• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

WC rig is all set up. (Temps)

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Talimdor

Registered
Joined
Oct 8, 2008
Pictures are coming later but first off I figured I'd throw some temps around. Currently 19 degrees C roughly in the house at the time of this initial testing.

[email protected] ghz idle (according to Coretemp)
Core 0- 33
Core 1- 33
Core 2- 27
Core 3- 26

Load (Prime 95 64bit version using blend testing)
This is where I am having some interesting results. I obviously don't have the system completely stable at this point as I have locked the computer twice while running the program two different times. But anyways as for my initial results. It really depends on which test is being run. As I am not familiar with what scores would normally be reported I've recorded some of the different test results.

With an FFT length of 1024k
Max temps /Average Temps
42 / 40
42 / 40
37 / 35
35 / 34

FFT length of 8k (this is where it has been freezing at some point during these test cycles. I'm going to have to do some research and see what these FFT lengths are etc...)
Max temps / Average Temps
50 /46
50 /46
44 /40
44 /39

I plan to run some more tests tonight or tomorrow and hopefully resolve the issue with locking up since it has required a hard restart. I'll post some pics later on in a different thread as I'll reserve this one for my temps and other explorations.

WC system (in current loop order)
Swiftech Microres
MP355 XSPC top
MCR320QP(Yate loon M's)
Swiftech GTZ
MCR320QP(Yate loon M's)
DD Maze 5
DD Maze 5

On a side note my gpu temps are great :clap: running at 32 C idle and not going over 35 C in COD4 all max settings (which is as graphically intensive as I get currently). These cards are EVGA 8800gt's in sli at stock clocks.
 
Back