BioHazard Phase change

Sony190 · 04-13-08, 03:10 PM

How is this for a Phase change unit
http://www.nordichardware.com/news,7344.html

Diddyu · 04-13-08, 05:25 PM

Expensive, but that is to be expected when ordering a prebuilt system, especially one with phase. Not sure how it would do comparitlvely, im only working on my first phase system. On the plus side, they seem to be very customer oriented, allowing you to custom order a computer, linking to newegg ect. for a part that they dont have listed.

Sony190 · 04-13-08, 05:31 PM

Are there any more on the market that accepts 2 CPU and 2 GPU?

NoL · 04-13-08, 06:00 PM

First does only CPU and 2 GPU, and not very low temperatures, the unit is built by Jinu as proof of concept. Its about $1500 for the unit, its not a very hard to do thing, however I don't think phase'ing the GPU's is worth while so I no longer offer that to customers in most cases. Its too horrible to insulate the cards for 24/7 operation

I still do dual CPU's though for customers.

Sony190 · 04-13-08, 08:18 PM

Well if you Phase Change your CPU what do you do for /n/B and South bridge ?it makes no sense to have half modded board

NoL · 04-13-08, 08:42 PM

NB and SB really don't need a phase change setup, air is more then enough, some people water cool them but its not even needed.

04-13-08, 03:10 PM	Thread Starter #1
Sony190 Member Join Date: Dec 2006	BioHazard Phase change How is this for a Phase change unit http://www.nordichardware.com/news,7344.html __________________ ASROCK 970 Extreme 3 amd 64 X2 550BE @3.9 Ghz Intel 520ssd 4048 Kingston Hyper X DDR3 Ram Mint 12 Powercolor HD4870 512mb Antec 650 watt
	QUOTE Thanks

04-13-08, 05:25 PM	#2
Diddyu Member Join Date: Dec 2007	Expensive, but that is to be expected when ordering a prebuilt system, especially one with phase. Not sure how it would do comparitlvely, im only working on my first phase system. On the plus side, they seem to be very customer oriented, allowing you to custom order a computer, linking to newegg ect. for a part that they dont have listed. __________________ Mobo: XFX 680i LT CPU: Intel Q6600 G0 @ 3.8 ghz Cooling: Apogee GT + MCW60 RAM: OCZ SLI Ready 6400 @ 1000mhz 2 x 1gb Vid: 2x EVGA 8800GTS 512 (g92) @ 812/1035/2020 Case: NZXT Lexa Black PSU: Ultra Xfinity 600W 3dMark06:18356 marks
	QUOTE Thanks

04-13-08, 05:31 PM	Thread Starter #3
Sony190 Member Join Date: Dec 2006	Are there any more on the market that accepts 2 CPU and 2 GPU? __________________ ASROCK 970 Extreme 3 amd 64 X2 550BE @3.9 Ghz Intel 520ssd 4048 Kingston Hyper X DDR3 Ram Mint 12 Powercolor HD4870 512mb Antec 650 watt
	QUOTE Thanks

04-13-08, 06:00 PM	#4
NoL Member Join Date: Jun 2006 Location: NJ, USA	First does only CPU and 2 GPU, and not very low temperatures, the unit is built by Jinu as proof of concept. Its about $1500 for the unit, its not a very hard to do thing, however I don't think phase'ing the GPU's is worth while so I no longer offer that to customers in most cases. Its too horrible to insulate the cards for 24/7 operation I still do dual CPU's though for customers.
	QUOTE Thanks

04-13-08, 08:18 PM	Thread Starter #5
Sony190 Member Join Date: Dec 2006	Well if you Phase Change your CPU what do you do for /n/B and South bridge ?it makes no sense to have half modded board __________________ ASROCK 970 Extreme 3 amd 64 X2 550BE @3.9 Ghz Intel 520ssd 4048 Kingston Hyper X DDR3 Ram Mint 12 Powercolor HD4870 512mb Antec 650 watt
	QUOTE Thanks

BioHazard Phase change

Internet Services

Website Development

Tech Hardware

04-13-08, 08:42 PM	#6
NoL Member Join Date: Jun 2006 Location: NJ, USA	NB and SB really don't need a phase change setup, air is more then enough, some people water cool them but its not even needed.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search