Notices

Overclockers Forums > Hardware > Cooling > Water Cooling
Water Cooling Discussion devoted to blocks, pumps, radiators, reservoirs, tubing, and everything else to get you running smooth on a water loop
Forum Jump

Thermaltake Big Water 735

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 03-13-07, 06:59 PM Thread Starter   #1
chinky714
Member



Join Date: Jun 2005

 
Thermaltake Big Water 735


I just got the Thermaltake Big Water 735. Compusa was closing down, they have all heatsinks and water cooling kits at 30% off. The sticker price for the Bigwater was $149.99 but rang up at $97.99 - 30% so I ended up paying about $70 All i gotta say is, it's pretty good. For $100 its a real nice silent water cooling solution. Only thing that could use some improvements would be the radiator. Its an aluminum one, a copper radiator would be a nice touch and improve temps a bit. Right now on a C2D E6300 at 3.2GHz at 1.32V on a Gigabyte 965P S3 I'm idling at 37C full load using Intel TAT is 55C
chinky714 is offline   QUOTE Thanks
Old 03-13-07, 07:43 PM   #2
darkcow
Member

 
darkcow's Avatar 

Join Date: Jun 2006

 
good stuff. whats your load using orthos?

my friends brand new e6600 running at 1.3ish volts at that speed rings up at 47c (if i remember correctly) load. (stock cooler) interesting... i would think even though the volts are less on the e6600 the extra cache wouldn't count for that much of a decrease in temps.


but anyways, great price, for an ok kit.

__________________
EVGA 780i - P08 [ FSB:1.4v SPP:1.5v MCP:1.65v SPP<>MCP:1.4v ]
Q6600 G0 L747A [ 400x9:3.6ghz @ 1.43v - 445x9:4.0Ghz @ 1.55v ]
xFx GTX260 216 Black Edition [ GPU:740Mhz Shader:1515 Ram:1215Mhz ]
2x 1 GB - 2x 2 GB OCZ Reaper DDR2-800 4-4-4-12 [ 990Mhz ]
Win 7 Build 7600 - Arch Linux

Apogee GTZ - MCW60-R - 2xMCR320 - MCP655 - MasterKleer 7/16
7x yate loons - 2x Arctic fan 8

All in my wooden case
darkcow is offline   QUOTE Thanks
Old 03-13-07, 09:35 PM Thread Starter   #3
chinky714
Member



Join Date: Jun 2005

 
Quote:
Originally Posted by darkcow
good stuff. whats your load using orthos?

my friends brand new e6600 running at 1.3ish volts at that speed rings up at 47c (if i remember correctly) load. (stock cooler) interesting... i would think even though the volts are less on the e6600 the extra cache wouldn't count for that much of a decrease in temps.


but anyways, great price, for an ok kit.

the high temp is probably due to the recent hot spell we have here in california. Temperatures in the past 2 days were like 86 degrees, which makes my room pretty hot. Also my pc is basically silent, i only have 2 low rpm 80mm fans intaking air into the case. With load on orthos im getting only a 48-50C load temp. From what i remember Orthos doesn't really put a 100% stress on the cpu. Thats why i test for maximum heat with TAT. In a few days when the temps get cooler i will load test again to see what kind of temps i'll be getting.
chinky714 is offline   QUOTE Thanks
Old 03-14-07, 06:31 AM   #4
darkcow
Member

 
darkcow's Avatar 

Join Date: Jun 2006

 
orthos is your practicle max temp, theres no way in hell your temps are going to get to the temps of TAT ever in anyday use.


you have decent temps, im just thinking that a tuniq tower might do just as well, but since you got it for less than 100 bucks you should be happy.

__________________
EVGA 780i - P08 [ FSB:1.4v SPP:1.5v MCP:1.65v SPP<>MCP:1.4v ]
Q6600 G0 L747A [ 400x9:3.6ghz @ 1.43v - 445x9:4.0Ghz @ 1.55v ]
xFx GTX260 216 Black Edition [ GPU:740Mhz Shader:1515 Ram:1215Mhz ]
2x 1 GB - 2x 2 GB OCZ Reaper DDR2-800 4-4-4-12 [ 990Mhz ]
Win 7 Build 7600 - Arch Linux

Apogee GTZ - MCW60-R - 2xMCR320 - MCP655 - MasterKleer 7/16
7x yate loons - 2x Arctic fan 8

All in my wooden case
darkcow is offline   QUOTE Thanks
Old 03-14-07, 03:40 PM Thread Starter   #5
chinky714
Member



Join Date: Jun 2005

 
Quote:
Originally Posted by darkcow
orthos is your practicle max temp, theres no way in hell your temps are going to get to the temps of TAT ever in anyday use.


you have decent temps, im just thinking that a tuniq tower might do just as well, but since you got it for less than 100 bucks you should be happy.

heh tested today while the weather was still cool. On TAT it only went to 48C ran that temp for about 5 hours. Yeah im pretty happy. As this is such a cheap water cooling unit and it performs pretty decent. The only thing this has advantage over air cooling is it isn't affect by surrounding temperature as much. California has had some extremely hot summers lately. This will allow me to run the pc at safe temps during the summer season.
chinky714 is offline   QUOTE Thanks
Old 03-14-07, 05:59 PM   #6
darkcow
Member

 
darkcow's Avatar 

Join Date: Jun 2006

 
seems to be doing ok. probably performing a bit better than high end air. but i doubt by much.

__________________
EVGA 780i - P08 [ FSB:1.4v SPP:1.5v MCP:1.65v SPP<>MCP:1.4v ]
Q6600 G0 L747A [ 400x9:3.6ghz @ 1.43v - 445x9:4.0Ghz @ 1.55v ]
xFx GTX260 216 Black Edition [ GPU:740Mhz Shader:1515 Ram:1215Mhz ]
2x 1 GB - 2x 2 GB OCZ Reaper DDR2-800 4-4-4-12 [ 990Mhz ]
Win 7 Build 7600 - Arch Linux

Apogee GTZ - MCW60-R - 2xMCR320 - MCP655 - MasterKleer 7/16
7x yate loons - 2x Arctic fan 8

All in my wooden case
darkcow is offline   QUOTE Thanks
Old 03-15-07, 08:27 PM   #7
fireandice
Member



Join Date: Jun 2006

 
im running the same kit.

Sempron 2800+ Oc'ed to 2.2ghz idle 21c load 30c. Rad fan speed is set at 1700rpm.


Nice little kit. Not the best but not the worst.
fireandice is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling > Water Cooling
Water Cooling Discussion devoted to blocks, pumps, radiators, reservoirs, tubing, and everything else to get you running smooth on a water loop
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 04:37 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?