Update: Celery [email protected] 1.6V

Well, What can I say? Im Happy, but I want that 1.6. Im at 128fsb, dividers are 3-3-1, voltage at 1.6. I get errors @ 129fsb, im at about 28C idle watercooled. Any suggestions to help me get any higher? Thanks.

Vidpin that thing and since your on water cooling shoot that chip straight up to 1.825v and try for 1.6 I have money on it that you'llg et it.

Try upping the voltage. There are several threads here on how to do the voltage mod on the st6.
By the way, at those dividers I'm amazed that your hard drive is still functioning.You might want to consider going to 4 4 1.
Good luck.

You have not tried 441 yet. I never have ran my cel 1.2 at anything above 120fsb without the 441 setting. I currently have it at 1.5GHz/125MHz fsb with a 441 setting happier than a puppy with two peckers!

Ol'Man, i tried the 4-3-1, 4-4-1, but my system seems a *bit* slower per 3DMark2001, it went from 6900 at 3-3-1 to 6400 4-4-1, dunno why. Seems happy right now. Im a 129fsb 3-3-1, no hangs yet. Maybe she like the speed eh?

NovaCX12 said:

Ol'Man, i tried the 4-3-1, 4-4-1, but my system seems a *bit* slower per 3DMark2001, it went from 6900 at 3-3-1 to 6400 4-4-1, dunno why. Seems happy right now. Im a 129fsb 3-3-1, no hangs yet. Maybe she like the speed eh?

Click to expand...

That's probably because your PCI and AGP are running way over spec. At 129FSB using 3:3:1 your PCI bus will be running at 43 and AGP at around 86. Considering spec is 33 for PCI and 66 for AGP this could be causing some of your problems. At 129FSB using 4:4:1 you'll be at around 32 for PCI and 64 for AGP. Much closer to spec and much more likely to be stable. I'd try 4:4:1 then go for 133 & see what happens. At 133FSB using 4:4:1 PCI and AGP will be in spec.

NovaCX12 said:

Ol'Man, i tried the 4-3-1, 4-4-1, but my system seems a *bit* slower per 3DMark2001, it went from 6900 at 3-3-1 to 6400 4-4-1, dunno why. Seems happy right now. Im a 129fsb 3-3-1, no hangs yet. Maybe she like the speed eh?

Click to expand...

Well usually you have to do 2-3 as some maybe better than others don't know why.

But Sempei is right when your going 133fsb and going 3-3-1 then everything would be unstable because your HDD will be running way over speced.