Stock GT cooler is not bad a tall. My GT results.

UnrealAlex · 11-30-07, 12:44 AM

Idle: 48C
Load: 65C

Rivatuner setup:
50% duty cycle when below 60C
80% duty cycle when above 60C
100% duty cycle when above 65C

My clocks are 711/1750/975
13,000 3dmark06

Crysis benchmark ,
Around 20FPS average increase from my 320mb GTS
1440x900, with some stuff at medium.
http://img.photobucket.com/albums/v1...afteroccry.jpg

Another temp screenshot(this was at stock to test temps)
http://img.photobucket.com/albums/v1...9/beforeoc.jpg

Awesome, blows away my GTS. The cooler is not bad at all, you just need to configure the fan cycle. My CM 690 may have helped a bit

Have a 120mm yate loon pointed directly at the card.

I kind of feel that people who got aftermarket coolers wasted their money, except maybe in terms of noise reduction and unless you're planning to voltmod. Temps are lower than my 320mb GTS actually, a bit noisier but still. I got artifacts in AtiTool at 720/1780/975 so this is perfectly fine for me

Conumdrum · 11-30-07, 11:24 AM

That fan at 100% is terribly loud. Thus the Aftermarket coolers.

Drinkyoghurt · 11-30-07, 11:27 AM

it does the job for me at 50% where it is silent and cools great(brings off 11c compared to the 29% setting)

Drinkyoghurt · 11-30-07, 11:49 AM

here is my result @ 50%, still testing though.

Rattle · 11-30-07, 03:41 PM

i run both mine at 60% 24/7 and I usually never go over 65c

Brolloks · 11-30-07, 09:47 PM

It is really worth getting an aftermarket HSF...I'm currently on 774/1836/950 and have rthdribl running with the ATITool open scanning for artifacts... stable for 59 minutes and temps registered by RivaTuner at 45 C

Conumdrum · 11-30-07, 10:30 PM

my HR03 GT just arrived.

Fed X, 820 PM, man the driver looked tired, been raining all day. Will update with final #'s when done, I won't be lapping it, I'm outta vodka.

It's pretty, all shiny!!!

Rattle · 11-30-07, 10:34 PM

Quote:

Originally Posted by Brolloks

It is really worth getting an aftermarket HSF...I'm currently on 774/1836/950 and have rthdribl running with the ATITool open scanning for artifacts... stable for 59 minutes and temps registered by RivaTuner at 45 C

45c???

Brolloks · 11-30-07, 10:49 PM

Quote:

Originally Posted by Rattle

45c???

Yep, I can e-mail you a screenhot if you don't believe it

...you should also see such low temps..the stock cooler on this GT is absolutely crap, any aftermarket cooler is better, there is just now airflow around the stock cooler, where us the heat suppose to go

Rattle · 11-30-07, 11:03 PM

thought you were on stock cooler...

what are you using ?

Brolloks · 12-01-07, 08:27 AM

Quote:

Originally Posted by Rattle

thought you were on stock cooler...

what are you using ?

Zerothrem Hurricane HC92 Cu 8800

11-30-07, 12:44 AM	Thread Starter #1
UnrealAlex Member Join Date: Aug 2005 Location: Los Angeles, California	Stock GT cooler is not bad a tall. My GT results. Idle: 48C Load: 65C Rivatuner setup: 50% duty cycle when below 60C 80% duty cycle when above 60C 100% duty cycle when above 65C My clocks are 711/1750/975 13,000 3dmark06 Crysis benchmark , Around 20FPS average increase from my 320mb GTS 1440x900, with some stuff at medium. http://img.photobucket.com/albums/v1...afteroccry.jpg Another temp screenshot(this was at stock to test temps) http://img.photobucket.com/albums/v1...9/beforeoc.jpg Awesome, blows away my GTS. The cooler is not bad at all, you just need to configure the fan cycle. My CM 690 may have helped a bit Have a 120mm yate loon pointed directly at the card. I kind of feel that people who got aftermarket coolers wasted their money, except maybe in terms of noise reduction and unless you're planning to voltmod. Temps are lower than my 320mb GTS actually, a bit noisier but still. I got artifacts in AtiTool at 720/1780/975 so this is perfectly fine for me __________________ #1: C2D e6750@3.4, 1.41v with Ultima-90; GA-P35-DS3R; Crucial Ballistix 2GB; eVGA 8800GT 711/1750/975; Corsair HX520; X-Fi XtremeGamer; CM 690. #2: i5 2500k, Hyper212+, GA-Z68XP-UD3P, 8GB Corsair Vengeance, Corsair TX750M PSU, Gigabyte 6950 1Gb. Last edited by UnrealAlex; 11-30-07 at 12:52 AM.
	QUOTE Thanks

