Notices

Overclockers Forums > Hardware > CPUs > AMD CPUs
AMD CPUs
Forum Jump

help OC am2 X2 4600+EE first timer

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 03-14-08, 01:51 AM Thread Starter   #1
nooby02
New Member



Join Date: Nov 2005

 
help OC am2 X2 4600+EE first timer


hey all, this is wat i got. ive read the OC guide, and i get a general understanding of wat happens, i jst need alittle more assistance
could anyone tell me wat the time limit is for this chip is also?

am2 x2 4600+ EE
zalman CPNS9500
OCZ PC2-6400 2gb dual channel
asus crosshair m/b (do i need to get latest BIOS?)
idle temp 40-44
load temp ?(havent tried load yet)
nooby02 is offline   QUOTE Thanks
Old 03-14-08, 03:33 AM   #2
Kuroimaho
Member

 
Kuroimaho's Avatar 

Join Date: May 2004
Location: Japan, Tokyo, Ueno.

 
Hard to tell what a chip can do the deviation can be more than 10% in oc even from the same stepping.

If you have an F3 stepping you should be able to reach 3G. ADO4600IAA5CZ is written on the cpu or ADO4600CZBOX on the box.

I recommend to check each component on its own by limiting the others as possible to see the limits of your parts.

Drop the multiplier and the memory as well to see the max of the motherboard.
Then set the memory to 800 and push the HT again from 200 to see how much the memory can take. Then set the multiplier to the maximum what the processor allows and see the end of the cpu.

What remains is to find the best combination for your ram and cpu which might mean its better to drop the multi lower so you can maxmize the ram.

__________________
Zalman Zmachine GT1000
I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


Zalman TNN300
Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


Zalman TNN500
Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".
Kuroimaho is offline   QUOTE Thanks
Old 03-14-08, 05:04 AM Thread Starter   #3
nooby02
New Member



Join Date: Nov 2005

 
kk kools, ive found some settings this guy did for his review you rkn i could jst cheat and go with them?

Quote:
Successful Overclocks
* 2.4GHz using 1.216v (200 x 12)
* 2.532GHz using 1.216v (200 x 12)
* 2.58GHz using 1.23v (215 x 12)
* 2.62GHz using 1.26v (219 x 12)
* 2.68GHz using 1.41v (223 x 12)
* 2.76GHz using 1.46v (230 x 12)
* 2.85GHz using 1.46v (285 x 10) (One core stable only)
nooby02 is offline   QUOTE Thanks
Old 03-14-08, 05:19 AM   #4
Kuroimaho
Member

 
Kuroimaho's Avatar 

Join Date: May 2004
Location: Japan, Tokyo, Ueno.

 
That seems to be an F2, better test for yourself as if yours is an F3 it might hit 3G on stock V, check the box or the top of the cpu, would help if you could post the numbers you see there.

__________________
Zalman Zmachine GT1000
I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


Zalman TNN300
Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


Zalman TNN500
Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".
Kuroimaho is offline   QUOTE Thanks
Old 03-14-08, 05:28 AM Thread Starter   #5
nooby02
New Member



Join Date: Nov 2005

 
where can i locate this number you speak of?
i fink i found wat ur talkn about ADO4600CUBOX

Last edited by nooby02; 03-14-08 at 05:46 AM. Reason: found answer
nooby02 is offline   QUOTE Thanks
Old 03-14-08, 06:26 AM   #6
Kuroimaho
Member

 
Kuroimaho's Avatar 

Join Date: May 2004
Location: Japan, Tokyo, Ueno.

 
Then here is your processor. LINK

If you search for it these are the released processors based on F2 core. LINK

The high end models overclocked to 3G I think it is a safe bet to say is yours can do 2.6-2.8G.

__________________
Zalman Zmachine GT1000
I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


Zalman TNN300
Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


Zalman TNN500
Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".
Kuroimaho is offline   QUOTE Thanks
Old 07-16-08, 01:34 AM   #7
OCerAM2
New Member



Join Date: Jul 2008

 
4600+ to OC @ 3Ghz.

Multi set to x 11.0
1.420v
FSB 272
= 3Ghz stable.

30'c - 35'c for me.
OCerAM2 is offline   QUOTE Thanks
Old 07-16-08, 07:36 AM   #8
Kuroimaho
Member

 
Kuroimaho's Avatar 

Join Date: May 2004
Location: Japan, Tokyo, Ueno.

 
Welcome to the forum, it is more informative if you post you hardware besides the results.

__________________
Zalman Zmachine GT1000
I7920 4G Apogee GTZ I7, Bloodrage, 6GB, Intel X25-V, 2X WD3000GLFS R0, Hitachi 7K3 X4 R5, 580 GTX, IIYAMA 27", Corsair HX750, Steelseries 7G, XAI, SX


Zalman TNN300
Q6600 3.4G, Asus P5E-VM, 2GB, WD3000GLFS, 2x501LJ, Apple 23"


Zalman TNN500
Phenom 2 550 X4 3.5G, GA-MA790FX-UD5P, TWIN2X4096-6400C4DHX,Tesla C1060, WD3000GLFS 3x1TB WD, Apple 30".
Kuroimaho is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > CPUs > AMD CPUs
AMD CPUs
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 01:42 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?