thermochill barb??

s002wjh · 12-25-07, 11:39 PM

anyone know where to get thermochill barb/fitting? also is there a elbow barb that will fit the thermochill?

lilspooky · 12-26-07, 12:15 AM

Basically you can't find very many places that sell/make 3/8 - 1/2 barbs so you have to buy an adapter. Go to http://www.mcmaster.com and type 4860K657 into the search box, it'll bring up "Brass Threaded Pipe Fitting Nickl-Pltd, 3/8" BSPP Male X1/4" BSPP Fem, Hex Bushing"
[In stock at $4.74 Each]

After that you'll be able to use standard 1/4 - 1/2 barbs such as these Switftech ones http://www.frozencpu.com/products/55...tml?tl=g30c101

Hope that helps anyone else who is having trouble finding barbs!

PS You may want to read over this thread...

http://www.xtremesystems.org/forums/...d.php?t=157999

t3chHungry · 01-19-08, 08:41 PM

I bought mine here:http://www.thermochill.com/acatalog/...cessories.html
a little pricey coming from the UK> They accept paypal

voigts · 01-20-08, 12:25 AM

Petras has EK G3/8" 1/2"OD barbs now - http://www.petrastechshop.com/ekhifig3th1o.html

I was looking for some other stuff and noticed he is carrying these now. I wish he would have had these when I bought my Mcmaster adapters as it would have saved me about $15.

ManOfKnight · 01-20-08, 08:46 AM

There are some for sale in the cooling section of this forum now.

12-25-07, 11:39 PM	Thread Starter #1
s002wjh Member Join Date: Jul 2004	thermochill barb?? anyone know where to get thermochill barb/fitting? also is there a elbow barb that will fit the thermochill?
	QUOTE Thanks

12-26-07, 12:15 AM	#2
lilspooky New Member Join Date: Nov 2007	Basically you can't find very many places that sell/make 3/8 - 1/2 barbs so you have to buy an adapter. Go to http://www.mcmaster.com and type 4860K657 into the search box, it'll bring up "Brass Threaded Pipe Fitting Nickl-Pltd, 3/8" BSPP Male X1/4" BSPP Fem, Hex Bushing" [In stock at $4.74 Each] After that you'll be able to use standard 1/4 - 1/2 barbs such as these Switftech ones http://www.frozencpu.com/products/55...tml?tl=g30c101 Hope that helps anyone else who is having trouble finding barbs! PS You may want to read over this thread... http://www.xtremesystems.org/forums/...d.php?t=157999 Last edited by lilspooky; 12-26-07 at 12:20 AM.
	QUOTE Thanks

01-19-08, 08:41 PM	#3
t3chHungry Registered Join Date: Jan 2007 Location: near the brickyard	I bought mine here:http://www.thermochill.com/acatalog/...cessories.html a little pricey coming from the UK> They accept paypal
	QUOTE Thanks

01-20-08, 12:25 AM	#4
voigts Member Join Date: Feb 2005 Location: Tennessee	Petras has EK G3/8" 1/2"OD barbs now - http://www.petrastechshop.com/ekhifig3th1o.html I was looking for some other stuff and noticed he is carrying these now. I wish he would have had these when I bought my Mcmaster adapters as it would have saved me about $15.
	QUOTE Thanks

01-20-08, 08:46 AM	#5
ManOfKnight Member Join Date: Jan 2001 Location: Back in Iowa :( Come on Gators, Get up and Go!	There are some for sale in the cooling section of this forum now. __________________ Laptop: XPS m1530 \| T7700 2.2Ghz \| 2048MB GSkill DDR2 \| NVidia m8600GT 256MB DDR3 :D \| 120GB 7200rpm Project Caesar: Q9450 @ 3.4Ghz \| Maximus Formula \| 8192MB OCZ Reaper \| eVGA GTX260 \| XFX 8800GTS for F@H \| 2780GB Total Sata Project Jessks: e8400 @ 4.2Ghz \| P5KE-WiFi/AP \| 4096MB GSkill Red \| ATi HD4850 (folding) \| 74GB Raptor \| 1.5TB Green WD Project Fileserver: Phenom 9850 \| Biostar 790GX \| 2048MB GSkill \| (4) 1.5TB Green WD Computers are running 24/7 World Community Grid and Folding@Home for My Mother, My Sister, Julie Stutzman, Gary Janssen, and Shelly Laborde My Heatware 30-0
	QUOTE Thanks

thermochill barb??

Internet Services

Website Development

Tech Hardware

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search