Motherboard or PSU

wingman99 · 02-05-09, 08:35 PM

Pc use to OC well and also ran just fine, Now when the pc is off for a long while and you try to boot it up it will start to load windows, then it will restart the boot up on it's own, then it will fully load windows after the failed shutdown screen and then it runs just fine after that. Now when i try to overclock it wont boot until the 3d try and then it only boots up to default settings.

FSP 400w PSU
1 LG 20X DVD±R DVD Burner
1 Hard drive
Celeron E1200 1.6GHz
GA-EG31M-S2 LGA 775 MB

My DVM battery is low so i will get a new one tomorrow

AlabamaCajun · 02-08-09, 02:16 PM

Start with the battery change. Components do age so it is normal to see some loss of OC because not all the components are as tight as they were.

wingman99 · 02-08-09, 02:43 PM

It's 3 moths old and it will not overclock past stock 200 fsp is it wont go to 202 fsb i already cleared Bios.

AlabamaCajun · 02-08-09, 03:33 PM

My bad, saw the note on your voltmeter and mistook that for CMOS bat which lead me to believe this was an old system you've had for a while.
I would suspect a RAM issue if after you put the volt meter on it and find 11.58-12.12V.

wingman99 · 02-08-09, 04:17 PM

It runs fine just wont start some times with out rebooting it self also wont overclock at all now like it use to.

The memory works fine DDR2 800

RollingThunder · 02-08-09, 05:36 PM

Quote:

Originally Posted by wingman99

It runs fine just wont start some times with out rebooting it self also wont overclock at all now like it use to.

The memory works fine DDR2 800

Wingman, can you also get a look at your PS and MB capacitors, see if they are bulged or leaking?

wingman99 · 02-09-09, 06:10 PM

Well i replaced PSU and now the pc boots into widows all the time without restarting, one main problem solved, however it still won't overclock one bit, it won't beep or post if i try any OC combination.

02-05-09, 08:35 PM	Thread Starter #1
wingman99 Member Join Date: Dec 2003	Motherboard or PSU Pc use to OC well and also ran just fine, Now when the pc is off for a long while and you try to boot it up it will start to load windows, then it will restart the boot up on it's own, then it will fully load windows after the failed shutdown screen and then it runs just fine after that. Now when i try to overclock it wont boot until the 3d try and then it only boots up to default settings. FSP 400w PSU 1 LG 20X DVD±R DVD Burner 1 Hard drive Celeron E1200 1.6GHz GA-EG31M-S2 LGA 775 MB My DVM battery is low so i will get a new one tomorrow Last edited by wingman99; 02-14-09 at 12:58 AM.
	QUOTE Thanks

02-08-09, 02:16 PM	#2
AlabamaCajun Join Date: Apr 2005 Location: A Labyrinth	Start with the battery change. Components do age so it is normal to see some loss of OC because not all the components are as tight as they were. __________________ Main Rigs Developement -Phen2 1090T on Asus 870 Fun -Callisto 555BE, Asus 990FX Sabortooth,ATI HD3870 CDs, Labels, Printing etc- 5000BBE, GA790FX, Wintec 800 4G.HD2600XT Rendering Server- 4x Barcelona 8347s. Tyan S4980 Quad, 16G (2G Kingston per socket). Folding, Testing- Vista, Regor 265 X2 on Asus 880, dead- Phen2-940 AM2, DFI790FX-M2R,Corsair-PC6400 CL4 Theme Park Builder 3D The Game- Build-em and Ride-em.
	QUOTE Thanks

02-08-09, 02:43 PM	Thread Starter #3
wingman99 Member Join Date: Dec 2003	It's 3 moths old and it will not overclock past stock 200 fsp is it wont go to 202 fsb i already cleared Bios.
	QUOTE Thanks

02-08-09, 03:33 PM	#4
AlabamaCajun Join Date: Apr 2005 Location: A Labyrinth	My bad, saw the note on your voltmeter and mistook that for CMOS bat which lead me to believe this was an old system you've had for a while. I would suspect a RAM issue if after you put the volt meter on it and find 11.58-12.12V. __________________ Main Rigs Developement -Phen2 1090T on Asus 870 Fun -Callisto 555BE, Asus 990FX Sabortooth,ATI HD3870 CDs, Labels, Printing etc- 5000BBE, GA790FX, Wintec 800 4G.HD2600XT Rendering Server- 4x Barcelona 8347s. Tyan S4980 Quad, 16G (2G Kingston per socket). Folding, Testing- Vista, Regor 265 X2 on Asus 880, dead- Phen2-940 AM2, DFI790FX-M2R,Corsair-PC6400 CL4 Theme Park Builder 3D The Game- Build-em and Ride-em.
	QUOTE Thanks

02-08-09, 04:17 PM	Thread Starter #5
wingman99 Member Join Date: Dec 2003	It runs fine just wont start some times with out rebooting it self also wont overclock at all now like it use to. The memory works fine DDR2 800
	QUOTE Thanks

Motherboard or PSU

Internet Services

Website Development

Tech Hardware

02-09-09, 06:10 PM	Thread Starter #7
wingman99 Member Join Date: Dec 2003	Well i replaced PSU and now the pc boots into widows all the time without restarting, one main problem solved, however it still won't overclock one bit, it won't beep or post if i try any OC combination.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search