Overclockers Forums > Hardware > CPUs > Intel CPUs
Intel CPUs
Forum Jump

Direction Please e6850

Post Reply New Thread Subscribe Search this Thread
Thread Tools
Old 01-22-08, 07:34 PM Thread Starter   #1
New Member

Join Date: Jan 2008

Direction Please e6850

After some other information I now have a stable 3.6ghz e6850 that is Prime95 tested at both 12, and 24 hours, cleared, error free.

Now to take it to the next step, or so I hope.

Currently these are my settings under CPU-Z:
CPU: 3.608ghz
Multi: x8
FSB: 451
Rated FSB: 1804.2
Dram Freq: 902.1
Clock: 9-9-9-24
Com Raate: 1T

Temps are as follows at Idle:
MOBO: 27c
Core1: 32c
Core2: 23c
NB: 32c
SB: 28c

Temps are as follows at Load:
MOBO: 27c
CPU: 41c
Core1: 50c
Core2: 41c
NB: 34c
SB: 29c

CPUv: 1.42
CPU PLLv: 1.60
NBv: 1.49
DRAMv: 1.90
FSBTermv: 1.36
SBv: 1.125

CPU GTL Ref: .63x
NB GTL Ref: .67x

Now tonight I plan to start testing and run Prime95 with the setting on the FSB up'ed to 465 while dropping the CPU voltage to 1.38 or so. Would this be the ideal way in trying to pump out some more ghz, or am I still running down the wrong road ? This is my first experience with OC'ing and first experience building a comp!

At FSB 465 if I can run for 6-10 hours stable I would like to bump it up some more but currently im trying to take it slow and one step at a time to allow the CPU to get used to running under the new settings.

Any guidance would be very much appriciated and welcome!

Thanks in advance,


[Comp Specs]
Asus Maximus Extreme MOBO
OCz 1600 DDR3 2gig currently
Thermaltake 1k PSU
Water cooled (CPU and NB are both being cooled by the setup that came in the Thermaltake Swordm Case, not the best, but soon to be replaced by the Koolance CPU-330 CPU Block, 2x Koolance VR-AS40 Voltage Reg Blocks, Koolance CHC-120 NB Block, and running this loop the Koolance EXOS-2 LX)
KevinKool is offline   QUOTE Thanks
Old 02-21-08, 05:34 PM   #2
New Member

ShinyThings's Avatar 

Join Date: Feb 2008

I'm running my E6850 stable a bit higher spec.
CPU: 3.8 Ghz
Multi: x8
FSB: 475
Rated FSB: 1900
RAM Freq: 1140
Ratio: 5:6
Timings: 6-6-6-18
FSB voltage:1.5
CPU idle temp: 22
CPU load temp: 48

Hope this gives you some of the info you were looking for

Last edited by ShinyThings; 02-22-08 at 03:53 PM.
ShinyThings is offline   QUOTE Thanks

Post Reply New Thread Subscribe

Overclockers Forums > Hardware > CPUs > Intel CPUs
Intel CPUs
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Mobile Skin
All times are GMT -5. The time now is 09:19 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!

Welcome to

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!

(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?