OP jb3231 Member Joined Jul 6, 2007 Aug 27, 2007 Thread Starter #3 Test 3 By jb3231 at 2007-08-26 Last edited: Aug 27, 2007
OP jb3231 Member Joined Jul 6, 2007 Aug 27, 2007 Thread Starter #4 I'm having trouble making the pics big enough.
OP jb3231 Member Joined Jul 6, 2007 Aug 27, 2007 Thread Starter #6 I know. I can't figure out how to get them any larger. Using Image Shack.
inkfx Member Joined Oct 8, 2004 Location San Antonio, Texas Aug 27, 2007 #7 FYI this is the version of SuperPi to be using. http://www.xtremesystems.com/pi/ Are the pics that small when you paste them into paint?
FYI this is the version of SuperPi to be using. http://www.xtremesystems.com/pi/ Are the pics that small when you paste them into paint?
jokers_greg Member Joined Jan 31, 2005 Location Mississauga, Ontario Aug 27, 2007 #8 make sure you're resizing them to message board size, or if thats it right there, then go to the next size.
make sure you're resizing them to message board size, or if thats it right there, then go to the next size.
A AC3421 Disabled Joined Oct 2, 2006 Location Santa Monica, California Aug 27, 2007 #9 Photobucket is so much better.
U UnrealAlex Member Joined Aug 19, 2005 Location Los Angeles, California Aug 27, 2007 #10 Save them as .jpg not as .png
R Rinthe Registered Joined Jul 25, 2007 Aug 27, 2007 #12 i cant read those images, but can you get core temp 0..95.4 and post what temp you get on load at 3.6? also, what voltage are you on?
i cant read those images, but can you get core temp 0..95.4 and post what temp you get on load at 3.6? also, what voltage are you on?
R Rinthe Registered Joined Jul 25, 2007 Aug 27, 2007 #14 so ur at 3.7 with 1.5 vcore? and what are you idle/load temps?
OP jb3231 Member Joined Jul 6, 2007 Aug 27, 2007 Thread Starter #15 Depends on fan speed. Fans on lowest setting idle around 37C load about 52C.
R Rinthe Registered Joined Jul 25, 2007 Aug 27, 2007 #16 so your voltage is 1.5 @ 3.7? also what are you idle/load temps?
inkfx Member Joined Oct 8, 2004 Location San Antonio, Texas Aug 27, 2007 #17 Try this beta version of CPUz. It should be displaying correct voltages now. http://www.cpuid.com/beta/cpuz.zip
Try this beta version of CPUz. It should be displaying correct voltages now. http://www.cpuid.com/beta/cpuz.zip
R Rinthe Registered Joined Jul 25, 2007 Aug 27, 2007 #18 jb3231 said: Depends on fan speed. Fans on lowest setting idle around 37C load about 52C. Click to expand... what is your lowest fan speed? and what program are you using to monitor your temps? try getting core temp 95.4
jb3231 said: Depends on fan speed. Fans on lowest setting idle around 37C load about 52C. Click to expand... what is your lowest fan speed? and what program are you using to monitor your temps? try getting core temp 95.4
OP jb3231 Member Joined Jul 6, 2007 Aug 27, 2007 Thread Starter #19 Core Temp 95.4 / Guru 36/35 idle / 35 idle 61/61 load / 55 load
OP jb3231 Member Joined Jul 6, 2007 Aug 27, 2007 Thread Starter #20 I need a new case to go liquid cooling. I don't have the room to add a radiator in my mid tower Tsunami case. I looked at a couple with built in radiators: http://www.newegg.com/Product/Product.aspx?Item=N82E16811233021 http://www.xoxide.com/thermaltake-kandolf-lcs-vd4000bws.html
I need a new case to go liquid cooling. I don't have the room to add a radiator in my mid tower Tsunami case. I looked at a couple with built in radiators: http://www.newegg.com/Product/Product.aspx?Item=N82E16811233021 http://www.xoxide.com/thermaltake-kandolf-lcs-vd4000bws.html