did I make a bad choice of memory?

JN.Nicolosi · 02-21-08, 01:25 PM

780i
8800 GTS 512
Corsair 4gb
Q6600 Quad
750 w thermaltake

http://www.newegg.com/Product/Produc...82E16820145194

deeppow · 02-21-08, 02:43 PM

I would say, it is fine. With those timings, it'll also probably run 1000 or 1066 with relaxed timings. Also that motherboard allows great flexibility with memory speed.

Kai_Force · 02-21-08, 05:01 PM

No dude that memory is really awesome. A great overclocker!

Th3 F4ll3n P1mp · 02-21-08, 05:49 PM

Nah dont worry. Good memory.

JN.Nicolosi · 02-22-08, 01:37 PM

Ok guys thanks for the great info.

I got my PC to run at 3.2 stable yesterday and now i want to adjust the ram.

Can you guys give me some info on what would be a good start?

deeppow · 02-22-08, 04:28 PM

Within the bios there will be an option to link or unlink your memory. The link options ties it to the FSB. The unlink option is what you want to select and that should open up the RAM for either overclocking or underclock plus timing options.

02-21-08, 01:25 PM	Thread Starter #1
JN.Nicolosi New Member Join Date: Feb 2008 Location: Newark CA	did I make a bad choice of memory? 780i 8800 GTS 512 Corsair 4gb Q6600 Quad 750 w thermaltake http://www.newegg.com/Product/Produc...82E16820145194
	QUOTE Thanks

02-21-08, 02:43 PM	#2
deeppow Senior Member Join Date: May 2002 Location: Los Alamos, NM	I would say, it is fine. With those timings, it'll also probably run 1000 or 1066 with relaxed timings. Also that motherboard allows great flexibility with memory speed. __________________ ASUS P8Z77-V Pro , Intel i7 2600K @4.6Ghz using 1.3V -- Corsair DDR3 1600 (42Gb) 9-9-9-24 -- Iwaki MD-20RLZT -> EK Sup. Univ. -> Chiller -> Resev -- EVGA GTX680,Klipsch Promedia 4.1 -- Intel 510 120G, Crucial M4 120G, Areca RAID 5, 4 80G SATAII HDDs -- Corsair 1050 in Lian-Li PC-V1200 -- Win7 64-bit, Ubuntu 64-bit ASUS Rampage II Extreme @180Mhz , Intel i7 920 D0 @3.6Ghz using 1.3V, Thermalright 120 -- G.Skill DDR3 1600 (32Gb) 8-8-8-21, Win7 64-bit -- Lian-Li PC-V1200
	QUOTE Thanks

02-21-08, 05:01 PM	#3
Kai_Force Member Join Date: Jun 2007	No dude that memory is really awesome. A great overclocker! __________________ _____________________________________________ E6600@3.375Ghz 1.35V 375x9 Zalman9700 Evga 680i SLI Mobo 4G G Skill DDR2 Ram 5-5-5-15@1100Mhz 2.1V Evga 8800GTX 768M 50c/65c Antec 1200 Case 3 Seagate 1TB -Raid 5- Areca 1210 Raid card 2x Dell 2407WFP ABS Tagan BZ 700 Watt Z-5500 + Xfi XtremeGamer
	QUOTE Thanks

02-21-08, 05:49 PM	#4
Th3 F4ll3n P1mp Disabled Join Date: Jan 2008 Location: 127.0.0.1	Nah dont worry. Good memory.
	QUOTE Thanks

02-22-08, 01:37 PM	Thread Starter #5
JN.Nicolosi New Member Join Date: Feb 2008 Location: Newark CA	Ok guys thanks for the great info. I got my PC to run at 3.2 stable yesterday and now i want to adjust the ram. Can you guys give me some info on what would be a good start?
	QUOTE Thanks

did I make a bad choice of memory?

Internet Services

Website Development

Tech Hardware

02-22-08, 04:28 PM	#6
deeppow Senior Member Join Date: May 2002 Location: Los Alamos, NM	Within the bios there will be an option to link or unlink your memory. The link options ties it to the FSB. The unlink option is what you want to select and that should open up the RAM for either overclocking or underclock plus timing options. __________________ ASUS P8Z77-V Pro , Intel i7 2600K @4.6Ghz using 1.3V -- Corsair DDR3 1600 (42Gb) 9-9-9-24 -- Iwaki MD-20RLZT -> EK Sup. Univ. -> Chiller -> Resev -- EVGA GTX680,Klipsch Promedia 4.1 -- Intel 510 120G, Crucial M4 120G, Areca RAID 5, 4 80G SATAII HDDs -- Corsair 1050 in Lian-Li PC-V1200 -- Win7 64-bit, Ubuntu 64-bit ASUS Rampage II Extreme @180Mhz , Intel i7 920 D0 @3.6Ghz using 1.3V, Thermalright 120 -- G.Skill DDR3 1600 (32Gb) 8-8-8-21, Win7 64-bit -- Lian-Li PC-V1200
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search