Rosewill RCX-Z775-LX good enough?

DocClock aka MadClocker · 02-02-08, 04:00 PM

I want to get rid of my stock cooler for an aftermarket unit, and was looking and seen this one and it looks good, but I like to research b4 buying.
linky http://www.newegg.com/Product/Produc...82E16835200035
Sooo whatd'ya think?
Doc

Fleron230 · 02-02-08, 04:04 PM

If you want something cheap, take the Artic Cooling Freezer 7, probably better than that. The best air heatsink is the TRUE120 currently, if that may be what you're looking for.

muddocktor · 02-02-08, 04:08 PM

I guess it would be ok for it's price, but it's not going to give an U-120X, Ultima90, or TT-120 a run for the money. Also, I just hate that pushpin mounting crap like it uses too. It always feels like it's going to warp my mobo, using that type mounting system. I much prefer a mount that uses a back plate myself.

Drinkyoghurt · 02-02-08, 04:10 PM

I don't know, that one looks similar to a freezer pro(which is better in silence but should perform the same and cost the same)

don't like pushpins either, the last one is always a pain to get in and I always have a feeling that it's gonna pop off, like mud I prefer a backplate myself

DocClock aka MadClocker · 02-02-08, 04:27 PM

Yea, that's all I need, just want a little better than stock...I don't plan on taking this q6600 to 4g...I figure if I can get up to around 3.4-3.6 I'll be happy.... at 2:3 ratio, my mem should be maxed out @3.4-3.6g with tight timings.
Thanks for all the replies,
Doc

02-02-08, 04:00 PM	Thread Starter #1
DocClock aka MadClocker Senior Member Join Date: Dec 2000 Location: Stockton Cal, USA, Earth	Rosewill RCX-Z775-LX good enough? I want to get rid of my stock cooler for an aftermarket unit, and was looking and seen this one and it looks good, but I like to research b4 buying. linky http://www.newegg.com/Product/Produc...82E16835200035 Sooo whatd'ya think? Doc __________________ Cpu----Q6600(slacr)GO stepping @3006,1.310vcore Cooling----AC Freezer 7 Pro Mobo----GA-P35C-DS3R Ram----Kingston HX PC9200 CL5@501mhz 1.9v4-4-4-11 Video card----EVGA 8600GT 604core,803mem Power----Hipro HP-W700WC3 700w Big and heavy Generic white case Frankenputer-- Abit SH6>PIII700E@1136>mushkin PC150>Enermax 431 -450w>SBlive! XGamer> Alpha P3S cooler
	QUOTE Thanks

02-02-08, 04:04 PM	#2
Fleron230 Registered Join Date: Jan 2008	If you want something cheap, take the Artic Cooling Freezer 7, probably better than that. The best air heatsink is the TRUE120 currently, if that may be what you're looking for.
	QUOTE Thanks

02-02-08, 04:08 PM	#3
muddocktor Retired Join Date: Nov 2001 Location: New Iberia, LA	I guess it would be ok for it's price, but it's not going to give an U-120X, Ultima90, or TT-120 a run for the money. Also, I just hate that pushpin mounting crap like it uses too. It always feels like it's going to warp my mobo, using that type mounting system. I much prefer a mount that uses a back plate myself.
	QUOTE Thanks

02-02-08, 04:10 PM	#4
Drinkyoghurt Member Join Date: Mar 2006 Location: Eindhoven, The Netherlands	I don't know, that one looks similar to a freezer pro(which is better in silence but should perform the same and cost the same) don't like pushpins either, the last one is always a pain to get in and I always have a feeling that it's gonna pop off, like mud I prefer a backplate myself __________________ CPU:Intel i5-2500k 4.7ghz 1.34V - M0b0:Asrock P67 Pro3 Rev. B3 - Ram:Corsair XMS3 1600mhz 7-8-7-21 1.63V - Cooler: Thermalright Ultra 120 Extreme - Videocard:Sparkle GTX 260 216 core 55nm - 14459 marks in 3Dmark06 Reboot: "Don't argue with idiots. They bring you to their level and beat you with experience." rdrash:"I think Todd changes hardware more frequently then he changes his underpants." Join the benching team and be part of the elite
	QUOTE Thanks

02-02-08, 04:27 PM	Thread Starter #5
DocClock aka MadClocker Senior Member Join Date: Dec 2000 Location: Stockton Cal, USA, Earth	Yea, that's all I need, just want a little better than stock...I don't plan on taking this q6600 to 4g...I figure if I can get up to around 3.4-3.6 I'll be happy.... at 2:3 ratio, my mem should be maxed out @3.4-3.6g with tight timings. Thanks for all the replies, Doc __________________ Cpu----Q6600(slacr)GO stepping @3006,1.310vcore Cooling----AC Freezer 7 Pro Mobo----GA-P35C-DS3R Ram----Kingston HX PC9200 CL5@501mhz 1.9v4-4-4-11 Video card----EVGA 8600GT 604core,803mem Power----Hipro HP-W700WC3 700w Big and heavy Generic white case Frankenputer-- Abit SH6>PIII700E@1136>mushkin PC150>Enermax 431 -450w>SBlive! XGamer> Alpha P3S cooler
	QUOTE Thanks

Rosewill RCX-Z775-LX good enough?

Internet Services

Website Development

Tech Hardware

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search