hi every1,i have 2 sticks of 2 gig of ram each i cant get it to run at full speed(1066)viper xtreme performance pc2-8500 with timins as follows 5,5,5,15 and 2,.1 volts, it runs fine at 800mhz,but if i set it to 1066 i get bsod.my specs are intel e8500 oc to 3.6and no voltage increases,p52 deluxe,vista 32.
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
need help please
- Thread starter madas1
- Start date
- Joined
- Sep 5, 2008
tRFC needs to be about 60
- Joined
- Sep 5, 2008
lol...most of us dream of 500 FSB.
- Joined
- Sep 5, 2008
I don't have any experience w/ DDR3. With 2x2 GB DDR2, tRFC is the most frequent cause of instability.
I'm using 2x2gb of ddr3. I have a completely stable OC on my Q9450 @ 3.01Ghz. Passed prime, passed memtest 86.
I Cant get stable at 400Mhz FSB though. which would take me up to 3.2Ghz. I passed 6 hrs of small fft, but fail the other 2 instantly. I also fail memtest86 after 75% at 400FSB.
I Cant get stable at 400Mhz FSB though. which would take me up to 3.2Ghz. I passed 6 hrs of small fft, but fail the other 2 instantly. I also fail memtest86 after 75% at 400FSB.