11-30-07, 11:24 AM	#2
Conumdrum Mutant Forrespondent Join Date: Sep 2007 Location: Las Vegas	That fan at 100% is terribly loud. Thus the Aftermarket coolers.
	QUOTE Thanks

11-30-07, 11:27 AM	#3
Drinkyoghurt Member Join Date: Mar 2006 Location: Eindhoven, The Netherlands	it does the job for me at 50% where it is silent and cools great(brings off 11c compared to the 29% setting) __________________ CPU:Intel i5-2500k 4.7ghz 1.34V - M0b0:Asrock P67 Pro3 Rev. B3 - Ram:Corsair XMS3 1600mhz 7-8-7-21 1.63V - Cooler: Thermalright Ultra 120 Extreme - Videocard:Sparkle GTX 260 216 core 55nm - 14459 marks in 3Dmark06 Reboot: "Don't argue with idiots. They bring you to their level and beat you with experience." rdrash:"I think Todd changes hardware more frequently then he changes his underpants." Join the benching team and be part of the elite
	QUOTE Thanks

11-30-07, 11:49 AM	#4
Drinkyoghurt Member Join Date: Mar 2006 Location: Eindhoven, The Netherlands	here is my result @ 50%, still testing though. __________________ CPU:Intel i5-2500k 4.7ghz 1.34V - M0b0:Asrock P67 Pro3 Rev. B3 - Ram:Corsair XMS3 1600mhz 7-8-7-21 1.63V - Cooler: Thermalright Ultra 120 Extreme - Videocard:Sparkle GTX 260 216 core 55nm - 14459 marks in 3Dmark06 Reboot: "Don't argue with idiots. They bring you to their level and beat you with experience." rdrash:"I think Todd changes hardware more frequently then he changes his underpants." Join the benching team and be part of the elite
	QUOTE Thanks

11-30-07, 03:41 PM	#5
Rattle Member Join Date: May 2005 Location: Home... again	i run both mine at 60% 24/7 and I usually never go over 65c __________________ Mpower Max \| 4770k \| H100 \| 16gb Sammy 30nm 1866 \| GTX780 SC \| Xonar Essence Stx \| BIC DV62si \| ATH AD700 \| 550d \| AX850 \| VG24QE \| 840pro 256gb \| 640black \| 2tb \| CherryReds \| m60 \| Func1030 \| HEAT
	QUOTE Thanks

Stock GT cooler is not bad a tall. My GT results.

Internet Services

Website Development

Tech Hardware

11-30-07, 09:47 PM	#6
Brolloks Benching Senior on Siesta Premium Member #8 Join Date: Dec 2006 Location: Land of Long Horns	It is really worth getting an aftermarket HSF...I'm currently on 774/1836/950 and have rthdribl running with the ATITool open scanning for artifacts... stable for 59 minutes and temps registered by RivaTuner at 45 C __________________ Should I get a Quad- or Dual-Core? - How about joining us in the Benching Lounge for some secrets - Want to bench sub-zero...take a look. Heatware 280-0-0 HWBOT Profile
	QUOTE Thanks

11-30-07, 10:30 PM	#7
Conumdrum Mutant Forrespondent Join Date: Sep 2007 Location: Las Vegas	my HR03 GT just arrived. Fed X, 820 PM, man the driver looked tired, been raining all day. Will update with final #'s when done, I won't be lapping it, I'm outta vodka. It's pretty, all shiny!!!
	QUOTE Thanks

11-30-07, 11:03 PM	#10
Rattle Member Join Date: May 2005 Location: Home... again	thought you were on stock cooler... what are you using ? __________________ Mpower Max \| 4770k \| H100 \| 16gb Sammy 30nm 1866 \| GTX780 SC \| Xonar Essence Stx \| BIC DV62si \| ATH AD700 \| 550d \| AX850 \| VG24QE \| 840pro 256gb \| 640black \| 2tb \| CherryReds \| m60 \| Func1030 \| HEAT
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search