Unstable OC.

Th3 F4ll3n P1mp · 04-27-08, 12:05 PM

Dang, my OC is unstable. I was playing CoD4 on single player, and my pc rebooted itself. How can I stabilize it? My Q6700 is at 3.6 ghz with 1.4625 vcore. Ram is same as in sig.

JamesXP · 04-27-08, 12:07 PM

Could you post all your BIOS setttings relating to CPU/MB/RAM?

Th3 F4ll3n P1mp · 04-27-08, 12:11 PM

Yeppers, give me 5 mins.

Th3 F4ll3n P1mp · 04-27-08, 12:19 PM

Cpu
10x multi
1440 = 360 fsb
1.4625 volts
1.408 after vdroop (

)

Nb
Stock everything

Ram
468 mhz (400 stock)
Unlinked
2.1 volts (yeah I know, I gotta lower it...)
Cpuz tells me the ram is 10:13
Running 4 gigs of it.

JamesXP · 04-27-08, 12:26 PM

Ding ding.

Raise your NB/MCP voltage, should be good to go then

(hopefully anway =/)

Th3 F4ll3n P1mp · 04-27-08, 01:00 PM

Lol, thanks.
Its on auto atm, what should I raise it to?

JamesXP · 04-27-08, 01:01 PM

Around 1.4-1.5

Th3 F4ll3n P1mp · 04-27-08, 01:53 PM

Doesnt work at 1.5, so I gave it 1.55-1.6. Btw what wasnt working with my overclock going any higher than 3.6 was the MCP lol. I gave it the max, and 3.8 ghz and it booted, but the vcore vdroop was being annoying, and it kept on getting bsod on boot. I will pencil mod it later. Thanks a lot james.

04-27-08, 12:05 PM	Thread Starter #1
Th3 F4ll3n P1mp Disabled Join Date: Jan 2008 Location: 127.0.0.1	Unstable OC. Dang, my OC is unstable. I was playing CoD4 on single player, and my pc rebooted itself. How can I stabilize it? My Q6700 is at 3.6 ghz with 1.4625 vcore. Ram is same as in sig.
	QUOTE Thanks

04-27-08, 12:07 PM	#2
JamesXP Epic Fail Guy Join Date: Apr 2007 Location: England	Could you post all your BIOS setttings relating to CPU/MB/RAM? __________________ Intel i5 3570k @ 4.2GHz 8GB Kingston HyperX DDR 1600Mhz nVidia 8600GT ASRock Z77 Pro4 128GB Samsung 830 SSD Corsair VX450 My Saitek Eclipse III Review
	QUOTE Thanks

04-27-08, 12:11 PM	Thread Starter #3
Th3 F4ll3n P1mp Disabled Join Date: Jan 2008 Location: 127.0.0.1	Yeppers, give me 5 mins.
	QUOTE Thanks

04-27-08, 12:19 PM	Thread Starter #4
Th3 F4ll3n P1mp Disabled Join Date: Jan 2008 Location: 127.0.0.1	Cpu 10x multi 1440 = 360 fsb 1.4625 volts 1.408 after vdroop () Nb Stock everything Ram 468 mhz (400 stock) Unlinked 2.1 volts (yeah I know, I gotta lower it...) Cpuz tells me the ram is 10:13 Running 4 gigs of it.
	QUOTE Thanks

04-27-08, 12:26 PM	#5
JamesXP Epic Fail Guy Join Date: Apr 2007 Location: England	Ding ding. Raise your NB/MCP voltage, should be good to go then (hopefully anway =/) __________________ Intel i5 3570k @ 4.2GHz 8GB Kingston HyperX DDR 1600Mhz nVidia 8600GT ASRock Z77 Pro4 128GB Samsung 830 SSD Corsair VX450 My Saitek Eclipse III Review
	QUOTE Thanks

Unstable OC.

Internet Services

Website Development

Tech Hardware

04-27-08, 01:00 PM	Thread Starter #6
Th3 F4ll3n P1mp Disabled Join Date: Jan 2008 Location: 127.0.0.1	Lol, thanks. Its on auto atm, what should I raise it to?
	QUOTE Thanks

04-27-08, 01:01 PM	#7
JamesXP Epic Fail Guy Join Date: Apr 2007 Location: England	Around 1.4-1.5 __________________ Intel i5 3570k @ 4.2GHz 8GB Kingston HyperX DDR 1600Mhz nVidia 8600GT ASRock Z77 Pro4 128GB Samsung 830 SSD Corsair VX450 My Saitek Eclipse III Review
	QUOTE Thanks

04-27-08, 01:53 PM	Thread Starter #8
Th3 F4ll3n P1mp Disabled Join Date: Jan 2008 Location: 127.0.0.1	Doesnt work at 1.5, so I gave it 1.55-1.6. Btw what wasnt working with my overclock going any higher than 3.6 was the MCP lol. I gave it the max, and 3.8 ghz and it booted, but the vcore vdroop was being annoying, and it kept on getting bsod on boot. I will pencil mod it later. Thanks a lot james.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search