 2150000 out of 5000000 steps  (43)


--- Opening Log file [March 6 00:35:00] 


# Windows Console Edition #####################################################
###############################################################################

                       Folding@Home Client Version 5.04beta

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: C:\Documents and Settings\Skeet\Desktop\F@H
Service: C:\Documents and Settings\Skeet\Desktop\F@H\FAH504-Console.exe
Arguments: -svcstart 

Launched as a service.
Entered C:\Documents and Settings\Skeet\Desktop\F@H to do work.

[00:35:00] - Ask before connecting: No
[00:35:00] - Use IE connection settings: Yes
[00:35:00] - User name: nvidiaOCmaster (Team 32)
[00:35:00] - User ID: 42BD9C483EB5F188
[00:35:00] - Machine ID: 1
[00:35:00] 

A potential conflict was detected:

[B]Process 152 is currently running and may also be a client with Mach. ID 1.
Program will now exit. Upon restart, this check will not be done -- 
you may wish to check that no client is currently running in
C:\Documents and Settings\Skeet\Desktop\F@H before restarting.
[/B]

Yes, there are quite a few stops, I turn it off when I do certain things that require alot of CPU power, but I turn it on shortly after. Im also having some stability problems with my CPU.

What does that thing I put in bold mean? Does that have to do with attempting to run the GPU GUI client?
 
(Pressing edit takes like 2 min)

Also, why do I need to shut it down and re-open it for it to start another WU?
 
.......OK.
1. What clients are you running
2. What clients do you have installed
3. What FAH Processes are running under Task Manager
4. What do you WANT running?
 
1: F@H504-console

2:nothing is "Installed"

3: F@H console, and core 78

4: When I have to shutdown the core?
 
you have only 1 Uni-processor Instance, and you only want one uni-processor instance running?
*That error message you had in bold ment you have multiple clients running with the same machine ID....
 
First: No GPU log = No GPU folding.

Second: With only half your CPU dedicated to folding, why do you need to turn FAH off when you need all the CPU power? In any event, FAH gives up all cpu cycles to any process with a higher priority and runs by default at priority 0, meaing all other processes are higher.

Third: The conflict message is the result of an improper shutdown of the client. Power failures and system hangs due to instability are the most common cause.

Forth: You're making 80ppd on a machine capable of 290 ppd on 2 instances of normal gromacs cpu WUs or 550ppd on 1 CPU + 1 GPU instance.

Fifth: You're using IE settings which will cause connectivity problems if used with IE7, perhaps causing you to have to close and reopen the client to download a new WU. In config, the answer to "use IE settings?" and "use proxy?" should both be no.

Sixth: The X1900 GT should do WUs at a rate of about 10 minutes/frame at 3D clocks, 12:00/frame at 2D clocks. 5:00/frame on the GT isn't possible.

Seventh: Your machine is completing p3039 at a rate of about 25:30 per frame, 105 ppd. Running at 3.7 GHz it should make 144ppd/instance. What does task manager show eating cpu time?
 
I set the GUI client up to fold during screen saver

I have a feeling that there are other applications and things going on that are stopping the F@H client from running.

Also, do you have two shortcuts and are trying to run two instances of F@H from the same directory? In your log, I am seeing that the application is started as a service, then I see it started as an application shortly after.
 
Thank you for making me look at my processes chasr, for some reason, AIM is using 40% of my CPU power. btw, Im back at 3.0ghz, I don't want to pump 1.6V through my CPU daily.

I am going to change it to no on the proxy and IE things.

Im going to ditch the screensaver thing and get my GPU folding 24/7. :attn:

Sorry if I didn't get all you're concerns attended to, im in a rush to get to lunch, Ill go back through them when I get back home.

im ran the GPU one and CPU one from the same folder, but GPU has its own sub.
 
Back