Q6600 3.2GHZ voltage

hi, the Vcore for my q6600 g0 at speed 3.2ghz is currenly as 1.3, prime(24hr) stable. Memtest(8hours) stable..idle 28-32. Load 100% 45-50 and after 6 hours of crsis at 35.

i just wana know, is my voltage high,average or quiet low for a 3.2?

heres my settings

bus speed : 355
rated FSB : 1423
multiplier : x9

Temps. If good temps yes your fine.

Don't worry about crysis, it doesn't load the CPU much.

Bump it up, see what clocks you can get for prime at 60C, then your good.

Your fine right now.

man i hate crysis, requirements are soo high. requires sli and so on, but dosent work much on the cpu. wa te hell? that stupid badly coded game with some crappy engine which rag-doll physic sucks big time requires every single bit it can steal from the system, but a old BETTER GRAPHIC half-life2 with EXCELLENT engine and REAL-TIME ragdoll physic only requires a bit, even my crappy pentium D and a 9600 can run it on maximum . see the differents?